M5Stack Cardputer v1.1

Kadputer Rasmi M5Stack dengan M5stampManual Pengguna Kit Pembangunan S3 v1.1

Brand: M5Stack | Model: Cardputer v1.1

1. Pengenalan

This manual provides essential information for the M5Stack Official Cardputer with M5stampS3 v1.1 Development Kit. It covers product features, setup instructions, operational guidelines, maintenance tips, and technical specifications to ensure proper use and functionality.

M5Stack Cardputer v1.1 Development Kit

Image 1.1: The M5Stack Cardputer v1.1 Development Kit, a compact, card-sized computer with a full QWERTY keyboard and integrated M5stampS3 microcontroller.

2. Kandungan dan Persediaan Pakej

2.1. Apa yang ada di dalam Kotak

  • Cardputer v1.1 x 1
  • L-shaped hex wrench 1.5mm (for M2 screws) x 1
M5Stack Cardputer and hex wrench

Image 2.1: The Cardputer v1.1 and the included hex wrench for potential assembly or maintenance.

2.2. Kuasa Hidup dan Konfigurasi Awal

  1. Sambungan Kuasa: Connect the Cardputer to a power source using the USB-C port. The device includes a 1400mAh battery.
  2. Sisipan Kad SD: For optimal use, insert a Micro SD card (32GB or less recommended) into the designated slot.
  3. Perisian tegar: The device comes with pre-installed firmware. To explore additional functionalities or custom applications, consider installing the M5 Launcher or M5Stack Burner. Refer to the official M5Stack website for detailed instructions and available firmware.

3. Perkakasan Terlaluview

The Cardputer v1.1 integrates several components into a compact form factor.

Labeled diagram of M5Stack Cardputer v1.1 features

Image 3.1: Key external features of the Cardputer v1.1, including the 1.14" IPS-LCD, 56-key keyboard, microphone, speaker, and M5stampmodul S3.

3.1. Komponen Utama

  • Pengawal mikro: M5stampS3 (ESP32-S3)
  • paparan: 1.14-inch IPS-LCD (ST7789V2, 240x135 pixels)
  • Input: 56-key QWERTY keyboard, PDM-MIC@SPM1423 (microphone)
  • Output: I2S-Speaker@NS4168 (1W speaker)
  • Ketersambungan: Wi-Fi, Bluetooth, Grove port (G5V G2 G1), Micro SD card slot, USB-C
  • Kuasa: Internal 120mAh battery, additional 1400mAh battery in the backpack module.
  • Lain-lain: IR G44 (infrared), Magnet, Button RST (reset), Button GO.
Dalaman view of M5Stack Cardputer v1.1 board with labeled components

Imej 3.2: Satu dalaman view of the Cardputer's main board, highlighting the M5stampS3, IPS-LCD, and various connection points.

3.2. Dimensi Fizikal

The device measures approximately 84mm (3.3in) in length, 54mm (2.1in) in width, and 19.7mm (0.77in) in thickness, with a weight of approximately 90.0 grams.

M5Stack Cardputer v1.1 with dimensions labeled

Image 3.3: Physical dimensions of the M5Stack Cardputer v1.1.

4. Operating the Cardputer

4.1. Keyboard and Screen Interaction

The Cardputer features a 56-key QWERTY keyboard for text input and command execution. The 1.14-inch IPS-LCD provides visual feedback and interface navigation.

Close-up of M5Stack Cardputer v1.1 screen and keyboard

Imej 4.1: Perincian view of the Cardputer's screen and keyboard, showing key layout and display clarity.

4.2. Basic Functions and Applications

The Cardputer is designed for various development and learning applications. Depending on the loaded firmware, it can perform tasks such as:

  • Wi-Fi scanning and network analysis
  • Fungsi pemasa
  • System hardware tests (e.g., display, microphone, speaker, gyroscope)
  • Infrared remote control capabilities
  • Komunikasi Bluetooth Tenaga Rendah (BLE).
  • Embedded system development and learning
  • Industrial control and automation
  • Home control systems
  • Wireless communication and IoT projects
M5Stack Cardputer v1.1 screen displaying various functions

Image 4.2: The Cardputer's screen interface, showing options for Wi-Fi scan, record, chat, and other functions.

4.3. Pelabuhan Ketersambungan

The device offers multiple connectivity options for expansion and interaction:

  • Pelabuhan Grove: For connecting M5Stack's ecosystem of modules and sensors.
  • Slot Kad Mikro SD: Untuk storan luaran.
  • Port USB-C: For power, data transfer, and programming.
sebelah view of M5Stack Cardputer v1.1 with Grove port

Imej 4.3: Sisi view showing the Grove port for external module connections.

sebelah view of M5Stack Cardputer v1.1 with Micro SD card slot

Imej 4.4: Sisi view showing the Micro SD card slot for expandable storage.

