Manual Pengguna Multimeter Digital Pintar PeakTech P1072 True RMS

pengenalan

The PeakTech P1072 is a compact, smart True RMS digital multimeter designed for accurate electrical measurements. It features automatic function recognition (Auto-Scan) and auto-ranging, simplifying operation for various tasks. This device is suitable for students, technicians, and DIY enthusiasts, offering a wide range of measurement functions including voltage, resistance, continuity, diode test, and temperature.

Maklumat Keselamatan

Always observe standard safety precautions when using electrical testing equipment. This multimeter is rated for CAT III 600 V, indicating its suitability for measurements in building installations. Ensure the device and test leads are in good condition before use. Do not attempt to measure voltages exceeding the specified limits.

• Jangan gunakan peranti jika ia kelihatan rosak.
• Ensure correct connection of test leads for each measurement.
• Avoid contact with live circuits.
• Gantikan bateri dengan segera apabila penunjuk bateri lemah muncul.

Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• PeakTech P1072 Digital Multimeter
• Petunjuk Ujian (Merah dan Hitam)
• Penderia Suhu
• Bateri AAA (2x)
• Manual Arahan

Image: The PeakTech P1072 multimeter shown with its included test leads, temperature sensor, and two AAA batteries.

Produk Selesaiview

Familiarize yourself with the components of your PeakTech P1072 multimeter:

Image: A detailed diagram highlighting the LCD display, function buttons, input jacks, NCV sensor, and LED light on the PeakTech P1072 multimeter.

• Paparan LCD: 4000 count display with blue backlight for clear readings. Changes to red for NCV or Live Test detection.
• O/FUNC Button: Power On/Off and function selection in certain modes.
• HOLD/* Button: Freezes the current reading on the display. Also activates the backlight/LED flashlight.
• Bicu Input:
  • COM (Lazim): For black test lead.
  • VΩHzLIVE: For red test lead for voltage, resistance, frequency, Live Test, diode, continuity, and temperature measurements.
• Penderia NCV: Located at the top for non-contact voltagpengesanan e.
• Lampu LED: Integrated flashlight on the back for illuminating dark work areas.
• Kickstand: Foldable stand on the back for hands-free operation.

Persediaan

1. Pemasangan Bateri

The multimeter requires two AAA batteries. To install or replace them:

1. Pastikan multimeter dimatikan dan petunjuk ujian diputuskan.
2. Cari petak bateri di bahagian belakang peranti.
3. Open the battery cover using a screwdriver if necessary.
4. Masukkan dua bateri AAA, perhatikan polariti yang betul (+/-).
5. Tutup penutup bateri dengan selamat.

2. Menghubungkan Petunjuk Ujian

Connect the test leads as follows for most measurements:

• Masukkan petunjuk ujian hitam ke dalam COM jek.
• Masukkan petunjuk ujian merah ke dalam VΩHzLIVE jek.

Arahan Operasi

Hidupkan/Mati Kuasa

Tekan ke O/FUNC button to turn the multimeter on. Press and hold the O/FUNC button for approximately 5 seconds to turn it off.

Auto-Scan and Auto-Range Function

The P1072 features an intelligent AUTO-SCAN function. When powered on, the device automatically detects the type of measurement (AC/DC voltage, resistance, continuity) based on the connected circuit. The AUTO-RANGE function automatically selects the appropriate measurement range for optimal accuracy.

Image: The PeakTech P1072 multimeter in use, demonstrating its ability to measure voltage, resistance, frequency, capacitance, diode, and temperature.

Fungsi Pengukuran

• Voltage Measurement (ACV/DCV):

  Connect the test leads to the circuit in parallel. The multimeter will automatically detect AC or DC voltage. Max input: 600V AC/DC.
• Pengukuran Rintangan (Ω):

  Ensure the circuit is de-energized. Connect the test leads across the component to measure resistance.

• Ujian Kesinambungan ()))):

  For checking circuit continuity. If resistance is below a certain threshold, an audible beep will sound.

• Ujian Diod (→|):

  Sambungkan wayar ujian merentasi diod. Paparan akan menunjukkan volum hadapantage penurunan.
• Temperature Measurement (°C):

  Connect the included temperature sensor to the VΩHzLIVE and COM jacks. The display will show the temperature reading.

• Pengukuran Kapasitans (F):

  Ensure the capacitor is discharged before testing. Connect the test leads across the capacitor terminals.

• Pengukuran Kekerapan (Hz):

  Connect the test leads to the signal source. The multimeter will display the frequency.
• NCV (Voltage) Pengesanan:

  Hold the top part of the multimeter near a live AC voltage source. The display backlight will turn red, and an audible alarm will sound if voltage dikesan.

• Ujian LANGSUNG:

  Insert the red test lead into the VΩHzLIVE jack and touch the probe to a live conductor. The display backlight will turn red, indicating a live phase. The black lead is not used for this test.

HOLD Function and Backlight/LED

Tekan ke HOLD/* button briefly to freeze the current reading on the display. Press it again to release. Press and hold the HOLD/* button to activate the display backlight and the integrated LED flashlight. Press and hold again to turn them off.

Penyelenggaraan

Penggantian Bateri

When the low battery indicator appears on the display, replace the batteries as described in the "Setup" section to ensure accurate measurements.

Pembersihan

Lap peranti dengan iklanamp kain dan detergen yang lembut. Jangan gunakan bahan kasar atau pelarut. Pastikan peranti kering sepenuhnya sebelum digunakan.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

The PeakTech P1072 Digital Multimeter comes with a Waranti pengilang selama 3 tahun. For technical support, service, or warranty claims, please contact your retailer or PeakTech customer service. Refer to the official PeakTech webtapak untuk maklumat hubungan dan sumber lanjut.

Untuk maklumat lanjut, lawati PeakTech Brand Store.