LUTEC B0F2MQ3BMM

LUTEC 80W Dusk to Dawn Flood Light Instruction Manual

Model: B0F2MQ3BMM

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your LUTEC 80W Dusk to Dawn Flood Light. This outdoor security light features 9000 lumens of 5000K daylight illumination, a built-in photocell for automatic dusk-to-dawn operation, and four adjustable heads for broad coverage. Designed for hardwired installation, it is IP65 waterproof for reliable outdoor performance.

Two LUTEC 80W Dusk to Dawn Flood Lights, black, with four adjustable LED heads each.

Image 1.1: LUTEC 80W Dusk to Dawn Flood Lights (2-pack)

2. Maklumat Keselamatan

Sila baca dan fahami semua arahan sebelum memulakan pemasangan. Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran atau bahaya lain yang boleh menyebabkan kerosakan harta benda atau kecederaan diri.

  • Putuskan Kuasa: Always turn off power at the circuit breaker or fuse box before installing, servicing, or cleaning the fixture.
  • Juruelektrik Berkelayakan: Jika anda tidak pasti tentang proses pemasangan, sila rujuk juruelektrik yang berkelayakan.
  • Pembumian: Ensure the fixture is properly grounded to avoid potential electrical hazards.
  • Pendawaian: Semua sambungan pendawaian mesti dibuat mengikut kod dan ordinan elektrik tempatan.
  • Fixture Integrity: Do not alter the fixture in any way. Any modifications may void the warranty and create safety risks.
  • Suhu Operasi: Do not operate the fixture in temperatures outside its specified range.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

Diagram showing product dimensions and included accessories: 2 screws, 3 wire nuts, 1 mounting bracket, 1 rubber plug, 1 gasket, 1 M4*50 screw, 1 M4*35 screw.

Image 3.1: Product Dimensions and Included Accessories

  • LUTEC 80W Flood Light (2 units)
  • Pendakap Pemasangan (1)
  • Kacang Wayar (3)
  • Skru (2)
  • Palam Getah (1)
  • Gasket (1)
  • M4*50 Skru (1)
  • M4*35 Skru (1)

4. Spesifikasi

CiriSpesifikasi
JenamaLITEC
ModelB0F2MQ3BMM
Wattage80W
Kecerahan9000 Lumen
Suhu Warna5000K Siang
Jenis Sumber CahayaLED
Bilangan Kepala Cahaya4
Sudut PencahayaanMax. 300° (adjustable)
Kawasan LiputanSehingga 2,370 kaki persegi.
Sumber KuasaElektrik Berwayar (Berwayar Keras)
Jenis SuisDusk to Dawn (Photocell)
Tahan AirIP65 Kalis Air
bahanaluminium
Dimensi Produk13.98"L x 9.25"W x 6.89"H
Berat Barang4.62 paun
Perhimpunan Diperlukanya

5. Persediaan dan Pemasangan

This flood light requires hardwired installation. A junction box is required but not included. Ensure power is disconnected at the circuit breaker before proceeding.

Diagram showing three steps for hardwired installation of the flood light. Step 1: Attach mounting bracket to junction box. Step 2: Connect live, neutral, and earth wires. Step 3: Secure the light fixture to the mounting bracket.

Image 5.1: Hardwired Installation Steps

  1. Sediakan Pendawaian: Turn off power at the main circuit breaker. Ensure the power is off before touching any wires.
  2. Mounting Bracket Installation (Step 1): Secure the provided mounting bracket to your existing outdoor junction box. The mounting base diameter is approximately 4.37 inches. Use the included screws to firmly attach the bracket.
  3. Wire Connections (Step 2): Connect the electrical wires from the fixture to your household wiring using the provided wire nuts.
    • Sambungkan Live Wire (usually black) from the fixture to the Live Wire from the junction box.
    • Sambungkan Kawat Neutral (usually white) from the fixture to the Neutral Wire from the junction box.
    • Sambungkan Kawat Bumi (usually green or bare copper) from the fixture to the Earth Wire from the junction box.
    Pastikan semua sambungan selamat.
  4. Fixture Attachment (Step 3): Carefully align the flood light fixture with the mounting bracket and secure it in place. Use the appropriate screws to fasten the fixture to the bracket. Ensure the gasket is properly seated to maintain the IP65 waterproof rating.
  5. Seal and Test: Once the fixture is securely mounted, apply the rubber plug if necessary to seal any openings. Restore power at the circuit breaker and test the light.

6. Arahan Operasi

6.1. Dusk to Dawn Functionality

The LUTEC flood light is equipped with a built-in photocell sensor for automatic dusk-to-dawn operation. This feature eliminates the need for manual switching.

Illustration showing the flood light automatically turning off at dawn and turning on at dusk, demonstrating the dusk to dawn mode.

Image 6.1: Dusk to Dawn Mode Operation

  • At Dusk: As ambient light levels decrease, the photocell sensor detects the onset of darkness, and the flood light will automatically turn on to full brightness.
  • Throughout the Night: The light will remain illuminated at full brightness until daylight.
  • At Dawn: As ambient light levels increase, the photocell sensor detects the return of daylight, and the flood light will automatically turn off.

Ensure the photocell sensor is not obstructed by objects, dirt, or debris, as this can interfere with its proper operation.

