1. Pengenalan
The Electro-Harmonix 2020-2.0 Pedal Tuner is a compact and accurate chromatic tuner designed for guitar and bass. It features a high-visibility display and offers switchable True Bypass or Buffered Bypass modes for seamless integration into any pedalboard setup. This manual provides essential information for the proper setup, operation, and maintenance of your tuner.
Ciri-ciri utama termasuk:
- Chromatic pedal tuner with a tuning range of B0 to B7.
- Switchable True Bypass / Buffered Bypass for flexible signal routing.
- Output muting when engaged, ideal for live performance.
- High accuracy of +/- 1 cent.
- Adjustable calibration from 436-445Hz (1 Hz steps).
- Three flat tuning modes.
- Includes power adapter.
2. Persediaan
2.1 Sambungan Kuasa
Connect the included 9V DC power adapter to the 'DC 9V' input jack located on the rear of the pedal. Ensure the power supply meets the specified voltage and polarity requirements (center negative).
2.2 Sambungan Audio
- Input: Connect your instrument (guitar, bass, etc.) to the 'IN' jack on the right side of the pedal.
- Output: Sambungkan bicu 'OUT' di sebelah kiri pedal ke amplampu isyarat atau pedal seterusnya dalam rantai isyarat anda.
2.3 Bypass Mode Selection
The 2020-2.0 Pedal Tuner offers two bypass modes: True Bypass and Buffered Bypass. Use the 'BUFFER OFF ON' switch on the rear of the pedal to select your preferred mode.
- OFF (True Bypass): When the tuner is disengaged, your instrument's signal passes directly through the pedal without any electronic buffering. This preserves the original tone but may lead to signal degradation over long cable runs or complex pedal chains.
- ON (Buffered Bypass): When the tuner is disengaged, a high-quality buffer circuit maintains signal integrity, preventing tone loss over long cables or through multiple pedals. This is generally recommended for larger pedalboards.
3. Operasi
3.1 Engaging the Tuner
Press the footswitch to engage the tuner. When engaged, the display will activate, and the pedal's output will be muted, allowing for silent tuning during performances.
3.2 Membaca Paparan
The large, bright display shows the note being played and indicates whether it is sharp, flat, or in tune. The central bar indicates perfect pitch, while bars to the left indicate flat and bars to the right indicate sharp.
3.3 Penentukuran
The standard calibration (A4) is 440Hz. To adjust the calibration, press and hold the 'PITCH' button. The display will show the current calibration frequency. Use the 'PITCH' button to decrease the frequency and the 'FLAT' button to increase it. The calibration range is 436-445Hz in 1Hz steps. Release the button to set the new calibration.
3.4 Flat Tuning Modes
The tuner supports three flat tuning modes. To cycle through these modes, press the 'FLAT' button. Each press will add a flat symbol (b, bb, bbb) to the display, indicating tuning down by a semitone, two semitones, or three semitones, respectively. Pressing it a fourth time will return to standard tuning.
4. Penyelenggaraan
To ensure the longevity and optimal performance of your Electro-Harmonix 2020-2.0 Pedal Tuner, follow these general maintenance guidelines:
- Pembersihan: Use a soft, dry cloth to clean the exterior of the pedal. Avoid abrasive cleaners or solvents, which can damage the finish.
- Storan: Simpan pedal di persekitaran yang kering, jauh daripada suhu dan kelembapan yang melampau.
- Pengendalian: Handle the pedal with care. Avoid dropping it or subjecting it to strong impacts.
- Kuasa: Always use the specified 9V DC power adapter. Disconnect power when the pedal is not in use for extended periods.
5. Penyelesaian masalah
If you encounter issues with your Electro-Harmonix 2020-2.0 Pedal Tuner, refer to the following common troubleshooting steps:
- Tiada Kuasa/Paparan:
- Ensure the 9V DC power adapter is correctly connected to the pedal and a working power outlet.
- Sahkan penyesuai kuasa berfungsi dengan betul.
- Penalaan Tidak Tepat:
- Check the calibration setting (A4). Ensure it is set to your desired frequency (e.g., 440Hz).
- Ensure your instrument is properly intonated.
- Check for any loose connections in your signal chain.
- No Sound from Output:
- Confirm the tuner is disengaged (footswitch not pressed) if you expect sound to pass through. The output is muted when the tuner is active.
- Check all audio cables for proper connection and functionality.
- Verify the 'BUFFER' switch setting.
6. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Nombor Model | EHX-TUNER-V2 |
| Julat Penalaan | B0 hingga B7 |
| Ketepatan | +/- 1 sen |
| Julat Penentukuran | 436-445Hz (1 Hz steps) |
| Jenis Pintasan | Switchable True Bypass / Buffered Bypass |
| Bekalan Kuasa | 9V DC (center negative, adapter included) |
| Berat Barang | 12.3 auns (lebih kurang 348 gram) |
| Dimensi Produk | 3.75 x 1.5 x 1.25 inci (lebih kurang 9.5 x 3.8 x 3.2 cm) |
7. Maklumat Waranti
Electro-Harmonix products are designed for reliability and performance. For detailed warranty information, please refer to the warranty card included with your product or visit the official Electro-Harmonix webtapak. Terma jaminan biasanya meliputi kecacatan bahan dan mutu kerja untuk tempoh tertentu dari tarikh pembelian.
8. Sokongan
For further assistance, technical support, or service inquiries regarding your Electro-Harmonix 2020-2.0 Pedal Tuner, please contact Electro-Harmonix customer support or visit their official website. You can find contact details and additional resources at the Electro-Harmonix Store atau korporat utama mereka webtapak.
