1. Pengenalan dan Selesai Produkview
The OSRAM ENDURA FLOOD PC 50W LED Projector with Sensor is a high-performance outdoor lighting solution designed for security and general illumination. It features a powerful 50W LED light source, emitting 5000 lumens of 3000K warm white light. Equipped with an intelligent motion sensor, this projector offers advanced detection capabilities for large areas such as industrial spaces, garages, and facades. Its robust construction and IP44 rating ensure reliable operation in various outdoor conditions.
This manual provides essential information for the safe installation, operation, and maintenance of your OSRAM ENDURA FLOOD PC 50W LED Projector.
2. Maklumat Keselamatan
- Keselamatan Elektrik: Installation and maintenance should only be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure the power supply is disconnected before any installation or servicing.
- Voltage: Produk ini beroperasi pada 220 Volt AC. Sahkan bekalan kuasa anda sepadan dengan keperluan ini.
- Pemasangan: Securely mount the projector to a stable surface. Improper mounting can lead to the unit falling and causing injury or damage.
- Penilaian IP44: The IP44 rating indicates protection against solid objects larger than 1mm and splashing water from any direction. Do not submerge the unit in water or expose it to high-pressure water jets.
- haba: The LED projector may become warm during operation. Avoid touching the light surface directly when in use.
- Sumber Cahaya: Do not stare directly into the LED light source when it is illuminated, as this may cause eye discomfort or damage.
3. Kandungan Pakej
Sila semak pakej untuk item berikut:
- 1x OSRAM ENDURA® Flood Sensor Warm White PCR 50W Dark Grey LED Projector
- Manual Arahan (dokumen ini)
Image 3.1: OSRAM ENDURA FLOOD PC 50W LED Projector with its retail packaging.
4. Persediaan dan Pemasangan
The OSRAM ENDURA FLOOD PC 50W LED Projector is designed for wall mounting and surface installation. It is suitable for outdoor use in areas such as garages and facades.
4.1 Memasang Projektor
- Pilih Lokasi: Select a suitable wall mounting location that provides the desired illumination coverage and allows for optimal motion sensor detection. Consider the 9-meter detection range.
- Tandakan Titik Penggerudian: Gunakan pendakap pelekap sebagai templat untuk menandakan titik penggerudian pada dinding.
- Lubang gerudi: Drill holes at the marked points and insert appropriate wall plugs (not included, choose based on wall material).
- Kurungan Selamat: Pasang pendakap pelekap ke dinding menggunakan skru.
- Attach Projector: Securely attach the projector to the mounting bracket. Adjust the angle of the projector to direct the light as needed.
4.2 Sambungan Elektrik
- Putuskan Kuasa: Pastikan bekalan kuasa utama ke kawasan pemasangan dimatikan pada pemutus litar.
- Sambungan wayar: Connect the projector's electrical wires to your main power supply (220V AC) according to local electrical codes. Ensure proper grounding.
- Sambungan Selamat: Use appropriate waterproof connectors and junction boxes for outdoor installations to maintain the IP44 rating.
- Pulihkan Kuasa: Once all connections are secure and verified, restore power to the circuit.
Imej 4.1: Depan view of the OSRAM ENDURA FLOOD PC 50W LED Projector, showing the main light panel and the integrated motion sensor.
5. Arahan Operasi
The OSRAM ENDURA FLOOD PC 50W LED Projector features an integrated motion sensor for automatic operation.
5.1 Motion Sensor Adjustment
Sensor gerakan biasanya mempunyai tetapan boleh laras untuk:
- Detection Range (SENS): Adjusts the sensitivity of the sensor, influencing the maximum distance at which motion is detected (up to 9 meters).
- Time Duration (TIME): Sets how long the light remains on after motion is detected and no further motion is sensed (typically 10 seconds to 8 minutes).
- Light Sensitivity (LUX): Determines the ambient light level at which the sensor becomes active. For example, setting it to a low LUX value means the light will only activate in very dark conditions, while a high LUX value allows it to activate in brighter conditions (typically 10-2000 lux).
Refer to the markings on the sensor unit for specific adjustment dials or switches. Test the settings after adjustment to ensure desired operation.
5.2 Operasi Ringan
Once installed and configured, the projector will automatically turn on when motion is detected within its range and the ambient light level is below the set LUX threshold. The light will remain on for the set time duration and turn off if no further motion is detected.
6. Penyelenggaraan
The OSRAM ENDURA FLOOD PC 50W LED Projector is designed for minimal maintenance. However, regular checks can ensure optimal performance and longevity.
- Pembersihan: Periodically clean the surface of the projector and the sensor lens with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or the sensor. Ensure the power is off before cleaning.
- Pemeriksaan: Regularly inspect the mounting and electrical connections for any signs of wear, damage, or corrosion. Address any issues promptly.
- Jangka hayat LED: The integrated LED light source has a long operational life of approximately 30,000 hours and is not user-replaceable.
7. Penyelesaian masalah
If you encounter issues with your projector, refer to the following troubleshooting guide:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | No power supply. Incorrect LUX setting. Sensor blocked. | Check circuit breaker. Adjust LUX setting to a lower value or 'daylight' mode for testing. Clear any obstructions from the sensor. |
| Lampu kekal menyala secara berterusan. | Continuous motion detected. LUX setting too high. Faulty sensor. | Ensure no constant movement in detection zone. Adjust LUX setting to a higher value. Contact support if sensor is faulty. |
| Lampu menyala pada siang hari. | LUX setting too high. | Adjust LUX setting to a lower value (e.g., 'night' mode) so it only activates in darker conditions. |
| Motion not detected. | Detection range too low. Sensor blocked or misaligned. | Increase detection range (SENS) setting. Clear sensor lens. Re-align sensor for optimal coverage. |
8. Spesifikasi
Detailed technical specifications for the OSRAM ENDURA FLOOD PC 50W LED Projector:
| Ciri | Spesifikasi |
|---|---|
| Jenama | OSRAM |
| Pengeluar | LEDVANCE |
| Nombor Model | 4099854487279 |
| Dimensi Produk (L x W x H) | 17 x 7 x 22.3 cm |
| Berat badan | 720 gram |
| warna | Kelabu Gelap |
| bahan | Aluminum (body), Glass (shade) |
| kuasa | 50 Watt |
| Fluks Bercahaya | 5000 lumen |
| Suhu Warna | 3000 Kelvin (Putih Hangat) |
| Voltage | 220 Volt (AC) |
| Penarafan IP | IP44 |
| Tukar Gaya | Pengesan Pergerakan |
| Jenis Pemasangan | Lekap di Dinding, Lekap Permukaan |
| Kegunaan Khusus | Garage, Facades, Outdoor |
| Kelas Kecekapan Tenaga | F |
| Julat Penderia Pergerakan | Sehingga 9 meter |
| Motion Sensor Time Duration | 10 saat - 8 minit |
| Motion Sensor Light Sensitivity | 10 - 2000 lux |
Image 8.1: Dimensional drawing of the OSRAM ENDURA FLOOD PC 50W LED Projector, showing measurements in millimeters.
9. Waranti dan Sokongan
This OSRAM ENDURA FLOOD PC 50W LED Projector comes with a Waranti 3 tahun dari tarikh pembelian. Sila simpan bukti pembelian anda untuk tuntutan waranti.
For technical support, warranty claims, or further inquiries, please contact OSRAM customer service or visit the official OSRAM/LEDVANCE weblaman web. Maklumat hubungan biasanya boleh didapati pada pembungkusan produk atau pengilang webtapak.
Pengeluar: LEDVANCE