6.2. Adjusting Light Heads

The flood light features four flexible light heads that can be adjusted independently to direct illumination where needed. This allows for a customizable coverage area with a maximum illumination angle of 300°.

Diagram illustrating the maximum light range of 2370 sq. ft. with a beam angle of 210-300 degrees, showing light covering a wide area in front of a house.

Image 6.2: Max Light Range and Adjustable Beam Angle

  • Gently grasp each light head and pivot it to the desired angle.
  • Avoid excessive force when adjusting to prevent damage to the fixture.

7. Penyelenggaraan

Penyelenggaraan berkala memastikan prestasi optimum dan jangka hayat lampu limpah anda.

  • Pembersihan: Bersihkan lekapan secara berkala dengan lembut, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components. Ensure power is off before cleaning.
  • Penderia Sel Foto: Keep the photocell sensor free from dirt, dust, and obstructions (e.g., leaves, spiderwebs) to ensure accurate dusk-to-dawn operation.
  • Pemeriksaan: Annually inspect the wiring and mounting for any signs of wear, damage, or loosening. Tighten any loose screws or connections.
  • Meterai Kalis Air: The fixture has an IP65 waterproof rating. Ensure the gasket and seals remain intact and undamaged to prevent water ingress.
Image showing the flood light operating in rain, with icons for gasket, weather-resistant, frost-resistant, and wind-resistant, highlighting its IP65 waterproof feature.

Image 7.1: IP65 Waterproof Design for All-Weather Durability

8. Penyelesaian masalah

Jika anda menghadapi masalah dengan lampu limpah anda, rujuk masalah dan penyelesaian biasa berikut:

MasalahKemungkinan PuncaPenyelesaian
Lampu tidak menyala pada waktu senja.Tidak ada kekuatan untuk perlawanan.
Photocell obstructed or dirty.
Sambungan pendawaian yang rosak.
Periksa pemutus litar.
Clean photocell sensor. Ensure no objects block it.
Sahkan semua sambungan wayar selamat (dengan kuasa dimatikan).
Cahaya kekal menyala pada siang hari.Photocell obstructed or dirty.
Light from another source (e.g., street light) hitting the photocell.
Clean photocell sensor. Ensure no objects block it.
Relocate the fixture or shield the photocell from external light sources.
Cahaya berkelip atau malap.Sambungan pendawaian longgar.
Voltage turun naik.
Check and secure all wiring connections (with power off).
Rujuk juruelektrik jika voltagisu-isu e disyaki.
One or more light heads not working.Kegagalan komponen dalaman.Hubungi sokongan pelanggan untuk mendapatkan bantuan.

If the problem persists after attempting these solutions, please contact LUTEC customer support.

9. Waranti dan Sokongan

LUTEC provides high-quality after-sales service for its products. If you encounter any issues or have questions regarding your 80W Dusk to Dawn Flood Light, please do not hesitate to contact us.

Perkhidmatan Pelanggan: We offer 7*24 hour after-sales support. For assistance, please refer to the contact information provided with your purchase or visit the official LUTEC webtapak.

Dokumen Berkaitan - B0F2MQ3BMM

Praview Manual Pemasangan dan Pengendalian Lampu Banjir Lokasi Basah LUTEC 7621101053
Manual ini menyediakan arahan untuk pemasangan, pengendalian dan penyelenggaraan Lampu Banjir Lokasi Basah LUTEC 7621101053. Ia merangkumi langkah berjaga-jaga keselamatan, tetapan mod dan penyelesaian masalah.
Praview LUTEC 6988804012 Solar Wall Lantern: Owner's Manual & Installation Guide
Comprehensive owner's manual and installation guide for the LUTEC 6988804012 Solar Wall Lantern. Learn about package contents, safety, installation, operation modes, battery replacement, maintenance, and troubleshooting.
Praview Manual Pemilik Lampu Sorot LED LUTEC P6221B/P6221W dan Panduan Pemasangan
Manual pemilik yang komprehensif untuk Lampu Sorot LED LUTEC P6221B dan P6221W. Termasuk amaran keselamatan, langkah pemasangan, penyelesaian masalah dan maklumat waranti terhad 3 tahun.
Praview LUTEC #7632801053/7632801012 Wet Location Motion Sensor Light Installation and Operation Manual
This manual provides comprehensive instructions for the LUTEC #7632801053/7632801012 outdoor wet location motion sensor light, covering installation, operation modes, safety warnings, and service information.
Praview Manual Pemilik Lampu Sorot LED LUTEC | Model 7632815012/7632815053
Manual pemilik komprehensif untuk Lampu Sorot LED LUTEC, model 7632815012 dan 7632815053. Termasuk maklumat keselamatan, penyediaan, arahan pemasangan, arahan pengendalian, penjagaan dan penyelenggaraan, penyelesaian masalah dan butiran jaminan.
Praview Manual Pemilik Lampu Sorot LED LUTEC
Manual pemilik untuk Lampu Sorot LED LUTEC, Model #7632814012/7632814053. Termasuk maklumat keselamatan, kandungan pakej, kandungan perkakasan, arahan pemasangan, penjagaan dan penyelenggaraan, penyelesaian masalah dan maklumat waranti.