Arahan Keselamatan Penting
AMARAN: BAHAYA TERTELAN. Produk ini mengandungi sel butang atau bateri syiling. KEMATIAN or serious injury can occur if ingested. A swallowed button cell or coin battery can cause Luka Bakar Bahan Kimia Dalaman dalam sedikit sebanyak 2 jam. Keep new and used batteries LUAR JUMPA KANAK-KANAK. Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
- Always ensure the power adapter is disconnected from the power source before installation, maintenance, or troubleshooting.
- Do not expose the tape light or power adapter to excessive heat or direct flame.
- Do not submerge the tape light or power adapter in water. While designed for indoor/outdoor use, ensure connections are secure and protected from direct water exposure.
- Only use the provided power adapter and remote control with this product.
- Do not attempt to repair or modify the tape light or its components. Refer all servicing to qualified personnel.
- Ensure the installation surface is clean, dry, and smooth for proper adhesion.
- Do not bend the tape light sharply or at angles less than 90 degrees to prevent damage to the LED circuits.
- Jauhkan bahan pembungkusan daripada kanak-kanak.
Kandungan Pakej
Sahkan bahawa semua komponen yang disenaraikan di bawah disertakan dalam pakej anda:

Rajah 1: Kandungan Pakej
- 1x Feit Electric 20ft Chasing & Tunable White LED Tape Light
- 1x Alat Kawalan Jauh
- 1x Penyesuai Kuasa
- 10x Klip Pemasangan
- 20x Skru
Spesifikasi
Detailed technical specifications for the Feit Electric LED Tape Light:
| Nombor Model | TAPE240/CHASE |
| Panjang | 20 kaki (6.1 meter) |
| Linkable Length | Sehingga 40 kaki (12.2 meter) |
| Output Cahaya | 1000 Lumens (Kecerahan Putih) |
| Penggunaan Kuasa | 24 Watt |
| Voltage | 24 Volt DC |
| Warna Cerah | RGB (Red, Green, Blue) + Tunable White |
| Ciri Khas | Remote Controlled, Dimmable, Chasing Effects, Cut-to-Size, Linkable |
| Penggunaan Dalaman/Luar | Yes (Weather Resistant) |
| Jangka hayat | 25,000 Jam |
| Dimensi (Lebar) | 0.4 inci (10mm) |
| Kaedah Kawalan | Alat kawalan jauh inframerah |

Rajah 2: Ciri dan Dimensi Produk
Panduan Persediaan
Follow these steps for proper installation of your LED Tape Light:
- Rancang Susun Atur Anda: Before peeling the adhesive, unroll the tape light and lay it out in your desired location to confirm the length and placement. Ensure the power adapter can reach an outlet.
- Sediakan Permukaan: Clean the installation surface thoroughly. It must be dry, smooth, and free of dust, dirt, or grease for optimal adhesive performance.
- Cut to Size (Optional): If a shorter length is required, locate the designated cutting marks on the tape light (typically indicated by a scissor icon or copper pads). Cut only at these marked points to avoid damaging the circuit.
- Apply the Tape Light: Carefully peel off the backing from the adhesive strip on the back of the tape light. Press the tape light firmly onto the prepared surface, working in small sections to ensure good contact and avoid air bubbles.
- Selamat dengan Klip (Pilihan): For added security, especially on textured surfaces or in high-traffic areas, use the included mounting clips and screws. Space them evenly along the tape light.
- Sambungkan Kuasa: Plug the tape light connector into the power adapter. Then, plug the power adapter into a standard electrical outlet.
- Link Multiple Strips (Optional): If linking multiple 20ft strips (up to a maximum of 40ft total), connect them end-to-end using the integrated connectors. Ensure the power supply is adequate for the total length.

Gambar 3: Cthample Indoor Installation (Kitchen)

Gambar 4: Cthample Outdoor Installation (Patio)
Arahan Operasi
Control your Feit Electric LED Tape Light using the included remote control:

Figure 5: Remote Control and Tape Light
- Hidupkan/Mati Kuasa: Tekan ke Butang kuasa (red button, top right) to turn the lights on or off.
- Pelarasan Kecerahan: Gunakan Kecerahan Naik (▲) dan Kecerahan Turun (▼) buttons to adjust the light intensity.
- Pilihan Warna:
- Tekan ke RGB color buttons (Red, Green, Blue, etc.) to select a static color.
- Tekan ke "W" button for Tunable White light.
- Mod Dinamik:
- Chasing Kesan: Gunakan "Chase" button to activate dynamic chasing light patterns.
- Mod Lain: Explore buttons like "Flash", "Strobe", "Fade", dan "Smooth" for various light transitions and effects.
- Pelarasan Kelajuan: Gunakan Percepatkan dan Kelajuan Turun buttons to control the pace of dynamic modes.
- Fungsi Pemasa: Some remotes may include a timer function. Refer to the remote's specific markings for details.

Figure 6: Kitchen with Red Light

Figure 7: Kitchen with Warm White Light

Figure 8: Kitchen with Cool White Light
Penyelenggaraan
To ensure the longevity and optimal performance of your LED Tape Light, follow these maintenance guidelines:
- Pembersihan: Disconnect the power adapter before cleaning. Use a soft, dry, or slightly damp cloth to wipe the tape light. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the product.
- Pemeriksaan: Periodically inspect the tape light and power adapter for any signs of damage, such as frayed wires, cracks, or loose connections. If any damage is found, discontinue use and contact customer support.
- Storan: If storing the tape light for an extended period, ensure it is clean and dry. Coil it loosely to prevent kinks or damage to the LED strip. Store in a cool, dry place away from direct sunlight.
- Penggantian Bateri (Alat Kawalan Jauh): If the remote control's range or responsiveness decreases, the battery may need replacement. Refer to the remote's battery compartment for the correct battery type (typically a CR2025 or similar coin cell battery) and replacement instructions. Ensure proper polarity.
Menyelesaikan masalah
If you encounter issues with your Feit Electric LED Tape Light, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lampu tidak menyala. | Tiada kuasa, sambungan longgar, penyesuai kuasa rosak. |
|
| Alat kawalan jauh tidak berfungsi. | Remote battery is dead, remote is too far, obstruction, IR receiver blocked. |
|
| Lampu malap atau berkelip-kelip. | Insufficient power, damaged section of tape light, loose connection. |
|
| Pelekat tidak melekat. | Improper surface preparation, surface type. |
|
Maklumat Waranti
This Feit Electric LED Tape Light is covered by a Waranti pengilang selama 1 tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accidents, unauthorized repairs, or modifications. Please retain your proof of purchase for warranty claims.
Sokongan Pelanggan
For further assistance, technical support, or warranty inquiries, please contact Feit Electric customer support.
Visit our online support portal for FAQs and contact options:
https://help.feit.com/hc/en-us





