SCULPFUN C1 Mini Laser Engraver User Manual

1. Pengenalan

The SCULPFUN C1 Mini Laser Engraver is a compact and portable 3W diode laser machine designed for high-precision engraving on a wide variety of materials. Its ultra-fine 0.04mm laser spot allows for detailed imaging, making it suitable for DIY enthusiasts and beginners. This manual provides essential information for safe and effective use, including setup, operation, maintenance, and troubleshooting.

2. Maklumat Keselamatan

AMARAN: Produk ini mengandungi laser Kelas IV. Pendedahan langsung kepada pancaran laser boleh menyebabkan kerosakan mata yang teruk dan kulit melecur. Sentiasa pakai cermin mata pelindung semasa mengendalikan mesin. Jangan sekali-kali melihat terus ke dalam pancaran laser.

• Laser Class: IV
• Laser Output: 3000mW
• Ensure proper ventilation when operating, as engraving can produce fumes. Use in a well-ventilated area or with an exhaust system.
• Do not engrave highly reflective materials without proper precautions.
• Jauhkan daripada kanak-kanak dan haiwan peliharaan.
• The machine is not recommended for cutting tasks or engraving bare metals due to limited power.
• The protective cover (if used) helps meet Class 1 laser engraving machine standards and enhances safety by stopping operation when opened.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej anda:

• C1 Machine Body
• Kepala Laser
• Metal Protective Plate
• Acrylic Focusing Sheet
• Manual Pengguna (dokumen ini)
• Penyesuai Kuasa
• Repair Tools (Allen wrenches, wrench)
• Data Cable (USB-A to USB-C)
• Cermin Mata Pelindung
• Metal Business Card (sample)
• Kraft Paper (sample)
• Plywood (sample)
• Kain Pembersih

Image: All components included in the SCULPFUN C1 Mini Laser Engraver package.

4. Persediaan dan Pemasangan

The SCULPFUN C1 is designed for easy, one-step installation. Follow these steps to set up your engraver:

1. Membuka kotak: Carefully remove all components from the packaging. The main machine body comes pre-assembled.
2. Install Laser Head: Remove the magnetic protective cover from the laser head. Insert the laser head into its designated slot on the gantry. Secure it with the provided screw using the appropriate repair tool.
3. Sambungkan Kabel:
   • Connect the laser head cable to the port on the gantry.
   • Connect the power adapter to the power port on the machine and plug it into a wall outlet.
   • Connect the data cable (USB-A to USB-C) from the machine's data port to your computer.
4. Pemasangan Perisian:

   The SCULPFUN C1 is compatible with professional laser engraving software such as LightBurn (additional purchase) and LaserGRBL (free and open-source). For Windows 7 systems, it may be necessary to install a driver. For Windows 10/11 and MacOS, the machine is typically driver-free.

   Refer to the user manual (PDF) or scan the QR code provided in the physical manual for direct download links and detailed instructions for software setup and driver installation.

5. Initial Power On & Homing: Double-click the power button on the machine to initiate the homing sequence. The laser head will move to its home position, indicating it's ready for operation.

Image: Close-up of the SCULPFUN C1 showing the laser head being inserted into the gantry.

Image: SCULPFUN C1 with power and data cables connected, ready for software interface.

5. Arahan Operasi

Once set up, the SCULPFUN C1 is ready for engraving. Ensure your material is placed flat on the working area.

1. Peletakan Bahan: Place the material to be engraved within the 150x130mm working area.
2. Memfokuskan: Use the provided acrylic focusing sheet to set the correct focal distance for the laser. Place the sheet under the laser head and adjust the laser head's height until the laser spot is at its finest point on the material. Secure the laser head.
3. Antaramuka Perisian: Open your chosen software (LightBurn or LaserGRBL). Import your desired image (supports JPG, PNG, BMP, GIF, SVG, AI, etc.).
4. Tetapan Parameter: Adjust engraving parameters such as speed, power, and interval based on your material and desired effect. The C1 can reach a maximum speed of 10000mm/min for some materials.
5. Pembingkaian: Use the "Frame" function in the software to preview the engraving area on your material. This helps ensure correct positioning.
6. Mula Mengukir: Once satisfied with the settings and framing, initiate the engraving process from the software.

Imej: Cthamples of materials that can be engraved with the SCULPFUN C1, including wood, anodized surfaces, leather, slate, acrylic, kraft paper, leaves, and colored cardstock.

Image: Illustration of the 0.04mm ultra-fine laser spot, highlighting its precision for detailed engraving.

6. Penyelenggaraan

Regular maintenance ensures optimal performance and extends the lifespan of your SCULPFUN C1.

6.1. Laser Lens Cleaning

Dust and debris can accumulate on the laser lens, affecting engraving quality. Clean the lens regularly:

1. Matikan dan cabut plag mesin.
2. Carefully remove the magnetic protective cover from the laser head.
3. Unscrew and remove the black lens cap from the bottom of the laser head.
4. Use a clean cotton swab lightly dampened with lens cleaning solution (or isopropyl alcohol) to gently wipe the lens. Avoid excessive pressure.
5. Allow the lens to dry completely before reassembling the lens cap and protective cover.

6.2. Pelarasan Tali Pinggang

Ensure the belts are properly tensioned for accurate movement of the laser head.

1. Inspect the belts for any looseness or wear.
2. If a belt is loose, use the provided repair tools to adjust the tensioning screws on the belt mechanism until the belt is taut but not overly tight.
3. For balance adjustment, loosen the screws on the coupling, push the gantry fully against the frame, and then re-tighten the screws. This ensures both sides of the gantry are aligned.

7. Penyelesaian masalah

• Machine not connecting to computer:
  • Ensure the data cable is securely connected to both the machine and the computer.
  • Verify the machine is powered on (green light should be steady or flashing).
  • For Windows 7, check if the necessary drivers are installed. Refer to the software installation section.
  • Try a different USB port or data cable.
• Engraving quality is poor/faint:
  • Check the laser focus. Re-focus the laser using the acrylic focusing sheet.
  • Clean the laser lens as described in the Maintenance section.
  • Adjust software parameters (increase laser power, decrease speed, or reduce interval).
  • Ensure the material is suitable for laser engraving and is placed flat.
• Machine not moving correctly/making grinding noises:
  • Check for any obstructions in the gantry's path.
  • Inspect and adjust the belts for proper tension as described in the Maintenance section.
  • Ensure the machine is on a stable, level surface.
• Strong fumes/smell during engraving:
  • This is normal for many materials. Ensure adequate ventilation. Operate in a well-ventilated room, near an open window, or use an external fume extractor.

8. Spesifikasi

Imej: Terperinci view of the SCULPFUN C1 showing product dimensions and port locations.

9. Waranti dan Sokongan

For detailed warranty information and technical support, please refer to the official SCULPFUN webtapak atau PDF Manual Pengguna penuh yang disediakan bersama produk anda.

You can download the official User Manual PDF di sini.