1. Pengenalan
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Beninca Bull 424 FC Sliding Gate Opener. This chain-driven automation system is designed for residential sliding gates, supporting gates up to 800 lbs and 20 feet in length. Please read this manual thoroughly before proceeding with installation or operation.
Imej 1.1: Selesaiview of the Beninca Bull 424 FC Sliding Gate Opener kit, showing the main motor unit, control panel, two remote controls, and a set of safety photocells.
2. Maklumat Keselamatan
WARNING: Improper installation or use can cause serious injury or death. Always follow all safety instructions.
- Pastikan semua sambungan elektrik dilakukan oleh juruelektrik yang berkelayakan dan mematuhi kod elektrik tempatan.
- Pastikan tangan, kaki dan pakaian jauh daripada pintu pagar dan mekanisme pembuka semasa operasi.
- Jangan benarkan kanak-kanak bermain atau mengendalikan alat kawalan pembuka pintu pagar.
- Periksa pintu pagar dan pembuka secara berkala untuk tanda-tanda haus, kerosakan atau ketidaksejajaran.
- The photocell safety devices must be installed and maintained correctly to prevent entrapment.
- Putuskan sambungan kuasa sebelum melakukan sebarang penyelenggaraan atau pembaikan.
3. Kandungan Pakej
Sahkan bahawa semua komponen yang disenaraikan di bawah terdapat dalam pakej anda:
- Beninca Bull 424 FC motor base
- Control panel with built-in receiver
- 20 ft chain for sliding gates
- Two (2) TO.GO 2A garage opener remote controls
- Beninca PUPILLA.T true beam photocell set
- Installation hardware (bolts, screws, etc. - specific items may vary)
4. Persediaan dan Pemasangan
This section outlines the general steps for installing the Beninca Bull 424 FC. Refer to the detailed installation diagrams provided separately with your product for precise measurements and wiring instructions.
4.1 Penyediaan Tapak
Ensure the gate operates smoothly manually before installing the opener. The installation area for the motor base should be level and stable, capable of supporting the unit's weight (approximately 60 lbs).
4.2 Mounting the Motor Base
Securely mount the Beninca Bull 424 FC motor base to a concrete pad or suitable foundation. The unit dimensions are approximately 13 inches (W) x 10 inches (D) x 23 inches (H). Proper alignment with the gate's chain path is critical.
4.3 Pemasangan Rantai
Attach the provided 20 ft chain to the gate and route it through the motor's drive sprocket. Ensure the chain is taut but not overly tight, allowing for smooth movement without excessive friction. Adjust chain tension as needed.
4.4 Sambungan Elektrik
Connect the motor to the control panel and provide power according to the wiring diagram. The control panel has a built-in receiver. All electrical work must comply with local regulations and be performed by a certified professional.
4.5 Photocell Installation
Install the Beninca PUPILLA.T true beam photocell set on opposite sides of the gate opening. These safety devices detect obstructions in the gate's path, preventing closure and enhancing safety. Ensure they are aligned correctly for reliable operation.
5. Arahan Operasi
5.1 Berpasangan Kawalan Jauh
To pair the TO.GO 2A remote controls with the built-in receiver in the control panel, follow the specific programming instructions provided with the control panel documentation. Typically, this involves pressing a programming button on the control board and then a button on the remote.
5.2 Basic Gate Operation
Once paired, press a programmed button on the remote control to initiate gate movement. A single press will typically open or close the gate. Pressing again during movement will stop the gate. The system features adjustable speed settings for smooth movement.
5.3 Ciri-ciri Keselamatan
The PUPILLA.T photocells will prevent the gate from closing if an obstruction is detected in its path. The gate will either stop or reverse direction, depending on the control panel's configuration. Test these safety features regularly.
6. Penyelenggaraan
Regular maintenance ensures the longevity and reliable operation of your gate opener. Perform these checks at least quarterly, or more frequently with heavy use.
- Clean the Motor Unit: Keep the motor housing free from dirt, debris, and insects.
- Lubricate the Chain: Apply a suitable lubricant to the drive chain to ensure smooth operation and prevent rust.
- Inspect Photocell Lenses: Clean the lenses of the PUPILLA.T photocells to ensure clear beam transmission and reception.
- Semak halangan: Ensure the gate's path is clear of any obstacles that could impede movement.
- Ciri Keselamatan Ujian: Periodically test the photocells and any other safety edges or sensors to confirm they are functioning correctly.
- Periksa Pendawaian: Check all electrical wiring for signs of wear, damage, or loose connections.
7. Penyelesaian masalah
Bahagian ini membincangkan isu-isu biasa yang mungkin anda hadapi. Untuk masalah yang tidak disenaraikan di sini, atau jika penyelesaian tidak menyelesaikan masalah, hubungi khidmat pelanggan.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pintu gerbang tidak bergerak. | No power; remote not paired; safety device activated; motor overload. | Check power supply; re-pair remote; clear photocell path; allow motor to cool. |
| Pintu pagar berhenti tanpa diduga. | Obstruction detected by photocells; gate friction; limit switch issue. | Clear obstruction; check gate for smooth manual movement; inspect limit switches. |
| Alat kawalan jauh tidak berfungsi. | Dead battery; out of range; not paired correctly. | Replace battery; move closer to receiver; re-pair remote. |
| Pintu bergerak perlahan atau dengan kesukaran. | Insufficient lubrication; gate friction; motor issue. | Lubricate chain and gate rollers; check gate alignment; consult technician. |
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Model | Beninca Bull 424 FC KIT |
| Kapasiti Pintu | Up to 800 lbs (max tested), recommended 400 lbs for 16 ft gates |
| Panjang Pintu | Sehingga 20 kaki |
| Jenis Motor | Chain-driven |
| Tork Motor | 12 Nm |
| Teras | 336 N |
| Kelajuan Boleh Laras | 1 ft/sec (Z17) |
| Daily Cycles | Sehingga 200 kitaran |
| Dimensi Unit (W x D x H) | 13" x 10" x 23" |
| Berat Barang | 60 paun |
| warna | Hitam, Kelabu |
| Komponen yang Disertakan | Motor base, Control panel with receiver, 20 ft chain, 2 TO.GO 2A Remotes, PUPILLA.T Photocell set |
9. Waranti dan Sokongan
For product support, technical assistance, or warranty inquiries, please contact the seller or manufacturer directly. This product typically includes a 30-day easy return policy from the point of purchase. Retain your proof of purchase for all warranty claims.
For customer support, refer to the contact information provided by your retailer or visit the official BENINCA webtapak.
