Powell 450W Carpet Cleaner User Manual

Arahan Keselamatan Penting

Sila baca semua arahan dengan teliti sebelum menggunakan perkakas. Simpan manual ini untuk rujukan masa hadapan.

• Sentiasa pastikan bekalan kuasa sepadan dengan volumtage dinyatakan pada label penilaian.
• Jangan rendam perkakas, kord, atau palam ke dalam air atau cecair lain.
• Cabut plag dari saluran keluar apabila tidak digunakan dan sebelum membersihkan.
• Jauhkan perkakas daripada kanak-kanak dan haiwan peliharaan.
• Use only cleaning solutions recommended for carpet cleaners. Do not use flammable or abrasive liquids.
• Jangan kendalikan perkakas dengan kord atau palam yang rosak.
• Avoid cleaning electrical outlets or other electrical components.
• Jangan menyekat bukaan pengudaraan.

Produk Selesaiview

The Powell 450W Carpet Cleaner is designed for effective cleaning of various textile surfaces, including carpets, rugs, sofas, mattresses, and car upholstery. Its powerful motor and dual-tank system ensure thorough cleaning and easy disposal of dirty water.

Image: The Powell 450W Carpet Cleaner, showcasing its compact design and included accessories like the brush head and nozzle.

Komponen

Image: Detailed diagram illustrating the various components of the carpet cleaner, including tanks, hose, and controls.

• Tangki Air Bersih: Holds fresh water and cleaning solution.
• Tangki Air Kotor: Collects extracted dirty water.
• hos: Flexible hose for directing the cleaning nozzle.
• Cleaning Nozzle/Brush Head: For spraying solution, scrubbing, and suction.
• Butang Semburan Air: Mengaktifkan fungsi semburan.
• Butang Hidup/Mati: Menghidupkan dan mematikan unit.
• Kord Kuasa: Menyambungkan unit ke soket elektrik.

Persediaan

1. Bongkar: Keluarkan semua komponen dari pembungkusan dengan berhati-hati.
2. Assemble Hose and Nozzle: Connect the flexible hose to the main unit and attach the desired cleaning nozzle (e.g., brush head) securely.
3. Isi Tangki Air Bersih: Remove the clean water tank. Fill it with warm tap water (max 40°C) and the recommended amount of carpet cleaning solution. Do not overfill. Securely reattach the tank to the unit.
   

   Image: Diagram illustrating the 1800ml clean water tank capacity and 1100ml waste water tank capacity.

4. Tangki Air Kotor Kosong: Ensure the dirty water tank is empty and properly seated before starting.
5. Position Power Cord: Unwind the power cord and ensure it is not tangled or obstructing your work area.

Arahan Operasi

Bersedia untuk Pembersihan

• Pre-vacuum: For best results, thoroughly vacuum the area to be cleaned to remove loose dirt and debris.
• Test Spot: Always test the cleaning solution on an inconspicuous area of the carpet or upholstery for colorfastness before full application.

Prosedur Pembersihan

1. Hidupkan kuasa: Plug the power cord into a suitable electrical outlet. Press the On/Off button to turn on the cleaner.
2. Larutan Semburan: Hold the cleaning nozzle over the area to be cleaned. Press the water spray button to release the cleaning solution onto the surface.
3. Scrub (Optional): For stubborn stains, gently scrub the area with the brush head while spraying.
4. Ekstrak Air Kotor: Release the spray button and slowly pull the nozzle over the wet area, applying downward pressure to extract the dirty water. Repeat this step until no more dirty water is being extracted.
5. Ulang: Continue cleaning in small sections, overlapping slightly, until the entire area is clean.
6. Tangki Pemantau: Periodically check the clean water tank and refill as needed. Empty the dirty water tank when it reaches the MAX fill line or when cleaning is complete.
7. Matikan: Once cleaning is finished, press the On/Off button to turn off the cleaner and unplug it from the outlet.

Image: The carpet cleaner being used to clean car upholstery, demonstrating its ease of use.

Image: Visual representation of the cleaner's effectiveness against dirt, unpleasant scents, and various stains.

Petua untuk Keputusan Terbaik

• Move the nozzle slowly over the surface to allow sufficient time for the solution to penetrate and for the suction to extract the dirty water.
• Do not over-wet the carpet or upholstery. Excessive moisture can lead to longer drying times and potential damage.
• For heavily soiled areas, a second pass or pre-treatment may be necessary.

Penyelenggaraan

Selepas Setiap Penggunaan

1. Kosongkan dan Bilas Tangki: Remove both the clean and dirty water tanks. Empty any remaining clean solution and dispose of the dirty water. Rinse both tanks thoroughly with clean water.
2. Clean Nozzle/Brush Head: Detach the cleaning nozzle/brush head and rinse it under running water to remove any debris or residue.
3. Lap Bahagian Luar: Lap bahagian luar unit utama dengan iklanamp kain. Jangan gunakan bahan kimia yang keras.
4. Kering Udara: Biarkan semua komponen kering sepenuhnya sebelum memasang semula atau menyimpannya.

Penyimpanan

Store the carpet cleaner in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the power cord and hose are neatly wrapped to prevent damage.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

This product comes with a manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or contact POWELL customer support.

If you encounter any issues or require assistance, please contact the retailer or the manufacturer's customer service department. Have your model number and purchase date ready when contacting support.