1. Pengenalan
The AUTOOL LM120+ Refrigeration Digital Manifold Gauge Meter is an intelligent electronic instrument designed for the installation, testing, and maintenance of refrigeration equipment such as air conditioners, refrigerators, and cold storage units. It offers multiple test modes, intelligent digital display, and a built-in refrigerant database for efficient operation, making it a versatile tool for professionals.
Figure 1: AUTOOL LM 120 Digital Manifold Gauge Meter and accessories.
2. Panduan Persediaan
Follow these steps to properly set up your AUTOOL LM 120 Digital Manifold Gauge Meter:
- Keadaan awal: Before operation, ensure both the low pressure (blue) and high pressure (red) valves on the manifold gauge are in the closed position.
- Connect Temperature Clamps: Connect the two temperature-test clamps to their respective sockets on the manifold gauge. These clamps are essential for accurate temperature readings during testing.
Figure 2: Connecting the temperature clamps for high and low pressure temperature testing.
- Hidupkan kuasa: Press the power switch on the manifold gauge to turn on the device. The LCD display will illuminate, showing current readings and settings.
- Connect Tubes: Connect the blue, yellow, and red tubes to the corresponding ports on the manifold gauge. Ensure connections are secure to prevent leaks.
- Connect Refrigerant Quick Connectors: Attach the refrigerant quick connectors to the appropriate service ports on the refrigeration system (e.g., vehicle AC system). The red connector typically goes to the high-pressure port, and the blue to the low-pressure port.
Video 1: Demonstrates the setup and connection process for the AUTOOL LM 120 Digital Manifold Gauge Meter, including connecting temperature clamps and refrigerant tubes to a vehicle's AC system.
3. Arahan Operasi
The AUTOOL LM 120 offers various functions for comprehensive refrigeration system analysis:
3.1. Operasi vakum
To perform a vacuum operation, ensure all connections are secure. Open the necessary valves on the manifold gauge to initiate the vacuum process. The gauge will display the vacuum degree, allowing you to monitor the system's evacuation.
3.2. Refrigerant Filling
- Connect Refrigerant Container: After vacuuming, connect a new refrigerant container to the yellow service hose of the manifold gauge.
- Prepare Vehicle (if applicable): If working on a vehicle, start the engine and adjust the air conditioner to its lowest temperature setting to ensure the system is ready for refrigerant intake.
- Inlet Refrigerant: Slowly open the appropriate valves on the manifold gauge to allow the new refrigerant to enter the system. Monitor the pressure readings on the digital display to ensure proper filling.
3.3. Multiple Test Modes
The LM 120 supports various test modes:
- Dual Pressure Measurement: Measures both high and low pressures simultaneously.
- Dual Temperature Measurement: Measures high and low pipeline temperatures using the connected test clamps.
- Vacuum Degree Measurement: Memaparkan peratusantage of vacuum achieved.
- Pressure Leakage Measurement: Calculates pressure difference over time to detect leaks.
- Penukaran Unit: Easily switch between pressure units (Kpa, Mpa, bar, inHg, PSI) and temperature units (Celsius/Fahrenheit).
Figure 3: Display showing Evaporation Pressure & Temperature Test results.
Figure 4: Display showing Condensing Pressure & Temperature Test results.
Figure 5: Display showing Pressure Leakage Test results.
3.4. Built-in Database
The LM 120 features a built-in database of 89 kinds of refrigerant pressure and evaporation temperatures. This allows the device to automatically calculate supercooling and superheating temperatures, providing convenient and direct access to critical operational data.
Figure 6: Setting refrigerant type and observing filling status through the viewable window.
4. Penyelenggaraan
Proper maintenance ensures the longevity and accuracy of your AUTOOL LM 120 Digital Manifold Gauge Meter:
- Pembersihan: Lap peranti secara berkala dengan kain lembut dan kering. Elakkan menggunakan pembersih atau pelarut yang kasar yang boleh merosakkan paparan atauasing.
- Storan: After each use, carefully uninstall all quick connectors and tubes. Turn off the manifold gauge. Pack the equipment securely in its carrying case to protect it from dust, moisture, and physical damage.
- Pemeriksaan Komponen: Periodically inspect the hoses, connectors, and temperature clamps for any signs of wear, cracks, or damage. Replace any worn components to maintain optimal performance and prevent refrigerant leaks.
- Ketahanan: The LM 120 is constructed with high-strength engineering plastic, flexible non-slip silicone, and copper interfaces, designed for industrial-grade durability. Proper handling and storage will further extend its service life.
5. Penyelesaian masalah
If you encounter issues with your AUTOOL LM 120, consider the following:
- Bacaan Tidak Tepat: Ensure all connections are tight and free of leaks. Verify that the correct refrigerant type is selected in the device settings. If persistent, contact customer support for potential calibration needs.
- Temperature Sensor Issues: Check the connection of the temperature clamps. Ensure they are securely attached to the pipes for accurate readings. If clamps are damaged, they may need replacement.
- Tiada Paparan/Kuasa: Check battery levels. Ensure the power button is pressed firmly.
- Hose Leaks: Inspect hoses and their connections for any visible damage or loose fittings. Tighten connections or replace hoses if necessary.
- Fungsi vakum: Note that the LM 120 measures relative vacuum degree and does not display micron readings. If micron-level vacuum measurement is required, a different model may be necessary.
For issues not covered here, please refer to the detailed product manual or contact AUTOOL customer support.
6. Spesifikasi
| Parameter | Nilai |
|---|---|
| Nombor Model Item | LM 120 |
| Pengeluar | AUTOOL |
| bahan | Crystal, Silicone |
| Dimensi Item L x W x H | 0.01 inci |
| Berat Barang | 950 Gram |
| Saiz Skrin | 12 Inci |
| Pressure Test Type | Tekanan permukaan |
| Pressure Test Units | Kpa; Mpa; bar; inHg; PSI |
| Julat Ujian Tekanan | 0 Kpa - 6000 Kpa |
| Resolusi Ujian Tekanan | 1 Kpa |
| Ketepatan Ujian Tekanan | +/- 0.5%(FS)+ 5dgt |
| Had Beban Tekanan | 10000 Kpa (10 Mpa; 100 bar;) |
| Vacuum Test Type | Relative vacuum |
| Vacuum Test Units | Kpa; Mpa; bar; inHg; PSI |
| Julat Ujian Vakum | -101 Kpa ~ 0 Kpa |
| Resolusi Ujian Vakum | 1 Kpa |
| Temperature Test Units | °C (Celsius), °F (Fahrenheit) |
| Julat Ujian Suhu | -40°C ~ 150°C (-40°F ~ 302°F) |
| Resolusi Ujian Suhu | 0.1°C (-40°C ~ 99.9°C), 1°C (100°C ~ 150°C), 0.1°F (-40°F ~ 99.9°F), 1°F (100°F ~ 302°F) |
| Ketepatan Ujian Suhu | +/- 0.5°C + 2dgt, +/- 0.9°F + 2dgt |
Figure 7: Detailed technical parameters of the AUTOOL LM 120.
7. Waranti dan Sokongan
AUTOOL stands behind the quality of its products:
- Waranti Tiga Tahun: For damage caused by non-human factors, AUTOOL promises to resend parts for free within 3 years.
- Lifelong Maintenance: The product is supported with lifelong maintenance.
- Sokongan Pelanggan: For any inquiries or support needs, AUTOOL offers 24/7 customer support. You can contact them for assistance with product operation, troubleshooting, or warranty claims.
Figure 8: AUTOOL's commitment to customer support and warranty.
