1. Amaran Keselamatan Penting
Please read this user manual carefully before operating the desk. Failure to follow these instructions may result in injury or damage to the product.
- Keep fingers and other objects clear of the lifting columns to prevent injury during height adjustments.
- Jangan melebihi kapasiti beban maksimum 160 kg (352 lbs). Ensure the weight is evenly distributed.
- Pastikan meja diletakkan di atas permukaan yang stabil dan rata untuk mengelakkannya daripada terbalik.
- Jauhkan kanak-kanak dan haiwan peliharaan dari meja semasa operasi.
- Do not disassemble or modify the desk's components. Contact support for assistance.
2. Persediaan dan Pemasangan
The FLEXISPOT EC5 PRO+DT desk is designed for straightforward assembly. All necessary tools and step-by-step instructions are included in the package.
2.1 Membongkar
Carefully unpack all components and verify against the parts list provided in the separate assembly guide. Ensure no parts are missing or damaged.
2.2 Langkah Perhimpunan
- Attach the lifting columns to the desk frame using the provided screws.
- Pasangkan kaki ke bahagian bawah tiang pengangkat.
- Carefully place the tabletop onto the assembled frame. The tabletop features pre-drilled holes for easy alignment.
- Fasten the tabletop to the frame using the designated screws.
- Connect all motor and control panel cables according to the assembly diagram. Ensure all connections are secure.
- It is recommended to have two people for assembly, especially when handling the heavy tabletop and frame, to ensure safety and ease of installation.
3. Arahan Operasi
The FLEXISPOT EC5 PRO+DT desk features a powerful dual-motor system for smooth and quiet height adjustments.
3.1 Fungsi Panel Kawalan
The control panel allows for precise height adjustments and includes memory presets for convenience.
- Anak panah Atas/Bawah (▲ / ▼): Press and hold to adjust the desk height continuously. Release to stop.
- Height Display: Menunjukkan ketinggian meja semasa dalam sentimeter.
- Pratetap Memori (1, 2, 3): Press 'M' then a number (1, 2, or 3) to save the current height. To recall a saved height, simply press the corresponding number button.
- Timed Reminder (A): Activates a reminder to change posture after a set period. Refer to the full assembly guide for setting specific intervals.
3.2 Height Adjustment Range
The desk can be adjusted from a minimum height of 62 sm to a maximum height of 127 sm (without tabletop). The dual motors provide a smooth soft-start and soft-stop motion, with an adjustment speed of up to 35mm/s and a low operating noise level of less than 50 dB.
4. Penyelenggaraan
Proper maintenance ensures the longevity and optimal performance of your FLEXISPOT desk.
4.1 Pembersihan
- The tabletop features a scratch-resistant and easy-to-maintain surface. For general cleaning, wipe with a soft, damp kain.
- For stubborn marks, use a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive materials that could damage the finish.
- Pastikan tiada cecair meresap ke dalam panel kawalan atau komponen motor.
4.2 Penjagaan Am
- Periksa semua skru dan sambungan secara berkala untuk memastikan ia kekal ketat.
- Avoid placing excessively heavy or sharp objects on the desk that could scratch or dent the surface.
- Do not drag the desk across the floor; lift it when moving to prevent damage to the feet or floor.
5. Penyelesaian masalah
If you encounter issues with your FLEXISPOT desk, refer to the following common troubleshooting steps:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Meja tidak bergerak | Power cable disconnected; Control panel cable loose; Overload; Motor error. | Check power connection. Ensure all cables are securely plugged in. Reduce weight on desk. Unplug for 10 seconds, then plug back in to reset. |
| Meja bergerak tidak sekata | Uneven weight distribution; Obstruction. | Distribute weight evenly. Check for any obstructions under or around the desk. |
| Kod ralat pada paparan | Ralat sistem tertentu. | Refer to the detailed troubleshooting section in the full assembly manual for specific error code interpretations and solutions. Often, a power cycle (unplug and replug) can resolve minor errors. |
Jika masalah berterusan selepas mencuba penyelesaian ini, sila hubungi khidmat pelanggan FLEXISPOT untuk bantuan lanjut.
6. Spesifikasi
Detailed technical specifications for the FLEXISPOT EC5 PRO+DT Height Adjustable Desk:
- Jenama: FLEXISPOT
- Nombor Model: EC5 PRO+DT
- Desk Dimensions (L x W x H): 160 cm x 80 cm x 62-127 cm (adjustable height)
- Bahan Meja: Wood (FSC-certified MDF with scratch-resistant high-pressure laminate)
- Bahan Bingkai: logam
- warna: White Top + White Frame
- Jenis Motor: Motor Dwi
- Kapasiti Muatan: 160 kg (352 lbs)
- Height Adjustment Speed: 35mm/s (maks)
- Tahap Bunyi: < 50 dB
- ciri-ciri: Memory Presets, Timed Reminder, Soft Start/Stop
7. Maklumat Waranti
Specific warranty terms and conditions for the FLEXISPOT EC5 PRO+DT desk may vary by region and retailer. Please consult your purchase documentation or contact the retailer from whom you purchased the product for detailed warranty information.
Typically, warranties cover manufacturing defects and functional issues under normal use. Damage resulting from misuse, unauthorized modifications, or exceeding load capacity may not be covered.
8. Sokongan
For technical assistance, spare parts, or any questions not covered in this manual, please contact FLEXISPOT customer support or your authorized retailer.
When contacting support, please have your product model number (EC5 PRO+DT) and proof of purchase readily available.
