1. Pengenalan
Thank you for choosing the VEVOR Wireless Bed Alarm System. This system is designed to assist caregivers in monitoring individuals, particularly elderly adults, to prevent falls by alerting when a person leaves their bed. The system utilizes a pressure-sensitive bed pad and a wireless pager for timely notifications.
Sila ambil perhatian:
- The term "Wireless" refers to the signal transmission between the bed sensor pad's transmitter and the pager. The bed sensor pad itself is connected to its transmitter via a cable.
- This device is intended as an aid for fall prevention and does not replace direct supervision.
2. Maklumat Keselamatan
Read all instructions before use. Failure to follow safety guidelines may result in injury or improper operation.
- Jauhkan peranti daripada air dan kelembapan berlebihan.
- Jangan cuba membuka atau membaiki peranti sendiri. Rujuk semua servis kepada kakitangan yang berkelayakan.
- Pastikan bateri dimasukkan dengan betul mengikut tanda kekutuban.
- Replace batteries promptly when the low battery indicator activates.
- Keep small parts and batteries out of reach of children and pets.
- Position the bed sensor pad smoothly and without creases to ensure accurate pressure detection.
3. Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej:
- 1 x Bed Sensor Pad (14 x 30 inches)
- 1 x Wireless Pager
- 1 x Manual Pengguna (dokumen ini)
- 8 x Expansion Tubes
- 8 x Skru
Image 3.1: Main components of the VEVOR Wireless Bed Alarm System, including the bed sensor pad and pager.
4. Produk Lebihview
The VEVOR Wireless Bed Alarm System consists of two primary units:
- Bed Sensor Pad: A 14 x 30-inch pressure-sensitive pad designed to be placed under the bed sheet. It detects when a person's weight is removed from the pad.
- Wireless Pager: A portable receiver that receives signals from the bed sensor pad's transmitter and alerts the caregiver through adjustable sound, vibration, or silent modes.
Imej 4.1: Selesaiview of the bed sensor pad dimensions and included items.
5. Persediaan
Follow these steps to set up your VEVOR Wireless Bed Alarm System:
5.1. Pasang Bateri
The system requires batteries for both the sensor pad's transmitter and the pager. Batteries are not included and must be purchased separately.
- For the Sensor Pad Transmitter: Insert one 9V / 6LR61 battery.
- For the Pager: Insert three C / LR14 batteries.
Ensure correct polarity when inserting batteries. The pager and transmitter feature a low battery reminder to indicate when replacement is needed.
Image 5.1: Battery requirements for the system components.
5.2. Position the Bed Sensor Pad
- Place the 14 x 30-inch bed sensor pad directly on the mattress, underneath the fitted bed sheet.
- Ensure the pad is positioned in the area where the individual's torso or hips will rest, allowing for optimal pressure detection when they are in bed.
- Make sure the pad lies flat without any wrinkles or folds, as this can affect its sensitivity.
- Route the pad's cable to the side of the bed where the transmitter will be located, ensuring it does not interfere with the individual's movement or become a tripping hazard.
Image 5.2: Proper placement of the bed sensor pad under the fitted sheet.
6. Arahan Operasi
Setelah sistem dipasang, ikuti arahan operasi berikut:
6.1. Power On and Test
- Ensure both the sensor pad's transmitter and the pager have fresh batteries.
- Place the pager within the transmission range (up to 300 ft / 91.44 m, with up to 131 ft / 40 m through walls).
- Have the individual lie down on the bed, ensuring they are positioned over the sensor pad.
- Wait a few moments for the system to register the presence.
- Have the individual carefully get off the bed. The pager should activate with an alarm, vibration, or silent alert depending on its settings.
- If the pager does not activate, check battery levels and ensure the pad is correctly positioned and connected.
Image 6.1: The system detects when a person leaves the bed and transmits a wireless signal to the pager.
6.2. Pager Settings
The pager offers customizable alert modes:
- Kelantangan Boleh Laras: Use the volume controls on the pager to set the desired alert sound level.
- Mod senyap: Activate silent mode for discreet monitoring.
- Mod Getaran: Use vibration mode for tactile alerts, useful in noisy environments or for personal preference.
6.3. Alarm Shutoff
To silence the pager alarm, locate the slide switch on the side of the pager. Move the switch to the 'OFF' position to stop the alarm. You can then reset it to 'ALARM' or 'CHIME' as needed.
Image 6.2: The pager's slide switch for alarm control.
6.4. Transmission Range
The system provides a stable wireless signal with a transmission distance of up to 300 ft (91.44 m) in open areas. It can penetrate walls up to 131 ft (40 m), allowing caregivers to monitor from various locations within a home or facility.
Image 6.3: Illustration of the system's wireless transmission range.
7. Penyelenggaraan
7.1. Cleaning the Sensor Pad
The bed sensor pad is made of waterproof PVC material, making it easy to clean.
- Lap permukaan pad denganamp cloth and mild disinfectant.
- Do not submerge the pad in water or use harsh chemical cleaners.
- Ensure the pad is completely dry before placing it back under the bed sheet.
Image 7.1: Cleaning the waterproof PVC bed sensor pad.
7.2. Penggantian Bateri
When the low battery reminder activates on either the pager or the sensor pad transmitter, replace the batteries immediately to ensure continuous operation.
- Refer to Section 5.1 for the correct battery types for each component.
- Buang bateri terpakai secara bertanggungjawab mengikut peraturan tempatan.
8. Penyelesaian masalah
If you encounter issues with your VEVOR Wireless Bed Alarm System, refer to the following table:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pager does not alarm when person leaves bed. | Low or dead batteries in pager or transmitter. Pager out of range. Sensor pad improperly placed or faulty. | Gantikan bateri di kedua-dua unit. Move pager closer to the bed sensor pad. Ensure pad is flat and under the person's torso/hips. Check cable connection. |
| Penggera palsu. | Pad not flat, creased, or object on pad. Incorrect sensitivity setting (if applicable). | Ensure pad is smooth and clear of other items. Reposition the pad. |
| Low battery indicator on. | Bateri hampir habis. | Replace batteries in the indicated unit (pager or transmitter). |
| Isyarat lemah atau terputus-putus. | Pager too far from transmitter or excessive obstructions. | Move pager closer to the bed sensor pad. Reduce physical barriers between units if possible. |
9. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | 760IFT6 |
| Bed Pad Dimensions | 14 x 30 inci (355.6 x 762 mm) |
| Ketebalan Pad | 0.2 inci (5.08 mm) |
| Bahan Utama | PVC |
| warna | Hitam |
| Berat Barang | 0.97 paun (0.44 kg) |
| Teknologi Sensor | Penderia Tekanan |
| Jenis Pemasangan | Under the Bed Sheet |
| Sumber Kuasa | Dikuasakan Bateri |
| Bateri Pemancar | 1 x 9V / 6LR61 (Not Included) |
| Pager Battery | 3 x C / LR14 (Not Included) |
| Julat Penghantaran Tanpa Wayar | Up to 300 ft (91.44 m) open area; up to 131 ft (40 m) through walls |
| UPC | 197988125556 |
10. Waranti dan Sokongan
For warranty information or technical support, please refer to the VEVOR official website or contact VEVOR customer service directly. Keep your purchase receipt for warranty claims.
Untuk bantuan lanjut, layari: www.vevor.com
