pengenalan
This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your new Bianchi OLTRE RACE 105 12SP [YTB8D] Road Bike. Please read this manual thoroughly before using your bicycle to ensure safe and optimal performance. Keep this manual for future reference.
Nota Penting: Images in this manual are for illustrative purposes only. Some components may vary slightly from the actual product. Specifications are subject to change without prior notice.
Maklumat Keselamatan
Always wear a helmet when riding. Ensure all quick releases and bolts are properly tightened before each ride. Regularly inspect your bicycle for any signs of wear or damage. Familiarize yourself with local traffic laws and regulations.
- Perform a pre-ride safety check before every use.
- Pastikan brek berfungsi dengan betul.
- Periksa tekanan tayar sebelum setiap perjalanan.
- Be visible to motorists, especially at night.
- Jangan menunggang di bawah pengaruh alkohol atau dadah.
Persediaan dan Perhimpunan
Your Bianchi OLTRE RACE road bike may require some assembly upon arrival. It is recommended that assembly and initial setup be performed by a qualified bicycle mechanic to ensure proper function and safety.
Membongkar
Carefully remove the bicycle and all components from the packaging. Inspect for any shipping damage immediately.
Pemasangan Hendal
Attach the handlebar to the stem, ensuring the correct orientation. Tighten the stem faceplate bolts evenly to the manufacturer's specified torque settings. Refer to the component manufacturer's manual for precise torque values.
Pemasangan Roda
Install the front and rear wheels. Ensure the quick release skewers or thru-axles are properly secured and tightened. Check that the brake rotors are correctly aligned within the calipers.
Figure 1: Fully assembled Bianchi OLTRE RACE 105 12SP Road Bike. This image shows the complete bicycle from the side, highlighting its frame, wheels, and drivetrain components.
Seatpost and Saddle Adjustment
Insert the seatpost into the frame and adjust the saddle height for comfortable and efficient pedaling. Ensure the seatpost clamp is tightened to the specified torque. The saddle angle can also be adjusted for comfort.
Mengendalikan Basikal Anda
Menukar Gear
Your Bianchi OLTRE RACE is equipped with a Shimano 105 12-speed drivetrain. Use the shifters on the handlebars to change gears. The right shifter typically controls the rear derailleur (larger gear changes), and the left shifter controls the front derailleur (smaller, more precise changes).
- Derailleur Belakang: Shift to a larger cog for easier pedaling (uphill) and a smaller cog for harder pedaling (downhill/speed).
- Front Derailleur: Shift to the smaller chainring for easier pedaling and the larger chainring for harder pedaling.
Brek
The bicycle features Shimano 105 hydraulic disc brakes. The right brake lever typically controls the front brake, and the left brake lever controls the rear brake. Apply both brakes simultaneously for effective stopping power. Avoid sudden, hard braking, especially with the front brake, to prevent loss of control.
Kedudukan Menunggang
Maintain a comfortable and aerodynamic riding position. Adjust saddle height and handlebar position as needed to optimize comfort and power transfer.
Penyelenggaraan dan Penjagaan
Regular maintenance is crucial for the longevity and safe operation of your Bianchi road bike. Perform routine checks and cleaning as described below.
Pembersihan
Clean your bicycle regularly with mild soap and water. Avoid high-pressure washers, which can force water into bearings and seals. Dry thoroughly after washing.
Pelinciran
Lubricate the chain regularly, especially after riding in wet conditions. Apply a suitable bicycle chain lubricant and wipe off excess. Periodically lubricate pivot points on derailleurs and brake levers.
Tekanan Tayar
Check tire pressure before each ride. Refer to the sidewall of your tires for the recommended pressure range. Proper tire pressure improves ride quality, efficiency, and reduces the risk of punctures.
Pelarasan Brek dan Gear
Periodically check brake pad wear and adjust cable tension if necessary (for mechanical brakes, though this model has hydraulic). Ensure gears shift smoothly and precisely. If you experience issues, consult a qualified mechanic.
Pemeriksaan Komponen
Regularly inspect all bolts and fasteners for tightness. Check the frame and fork for any cracks or damage. Inspect wheels for trueness and spoke tension.
