Manual Arahan Kipas Bekas PC JONSBO ZA-120B

1. Pengenalan

Terima kasih kerana membeliasing the JONSBO ZA-120B PC Case Fan. This fan is designed to provide efficient cooling for your computer system while offering customizable ARGB lighting effects. Featuring a 28mm thick design, 4-sides infinity mirror, and PWM control, it ensures both aesthetic appeal and optimal performance. This manual provides detailed instructions for installation, operation, and maintenance to help you get the most out of your product.

2. Maklumat Keselamatan

Sila baca dan patuhi garis panduan keselamatan ini untuk mengelakkan kerosakan pada produk atau kecederaan pada diri anda:

• Always disconnect power from your computer before installing or handling any internal components.
• Handle the fan by its frame to avoid touching the blades, which could cause damage or injury.
• Pastikan pembumian yang betul untuk mengelakkan kerosakan nyahcas elektrostatik (ESD) pada komponen sensitif.
• Do not attempt to modify the fan or its cables. Unauthorized modifications may void your warranty and pose safety risks.
• Keep the fan away from liquids and excessive moisture.
• Simpan kipas di tempat yang sejuk dan kering apabila tidak digunakan.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej anda:

• JONSBO ZA-120B PC Case Fan
• Skru Pemasangan
• Manual Pengguna (dokumen ini)

4. Produk Lebihview

The JONSBO ZA-120B is a high-performance PC case fan designed for optimal airflow and stunning visual effects. Key features include:

• 4-Sides Infinity Mirror: Creates a deep, multi-layered lighting illusion from all angles.
• Kawalan PWM: Allows for precise fan speed adjustment (700-2400 RPM) to balance cooling performance and noise levels.
• Addressable RGB (ARGB) Sync: Compatible with motherboard ARGB software (3-pin 5V header) for synchronized lighting effects across your system.
• Simplified Cables: Integrated male and female PWM and ARGB headers for easy daisy-chaining and cable management.
• Aluminum Nameplate: Features a durable aluminum CD pattern nameplate for a premium finish.
• 28mm Thick Design: Enhanced thickness for improved airflow and static pressure.

5. Persediaan dan Pemasangan

Follow these steps to properly install your JONSBO ZA-120B PC Case Fan:

1. Sediakan Sistem Anda:
   • Turn off your computer and disconnect it from the power outlet.
   • Buka casing komputer anda untuk mengakses lokasi pemasangan kipas.
2. Pasang Kipas:
   • Position the fan in your desired mounting location (e.g., front, top, rear, bottom of the case). Ensure the airflow direction is correct for your cooling setup (typically intake for front/bottom, exhaust for rear/top).
   • Secure the fan to the case using the provided mounting screws. Tighten them evenly to prevent vibration.
3. Connect Power (PWM):
   • Locate an available 4-pin fan header on your motherboard (labeled 'CPU_FAN', 'SYS_FAN', 'CHA_FAN', etc.).
   • Connect the fan's 4-pin PWM cable to the motherboard header. If installing multiple fans, you can daisy-chain them using the integrated male and female PWM heads, then connect the last fan in the chain to a single motherboard header.
4. Sambungkan Pencahayaan ARGB:
   • Locate an available 3-pin 5V ARGB header on your motherboard (often labeled 'ARGB_HEADER', 'D_LED', 'VDG', etc.). Do not connect to a 4-pin 12V RGB header, as this will damage the LEDs.
   • Connect the fan's 3-pin ARGB cable to the motherboard header. Similar to PWM, you can daisy-chain multiple fans using the integrated male and female ARGB heads, connecting the last fan to a single motherboard ARGB header.
   • If your motherboard does not have a 3-pin 5V ARGB header, you may need an external ARGB controller (not included) to control the lighting effects.
5. Pengurusan Kabel:
   • Route all cables neatly to ensure proper airflow and a clean build. Use cable ties if necessary.
6. Tutup Sarung dan Hidupkan:
   • Tutup bekas komputer anda dan sambungkan semula kuasa.
   • Power on your computer and verify that the fan is spinning and the ARGB lighting is functioning.

6. Operasi

Once installed, the JONSBO ZA-120B fan operates automatically based on your system's settings. Here's how to manage its functions:

• Fan Speed Control (PWM):
  • The fan speed is controlled via the 4-pin PWM connection to your motherboard.
  • You can adjust fan curves and speeds through your motherboard's BIOS/UEFI settings or dedicated software provided by your motherboard manufacturer (e.g., ASUS AI Suite, Gigabyte SIV, MSI Dragon Center).
  • This allows you to optimize for quiet operation at low loads and increased cooling performance under heavy loads.
• Kawalan Pencahayaan ARGB:
  • The ARGB lighting effects are controlled via the 3-pin 5V ARGB connection to your motherboard.
  • Use your motherboard's ARGB synchronization software (e.g., ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome Sync) to customize colors, patterns, and synchronize lighting with other ARGB components.
  • If using an external ARGB controller, refer to the controller's manual for lighting adjustment instructions.

7. Penyelenggaraan

Penyelenggaraan berkala membantu memastikan prestasi optimum dan jangka hayat kipas anda:

• Pembersihan:
  • Periodically (every 3-6 months, depending on environment) clean dust from the fan blades and frame.
  • Use compressed air to blow away dust. Hold the fan blades gently to prevent them from spinning rapidly during cleaning, which can damage the bearings.
  • For stubborn dust, use a soft, dry cloth or a cotton swab.
• Pemeriksaan:
  • Check cables for any signs of wear, fraying, or loose connections.
  • Ensure mounting screws are still tight.

8. Penyelesaian masalah

If you encounter issues with your JONSBO ZA-120B fan, refer to the following common problems and solutions:

• Kipas Tidak Berpusing:
  • Ensure the 4-pin PWM cable is securely connected to a functional motherboard fan header.
  • Check your motherboard's BIOS/UEFI settings to ensure the fan header is enabled and configured correctly (e.g., not set to 0 RPM).
  • Test the fan on a different fan header or with a known working fan to rule out a faulty header or fan.
• ARGB Lighting Not Working or Incorrect Colors:
  • Verify the 3-pin ARGB cable is correctly connected to a 3-pin 5V ARGB header on your motherboard. Ensure it is not connected to a 4-pin 12V RGB header.
  • Check your motherboard's ARGB software to ensure lighting is enabled and configured.
  • If daisy-chaining, ensure all connections are secure and the total number of LEDs does not exceed your motherboard/controller's capacity. (Note: This fan has 68+ LEDs, which may exceed some basic controllers).
  • Try updating your motherboard's BIOS and ARGB software to the latest versions.
• Bunyi Berlebihan:
  • Ensure the fan is securely mounted and screws are tightened evenly to prevent vibration.
  • Bersihkan sebarang pengumpulan habuk pada bilah kipas.
  • Adjust the fan speed curve in your motherboard's BIOS/UEFI or software to reduce RPMs at lower temperatures.
  • Pastikan tiada kabel yang menghalang bilah kipas.

9. Spesifikasi

10. Waranti dan Sokongan

JONSBO products are manufactured to high-quality standards. For warranty information and technical support, please refer to the official JONSBO webtapak atau hubungi peruncit tempatan anda. Simpan bukti pembelian anda untuk tuntutan waranti.

Untuk bantuan lanjut, sila layari JONSBO Store on Amazon or contact JONSBO customer service.