1. Pengenalan
This manual provides essential information for the safe installation, operation, and maintenance of your Anern 1500W Hybrid Solar Inverter. This device integrates the functions of a solar inverter, MPPT solar charger, and battery charger to provide uninterrupted power support. It is designed for both on-grid and off-grid applications, supporting various battery types including lithium, lead-acid, and gel batteries.
Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
2. Arahan Keselamatan
Adherence to these safety guidelines is crucial to prevent injury and damage to the inverter or connected equipment.
- Pemasangan mesti dilakukan oleh kakitangan yang berkelayakan.
- Ensure all wiring is correctly polarized and securely connected.
- Do not disassemble the inverter; refer servicing to authorized personnel.
- Avoid exposing the inverter to rain, snow, or liquids.
- Ensure adequate ventilation around the inverter to prevent overheating.
- Always disconnect power before performing any maintenance or wiring.
- Use appropriate circuit breakers and fuses as specified in the electrical diagrams.
3. Produk Lebihview
The Anern 1500W Hybrid Solar Inverter is a multi-functional device designed for efficient power management in solar energy systems. It features a pure sine wave output, ensuring compatibility with sensitive electronics.
Rajah 3.1: Depan view of the Anern 1500W Hybrid Solar Inverter, showing the LCD display and control buttons.
Gambar 3.2: Lebihview of the Anern 1500W Hybrid Solar Inverter highlighting nominal power, input voltage, dan bateri voltage.
Figure 3.3: Detailed product overview illustrating the various components and their functions.
Ciri-ciri Utama:
- Output Gelombang Sinus Tulen: Provides high-quality AC power suitable for all types of loads, including sensitive electronics.
- Integrated MPPT Charge Controller: Built-in 40A MPPT solar charge controller maximizes solar power harvesting.
- Mod Pengecasan Berbilang: Supports "Only Solar", "Mains First", "Solar First", and "Mains & Solar hybrid" charging modes.
- Flexible Output Modes: Offers "Solar First" and "SBU Priority" output modes for diverse application requirements.
- Keserasian Bateri: Compatible with 24V lithium, lead-acid, and gel batteries.
- Paparan LCD: Provides dynamic display of system data and operating status, with configurable settings.
- Battery-Independent Operation: Capable of operating without a battery in certain configurations.
4. Spesifikasi Teknikal
Below are the key technical specifications for the Anern 1500W Hybrid Solar Inverter (Model: Anern_1500W_24V).
| Ciri | Spesifikasi |
|---|---|
| Model | Anern_1500W_24V |
| Kuasa Nominal | 1500W |
| Kapasiti Lonjakan | 2000W |
| Keluaran Voltage | 230VAC |
| Kekerapan Output | 50/60Hz (Auto penderiaan) |
| Bateri Voltage | 24VDC |
| Maks. Kuasa Input PV | 1100W |
| PV Voltage Julat | 20-150VDC |
| Max. PV Input VOC | 150VDC |
| Bermula Voltage | >30VDC |
| Pengawal Caj MPPT | 40A |
| Recommended PV Cable Size | 12AWG |
| Max. Charge Current (AC + Solar) | 40A |
| Kecekapan | Sehingga 98% |
| Penilaian Perlindungan | IP21 |
5. Pemasangan
Proper installation is critical for the safe and efficient operation of your hybrid solar inverter. Ensure all local electrical codes and regulations are followed.
5.1 Pemilihan Tapak
- Install the inverter indoors, away from direct sunlight, heat sources, and moisture.
- Pastikan permukaan pelekap cukup kuat untuk menyokong berat penyongsang.
- Allow at least 20 cm (8 inches) of clearance around the inverter for proper airflow.
- Avoid areas with flammable materials or corrosive gases.
5.2 Gambarajah Pendawaian
The following diagram illustrates a typical system connection for the hybrid solar inverter, including solar panels, batteries, and AC loads.
Figure 5.1: System diagram showing connections for solar panels, generator/utility, external battery packs, and household appliances.
- Sambungan Bateri: Connect the battery bank to the inverter's battery terminals. Ensure correct polarity.
- Sambungan Tatasusunan PV: Connect the solar panel array to the PV input terminals. Observe voltage dan had semasa.
- Sambungan Input AC: Connect the AC utility grid or generator to the AC input terminals.
- Sambungan Output AC: Connect your household loads to the AC output terminals.
- Pembumian: Pastikan inverter dibumikan dengan betul mengikut kod elektrik tempatan.
6. Mod Pengendalian dan Tetapan
The inverter offers various configurable settings via its LCD display and control buttons. These settings allow you to optimize the system's performance based on your specific needs.
6.1 Mod Pengecasan
- Hanya Suria: Mengutamakan kuasa solar untuk pengecasan bateri.
- Hidangan Utama Dahulu: Prioritizes utility grid power for battery charging, using solar only when grid is unavailable.
- Solar First: Prioritizes solar power for battery charging, supplementing with grid power if solar is insufficient.
- Bekalan Utama & Hibrid Solar: Utilizes both mains and solar power for charging, optimizing based on availability and load.
6.2 Mod Output
- Solar First: Prioritizes solar power to supply loads, then battery, then utility grid.
- SBU Priority: Prioritizes Solar, then Battery, then Utility grid for supplying loads.
6.3 Paparan dan Kawalan LCD
The LCD display provides real-time system data, including input/output voltage, battery status, and load levels. Use the function buttons to navigate menus and configure settings such as battery charging current, AC/solar charger priority, and load supply priority.
Figure 6.1: Close-up of the LCD display showing system status and indicators.
7. Penyelenggaraan
Penyelenggaraan berkala memastikan jangka hayat dan prestasi optimum inverter anda.
- Pembersihan: Keep the inverter's exterior clean and free of dust. Use a dry cloth. Do not use liquid cleaners.
- Pengudaraan: Pastikan bukaan pengudaraan bersih dan tidak terhalang.
- Sambungan: Periksa secara berkala semua sambungan elektrik untuk kesesakan dan tanda-tanda kakisan.
- Pemeriksaan Bateri: Jika menggunakan bateri asid plumbum, periksa paras elektrolit dan keadaan terminal mengikut garis panduan pengeluar bateri.
- Pemeriksaan Alam Sekitar: Pastikan persekitaran operasi kekal dalam julat suhu dan kelembapan yang ditetapkan.
8. Penyelesaian masalah
This section provides solutions to common issues you might encounter. For problems not listed here, contact technical support.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Penyongsang tidak dihidupkan | Tiada sambungan bateri; Bateri voltagterlalu rendah; Suis kuasa dimatikan. | Semak sambungan bateri dan voltage; Ensure power switch is on. |
| Tiada output AC | Overload; Short circuit; Inverter fault; Battery low. | Reduce load; Check for short circuits; Check battery voltage; Restart inverter. |
| Pengecasan solar tidak berfungsi | Input PV voltage too low/high; PV array disconnected; MPPT controller fault. | Check PV connections and voltage; Ensure sufficient sunlight; Consult manual for error codes. |
| Bunyi yang tidak normal | Loose components; Fan obstruction; Internal fault. | Inspect for loose parts; Clear fan obstructions; If persistent, contact support. |
9. Waranti dan Sokongan
Anern provides a standard warranty for this product. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, service, or warranty claims, please contact Anern customer service through their official channels or visit their webtapak.
Pengeluar: Anern
Tarikh Mula-mula Tersedia: 3 Mac 2025
Anda boleh mendapatkan lebih banyak maklumat dan sokongan pada Anern Store on Amazon.