Menyelesaikan Masalah Isu Biasa
| Isu | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Gear tidak beralih dengan lancar | Cable tension incorrect, dirty drivetrain, bent derailleur hanger | Adjust cable tension, clean and lubricate chain/derailleurs, inspect derailleur hanger |
| Brek terasa seperti span atau lemah | Air in hydraulic lines, worn brake pads, contaminated rotors | Bleed hydraulic brakes, replace brake pads, clean rotors with disc brake cleaner |
| Tires frequently flat | Puncture, low tire pressure, damaged rim tape | Inspect tire for foreign objects, maintain proper tire pressure, replace rim tape |
| Bunyi-bunyi berderit | Loose components (seatpost, stem, bottom bracket), dry bearings | Tighten all bolts to spec, lubricate moving parts, service bearings |
For complex issues or if you are unsure about a repair, it is highly recommended to consult a professional bicycle mechanic.
Spesifikasi
The following table outlines the key specifications for the Bianchi OLTRE RACE 105 12SP [YTB8D] Road Bike. Note that specifications are subject to change by the manufacturer without notice.
Figure 2: Technical specifications overview for the Bianchi OLTRE RACE. This image details the frame material, fork type, color options, available sizes, and product code.
Figure 3: Detailed technical features of the Bianchi OLTRE RACE, including components like shifters, derailleurs, crankset, brakes, wheels, and cockpit parts.
Figure 4: Geometry chart for the Bianchi OLTRE RACE, providing detailed measurements for various frame sizes to assist with fit and setup.
| Komponen | Perincian |
|---|---|
| Nama Model | OLTRE RACE 105 12SP [YTB8D] |
| Bingkai | OLTRE RACE AERO CARBON, compatible with mechanical/electronic transmissions, internal cable routing, BB-Pressfit 86.5x41, integrated seat clamp, disc brake flat mount, thru axle 12x142 |
| garpu | FULL CARBON AERO ROAD 1.4"-1.5" integrated head, disc brake flat mount, thru axle 12x100 |
| warna | ZK - CK16 / METALLIC CELESTE FULL GLOSSY |
| Saiz | 50 (other sizes 44, 47, 53, 55, 57 may be available) |
| Alat dengar | ACROS & FSA, for internal cable routing |
| Penukar | Shimano 105, ST-R7120, BR-R7170 |
| Derailleur Belakang | Shimano 105, RD-R7100 |
| Derailleur Depan | Shimano 105, FD-R7100 |
| Set engkol | Shimano 105, FC-R7100, 50X34T, Crank Length: 165mm-44cm, 170mm-47/53cm |
| Kurung Bawah | Shimano, SM-BB72-41B, Press Fit for Road, Bearing, Inner Cover |
| rantai | Shimano, CN-M6100 |
| Kaset | Shimano 105, CS-R7101, 11-12-13-14-15-17-19-21-24-27-30-34T |
| Caliper brek | Shimano 105, BR-R7170 |
| Pemutar Brek | Shimano, SM-RT70, Center Lock, 160mm Front/Rear |
| roda | Velomann V30R, Alloy, 30mm Profile, HG11 |
| tayar | Vittoria, Rubino Tube Type, 700x28C, Graphene |
| Batang | Velomann, Alloy 6061, Raise -7°, Ext: 80mm-44cm, 90mm-47/50cm, 100mm-53/55cm, 110mm-57cm |
| Bar hendal | Velomann RA83A Aero Compact, Alloy 6061, Diam. 31.8mm, Reach 70mm, Drop 120mm |
| Cengkaman | Bianchi Cork, Black |
| Tiang tempat duduk | Velomann Full Carbon Aero Shape, Special Clamp Type with Alloy Head |
| pelana | Velomann Seta S1, 278 x 144mm |
Waranti dan Sokongan
Bianchi bicycles typically come with a manufacturer's warranty covering defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and component. Please retain your proof of purchase for warranty claims.
Tuntutan Waranti
In the event of a warranty claim, please contact the authorized Bianchi dealer where you purchased the bicycle. They will guide you through the process and assist with any necessary repairs or replacements.
Sokongan Pelanggan
For technical assistance, spare parts, or general inquiries, please contact your local Bianchi dealer or visit the official Bianchi website for support resources. Always provide your bicycle's model and serial number when seeking support.
Nota: Unauthorized modifications or improper maintenance may void your warranty.
