Manual Arahan Pembersih Kolam Robotik WYBOT Osprey 300II

Arahan Keselamatan

Read this manual carefully before operating the WYBOT Osprey 300II Robotic Pool Cleaner. Failure to follow instructions may result in damage or injury.

Keselamatan Am

• Pastikan port pengecasan kering sebelum menyambungkan pengecas.
• Jangan kendalikan pembersih jika kord kuasa atau pengecas rosak.
• Jauhkan kanak-kanak dan haiwan peliharaan dari kawasan kolam renang semasa pembersih beroperasi.
• Do not operate the cleaner if there are swimmers in the pool.
• Hanya gunakan pengecas asal yang disediakan oleh WYBOT.

Keselamatan Bateri

• The cleaner contains a Lithium-Ion battery. Do not expose it to extreme temperatures or direct sunlight.
• Do not attempt to disassemble or repair the battery pack.
• Buang bateri mengikut peraturan tempatan.

Kandungan Pakej

Sahkan bahawa semua item disertakan dalam pakej:

• 1 x Badan Bersih
• 1 x Pengecas
• 1 x Manual Pengguna
• 1 x Brush (pre-installed or optional)
• 1 x Pemegang Terapung
• 1 x Swing Plate
• 1 x Panduan Pantas

Image: Contents of the WYBOT Osprey 300II package, including the cleaner, charger, manuals, brush, floating handle, and swing plate.

Produk Selesaiview

The WYBOT Osprey 300II is a cordless robotic pool cleaner designed for efficient and autonomous pool maintenance.

Ciri-ciri Utama:

• Dilanjutkan Waktu Operasi: Up to 130 minutes with a 6600mAh battery.
• Kuasa Motor yang Kuat: 45W brushless motor for effective debris removal.
• Pengecasan Cepat: Mengecas penuh dalam masa lebih kurang 3 jam.
• Aplikasi Serbaguna: Suitable for various pool types (above-ground, in-ground) and surfaces (PVC, tiles, vinyl, gunite), including slopes up to 15 degrees.
• Auto-Parking Technology: Automatically returns to the pool edge when battery is low.
• Sistem Penapisan Lanjutan: Captures fine debris like sand, leaves, and pet hair.

Image: The WYBOT Osprey 300II Robotic Pool Cleaner, showcasing its sleek design and wheels.

Persediaan

1. Mengecas Pembersih

1. Ensure the cleaner is dry before charging.
2. Locate the charging port on the top of the cleaner.
3. Sambungkan kabel pengecas ke port dan pasangkan pengecas ke soket kuasa.
4. The LED indicator on the charger will show red during charging and turn green when fully charged (approximately 3 hours).

Image: A person connecting the charger to the WYBOT Osprey 300II pool cleaner near a pool.

2. Attaching the Floating Handle (Optional)

The floating handle can be attached to the cleaner to assist with retrieval from the pool.

1. Tie the floating handle securely to the designated attachment point on the cleaner.
2. Adjust the length of the rope to ensure the handle floats on the surface of the water when the cleaner is at the deepest part of the pool.

3. Brush Installation (Optional)

The cleaner comes with brushes that can be installed on the bottom for enhanced cleaning performance, especially on rougher surfaces. For pools with uneven bottoms, it is recommended to test without brushes first to avoid obstruction.

1. Turn the cleaner upside down.
2. Align the brushes with the designated slots on the bottom of the cleaner.
3. Press firmly until the brushes snap into place.

Arahan Operasi

1. Meletakkan Pembersih di Kolam Renang

1. Ensure the cleaner is fully charged and the charging port is securely closed.
2. Long press the power button on the cleaner to turn it on.
3. Gently lower the cleaner into the pool until it is fully submerged. Hold it underwater until all air bubbles escape.
4. Release the cleaner and allow it to sink to the bottom. Ensure it lands in an upright position.

Video: Demonstration of placing the WYBOT Osprey 300II pool cleaner into the water and its initial operation.

2. Mod Pembersihan

The Osprey 300II operates automatically once activated. It features intelligent path planning to maximize cleaning coverage.

3. Auto-Parking Function

When the battery level is low, the cleaner will automatically move to the nearest pool edge for easy retrieval. The LED indicator will signal low battery status.

Image: The WYBOT Osprey 300II pool cleaner automatically returning to the edge of the pool, indicated by a 'P' symbol and a battery icon.

Penyelenggaraan

1. Cleaning the Filter Basket

1. After each cleaning cycle, retrieve the cleaner from the pool.
2. Open the top cover of the cleaner to access the filter basket.
3. Remove the filter basket and empty any collected debris.
4. Rinse the filter basket thoroughly with a garden hose until clean.
5. Reinsert the clean filter basket and close the top cover securely.

Image: A person cleaning the filter basket of the WYBOT Osprey 300II with a garden hose, showing collected debris.

2. Penjagaan Am

• Simpan pembersih di tempat yang sejuk dan kering, jauh dari cahaya matahari langsung apabila tidak digunakan.
• Ensure the charging port is dry before storage.
• Regularly inspect the wheels and brushes for wear and tear.

Menyelesaikan masalah

If you encounter issues with your WYBOT Osprey 300II, refer to the following common solutions:

• Pembersih tidak bergerak: Ensure the battery is fully charged and the power button is pressed. Check for any obstructions in the wheels or suction inlet.
• Prestasi pembersihan yang lemah: Clean the filter basket. Ensure brushes are properly installed if needed for your pool surface.
• Cleaner gets stuck: If your pool has uneven surfaces or obstacles, consider removing the brushes or manually guiding the cleaner initially.
• Penunjuk LED tidak berfungsi: Contact customer support if the LED indicator does not function as described after charging or during operation.

Spesifikasi

Waranti dan Sokongan

For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the official WYBOT webtapak.