Maklumat Keselamatan Penting
Please read and understand all instructions before installing or operating this water heater. Failure to follow these instructions may result in property damage, personal injury, or death.
- This appliance must be installed by a qualified plumber or electrician in accordance with all local codes and regulations.
- Ensure the power supply matches the specifications of the unit (120V, 1440W).
- Do not operate the water heater if it is not filled with water.
- Install a temperature and pressure relief (T&P) valve as specified in the installation instructions.
- Jangan menyekat atau tamper with the T&P valve.
- Maintain proper clearances around the unit for ventilation and service.
- Putuskan sambungan kuasa sebelum melakukan sebarang penyelenggaraan atau servis.
Produk Selesaiview
The Ranein WarmCube 2.5 Gallon Electric Mini Tank Water Heater is designed to provide instant hot water at the point of use, reducing wait times and conserving energy. Its compact design allows for versatile installation in various settings.
Ciri-ciri Utama
- 2.5 Gallon Capacity: Stores heated water for immediate use.
- 1440W Heating Element: Provides rapid heating for on-demand hot water.
- Tangki Keluli Tahan Karat Tahan Lama: Resists corrosion for extended product life.
- Triple-Layer Insulation: Features enamel coating, high-density insulation foam, and a reinforced decarburized steel plate for superior heat preservation and reduced energy loss.
- Termostat Boleh Laras: Allows precise temperature control up to 85°C (185°F).
- Keselamatan yang Dipertingkatkan: Includes high-temperature resistance, high-pressure resistance (up to 1.0 MPa), dry-burn protection, IPX4 waterproof rating, and advanced leakage prevention.
- Pemasangan Serbaguna: Can be installed under-sink, on a wall, or floor-mounted.
Komponen Unit
The water heater includes the main unit, a temperature and pressure relief (T&P) valve, mounting brackets, and screws.
Imej: Depan view of the Ranein WarmCube 2.5 Gallon Electric Mini Tank Water Heater, showing the control knob and inlet/outlet connections.
Spesifikasi
Detailed technical specifications for the Ranein WarmCube 2.5 Gallon Electric Mini Tank Water Heater.
| Spesifikasi | Nilai |
|---|---|
| Jenama | Ranein |
| Nombor Model | RC25G-W |
| Kapasiti | 2.5 gelen |
| Voltage | 120 Volt |
| Wattage | 1440 Watt |
| Suhu Maksimum | 85°C (185°F) |
| Tekanan Operasi Maksimum | 100 PSI (1.0 MPa) |
| Penilaian Kalis Air | IPX4 |
| Dimensi Produk (W x H x D) | 13.39" x 13.39" x 11.42" |
| Berat Barang | 17.63 paun |
| Jenis Pemasangan | Floor, Wall |
Image: Visual representation of the water heater's dimensions and key specifications, including capacity, voltage, kuasa, tekanan air maksimum, berat, amppadam, dan gred kalis air.
Pemasangan
Sebelum Pemasangan
- Verify that the installation location is suitable for the unit's size and weight when full.
- Ensure access to a standard 120V electrical outlet.
- Confirm that water supply lines are accessible and can be connected to the unit.
- Turn off the main water supply and electrical power to the installation area.
Pilihan Pemasangan
The Ranein WarmCube 2.5 can be installed in several configurations:
- Under-Sink: Ideal for kitchens and bathrooms where space is limited.
- Dilekap di dinding: Use the provided mounting brackets and screws to secure the unit to a sturdy wall surface.
- Dipasang di Lantai: Letakkan unit pada permukaan yang stabil dan rata.
Image: Depicts the water heater installed under a sink and wall-mounted in a bathroom vanity, illustrating versatile placement options.
Sambungan Paip
- Install the provided Temperature and Pressure (T&P) relief valve into the designated port on the top of the water heater. Ensure a watertight seal using appropriate sealant (e.g., PTFE tape).
- Connect the cold water inlet (blue port) to your cold water supply line.
- Connect the hot water outlet (red port) to your hot water faucet or fixture.
- Open the hot water faucet at the fixture to allow air to escape from the tank as it fills with water.
- Once water flows steadily from the hot water faucet, close the faucet. Check all connections for leaks.
Video: Demonstrates the installation of the pressure relief valve onto the Ranein mini tank water heater, showing the proper threading and tightening process.
Sambungan elektrik
- Plug the water heater's power cord into a grounded 120V electrical outlet.
- Ensure the outlet is dedicated and properly rated for the appliance's wattage (1440W).
Operasi
Permulaan Awal
- After plumbing and electrical connections are complete and checked, turn on the electrical power to the unit.
- The heating indicator light will illuminate, indicating that the water heater is actively heating the water.
- Allow sufficient time for the water to reach the desired temperature.
Pelarasan Suhu
- The water heater features a front-mounted rotary knob for temperature adjustment.
- Rotate the knob clockwise to increase the temperature and counter-clockwise to decrease it.
- The temperature range is typically between 55°F (13°C) and 145°F (63°C). Adjust to a comfortable and safe level.
- For energy efficiency, consider setting the temperature to the lowest comfortable setting.
Image: Illustrates the temperature adjustment knob on the water heater, with examples of suitable temperatures for various uses like washing dishes, vegetables, brushing teeth, and washing face.
Penyelenggaraan
Regular maintenance ensures optimal performance and extends the lifespan of your water heater.
Penyelenggaraan Rutin
- Pemeriksaan Tahunan: Have a qualified professional inspect the unit annually for any signs of wear, corrosion, or leaks.
- T&P Valve Test: Test the T&P relief valve at least once a year by lifting the lever. Ensure water flows freely and then reseats properly. If it does not, replace the valve.
- Pembersihan Luaran: Bersihkan bahagian luar unit dengan lembut, damp kain. Jangan gunakan pembersih yang kasar.
Mengeringkan Tangki
If the unit will be unused for an extended period or if there is a risk of freezing, drain the tank:
- Turn off the electrical power to the water heater.
- Turn off the cold water supply to the unit.
- Open a hot water faucet at a nearby fixture to relieve pressure.
- Carefully open the drain valve (if equipped) or disconnect the cold water inlet to allow the tank to drain.
- Once drained, leave the faucet open and the cold water inlet disconnected until ready to refill.
Menyelesaikan masalah
Rujuk jadual di bawah untuk isu biasa dan kemungkinan penyelesaiannya.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada air panas | No power; Thermostat set too low; Heating element failure | Check power supply/breaker; Adjust thermostat; Contact customer support |
| Air tidak cukup panas | Thermostat set too low; High hot water demand; Cold water mixing | Increase thermostat setting; Allow time for recovery; Check for cross-connection |
| Air terlalu panas | Set termostat terlalu tinggi | Decrease thermostat setting |
| Leaking from T&P valve | Excessive pressure; Faulty valve | Check water pressure; Replace T&P valve |
| Unit membuat bising | Pengumpulan sedimen dalam tangki | Drain and flush the tank (refer to maintenance section) |
Waranti dan Sokongan
Ranein products are manufactured to high-quality standards and are backed by a limited warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Ranein customer support through the retailer where the product was purchased or visit the official Ranein webtapak untuk maklumat hubungan.
