1. Pengenalan
The Testboy Testavit Schuki 6 is a versatile socket tester designed for quick and safe verification of socket wiring and for tripping 30 mA FI/RCD circuit breakers at 230 V AC. Its simple operation and clear 2.0-inch LCD display make it an essential tool for electricians, tradespeople, and anyone needing to ensure electrical installation safety. The robust construction ensures durability for regular use.
This manual provides detailed instructions for the safe and effective use of your Testboy Testavit Schuki 6. Please read it thoroughly before operation.
2. Arahan Keselamatan
- Sentiasa pastikan peranti berada dalam keadaan baik sebelum digunakan. Jangan gunakan jika rosak.
- This device is intended for testing standard electrical sockets. Do not use it for purposes other than those specified.
- Observe all local and national safety regulations for electrical work.
- Do not touch the metal contacts of the plug during operation.
- The RCD test function will trip the circuit breaker. Ensure all connected devices can withstand a power interruption.
- If you are unsure about any aspect of electrical testing, consult a qualified electrician.
- Pastikan peranti kering dan bersih. Jangan dedahkannya kepada suhu atau kelembapan yang melampau.
3. Produk Lebihview
The Testboy Testavit Schuki 6 is a compact and robust device designed for ease of use and clear result display.
Rajah 1: Depan view of the Testboy Testavit Schuki 6 Socket Tester.
Figure 2: The Testboy Testavit Schuki 6, showcasing reka bentuknya yang padat.
3.1. Komponen Peranti
Figure 3: Key components of the Testavit Schuki 6.
- Paparan LCD: Pertunjukan voltage, leakage current, and wiring status.
- Power/Hold Button: Turns the device on/off and holds the current reading.
- Butang Ujian RCD: Initiates the Residual Current Device (RCD) test.
4. Persediaan
The Testboy Testavit Schuki 6 is ready for use immediately after inserting the batteries. It requires 2x 1.5V AAA batteries (included).
4.1. Pemasangan Bateri
- Cari penutup petak bateri di bahagian belakang peranti.
- Open the cover and insert two 1.5V AAA batteries, observing the correct polarity (+/-).
- Tutup penutup petak bateri dengan selamat.
The device will automatically power on when plugged into a live socket, or can be manually powered on using the Power/Hold button.
5. Operasi
5.1. Socket Wiring Check
- Plug the Testboy Testavit Schuki 6 into the socket you wish to test.
- The LCD display will immediately show the voltage and the wiring status.
- Refer to the wiring interpretation table (Figure 4) to understand the displayed status.
Figure 4: Wiring Interpretation Table.
Interpretation of Display:
- L / N / E - CORRECT: All wiring is correct (Live, Neutral, Earth).
- E - OPEN: Earth wire is open or missing.
- N - OPEN: Neutral wire is open or missing.
- ---: Live wire is open or missing.
- L / E - REVERSE: Live and Earth wires are reversed.
- L / N - REVERSE: Live and Neutral wires are reversed.
Figure 5: LCD display showing a 'CORRECT' wiring status.
5.2. RCD (FI) Test Function
The RCD test function checks the functionality of Residual Current Devices (FI/RCD circuit breakers) by simulating a fault current.
- Plug the Testboy Testavit Schuki 6 into the socket protected by the RCD you wish to test.
- Ensure no critical equipment is connected to the circuit, as the RCD test will trip the circuit breaker.
- Tekan ke Butang Ujian RCD (3).
- The RCD should trip within the specified time (10-1000 ms).
- If the RCD does not trip, it indicates a potential fault with the RCD or the electrical installation. Consult a qualified electrician immediately.
- After the test, reset the RCD at your electrical panel.
6. Spesifikasi Teknikal
Figure 6: Visual representation of Testavit Schuki 6 and its specifications.
| Parameter | Nilai |
|---|---|
| Nombor Model | 61610000 |
| Voltage Julat | 30 ~ 260 V / 45 ~ 65 Hz (Tolerance: ± (2.0 %+2)) |
| Leakage Voltage (N-PE) | 0 ~ 99 V / 45 ~ 65 Hz (Tolerance: ± (2.0 %+2)) |
| Masa Perjalanan | 10 – 1000 ms (Tolerance: ± (2.0 %+4)) |
| Suhu Operasi | 0°C ~ 40°C |
| Kelembapan Operasi | 20 % ~ 75 % RH |
| Suhu Penyimpanan | -10°C ~ 50°C |
| Kelembapan Penyimpanan | 20 % ~ 80 % RH |
| Ketinggian | ≤ 2000m |
| Ujian RCD | >30mA (at 230 V AC) |
| Bekalan Kuasa | Bateri AAA 2x 1.5V |
| Dimensi Produk (L x W x H) | 6.6 x 6.5 x 7.5 cm |
| Berat badan | 210 gram |
| Spesifikasi yang Mematuhi | TÜV/GS, IEC/EN |
| Negara Asal | China |
7. Penyelenggaraan
7.1. Pembersihan
Clean the device with a dry, soft cloth. Do not use abrasive cleaners or solvents. Ensure no moisture enters the device.
7.2. Penggantian Bateri
When the battery indicator on the LCD shows low power, replace the batteries promptly to ensure accurate readings. Follow the battery installation steps in Section 4.1.
7.3. Penyimpanan
Simpan peranti di tempat yang sejuk dan kering, jauh dari cahaya matahari langsung dan suhu yang melampau. Jika menyimpan untuk tempoh yang lama, keluarkan bateri untuk mengelakkan kebocoran.
8. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Device does not power on when plugged in. | No power in the socket, or dead batteries. | Check the socket with another device. Replace batteries. |
| Incorrect wiring indication (e.g., E-OPEN). | Actual wiring fault in the socket. | Consult a qualified electrician to inspect and repair the wiring. Do not use the socket until repaired. |
| RCD test does not trip the circuit breaker. | Faulty RCD or issue with the electrical circuit. | Do not rely on this RCD for protection. Have a qualified electrician inspect the RCD and circuit immediately. |
| Paparan LCD malap atau berkelip-kelip. | Kuasa bateri rendah. | Ganti bateri AAA. |
9. Waranti dan Sokongan
Testboy products are known for their robustness and longevity. For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Testboy webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.