5. Spesifikasi

CiriPerincian
SoCESP32-S3@Xtensa LX7 Wi-Fi, USB-OTG function
kilatDenyar 16MB
PSRAM8MB PSRAM
Wi-Fi802.11 b/g/n (2.4 GHz Wi-Fi)
SentuhFT6336U@capacitive touch, touch area pixels 320 x 280 (Note: Product description states 1.14" IPS-LCD 240x135, this touch spec might be for a different model or general capability)
Skrin LCD1.14"@240 x 135 ILI9342C, SPI communication
Cip Pengurusan KuasaAXP2101
RTCBM8563
Pengeluar CPUEspressif
Bilangan Pemproses2
RAMLPDDR4
Sistem OperasiLinux (Note: This is a general capability, specific firmware may vary)
Berat Barang3.52 auns
Dimensi Pakej5.63 x 3.58 x 0.91 inci
Bateri1 Bateri Bukan Standard (termasuk)

6. Penyelenggaraan

6.1. Penjagaan Bateri

The Cardputer contains an internal 120mAh battery and an additional 1400mAh battery in the backpack module. To prolong battery life:

  • Elakkan suhu yang melampau.
  • Charge the device regularly, but avoid overcharging or completely draining the battery for extended periods.
  • Gunakan kabel USB-C yang disediakan untuk pengecasan.
Meletup view of M5Stack Cardputer v1.1 showing internal battery

Imej 6.1: Satu meletup view illustrating the internal battery component of the Cardputer.

6.2. Pembersihan

Gunakan kain lembut dan kering untuk membersihkan peranti. Elakkan menggunakan bahan kimia yang keras atau bahan kasar yang boleh merosakkan skrin atauasing.

7. Penyelesaian masalah

If you encounter issues with your Cardputer, consider the following general troubleshooting steps:

  • Isu Kuasa: Pastikan peranti dicas sepenuhnya atau disambungkan kepada sumber kuasa yang stabil.
  • Peranti Tidak Responsif: Try pressing the Reset button (BtnRst) or power cycling the device using the ON/OFF switch.
  • Firmware Related: If a specific function is not working, it might be related to the installed firmware. Check the M5Stack official documentation for firmware updates or alternative firmware options.
  • Ketersambungan: Verify all physical connections (USB-C, Grove, SD card) are secure.

For more detailed troubleshooting guides and community support, visit the official M5Stack webtapak: m5stack.com. Navigate to the 'DOCUMENT' section and search for your product model to find tutorials and resources.

8. Waranti dan Sokongan

The M5Stack Cardputer v1.1 Development Kit is covered by the manufacturer's standard warranty. For specific warranty terms, technical support, or service inquiries, please refer to the official M5Stack website or contact their customer service directly. Additional protection plans may be available from your retailer.

Dokumen Berkaitan - Cardputer v1.1

Praview M5Stack Cardputer V1.1: Panduan Komputer Mudah Alih dan Platform Pembangunan
Panduan komprehensif untuk M5Stack Cardputer v1.1, sebuah komputer mudah alih berprestasi tinggi untuk jurutera dan pembangun. Ciri-ciri StampPengawal S3A, papan kekunci 56 kekunci, skrin TFT 1.14 inci, mikrofon MEMS dan sambungan yang meluas. Termasuk arahan persediaan, Soalan Lazim, spesifikasi dan butiran platform pembangunan.
Praview M5STACK Cardputer: Komputer Pembangunan ESP32-S3 Mudah Alih
Terokai M5STACK Cardputer, komputer pembangunan yang padat dan serba boleh yang menampilkan cip ESP32-S3FN8, papan kekunci 56 kekunci, skrin TFT dan sambungan yang meluas untuk prototaip pantas dan projek terbenam.
Praview Panduan Pengguna M5Stack Cardputer V1.1 dan Perisian Tegar Berkelip
Panduan komprehensif untuk M5Stack Cardputer V1.1, meliputi flash firmware kilang, menyelesaikan masalah biasa seperti skrin hitam dan pemasangan pemacu USB menggunakan M5Burner. Ketahui cara menyediakan, memasang pemacu, memilih port dan membakar perisian tegar untuk peranti anda.
Praview M5STACK Dinmeter: Product Overview dan Panduan Mula Pantas
Comprehensive guide to the M5STACK Dinmeter, an embedded development board powered by M5StampS3. Features include a 1.14-inch screen, rotary encoder, and extensive connectivity. Learn about its specifications and how to perform WiFi and BLE scans with Arduino IDE.
Praview M5STACK STAMPLembaran Data S3 dan Spesifikasi Teknikal
Terokai M5STACK STAMPPapan pembangunan S3, menampilkan cip ESP32-S3 dengan Wi-Fi dan Bluetooth 5 (LE). Lembaran data ini memperincikan komposisi perkakasannya, perihalan pin, keupayaan berfungsi dan ciri elektrik untuk projek IoT.
Praview Papan Pembangunan M5Stack AtomS3-Lite ESP32-S3
Terokai M5Stack AtomS3-Lite, papan pembangunan ESP32-S3 padat yang menampilkan Wi-Fi, antena bersepadu dan antara muka serba boleh untuk projek IoT dan mikropengawal. Ketahui tentang spesifikasi, ciri dan pilihan pembangunannya dengan Arduino IDE dan UiFlow2.