RAF R.2862 3-in-1 Cordless Food Processor User Manual

1. Maklumat Keselamatan Penting

Please read all instructions carefully before using your RAF R.2862 Cordless Food Processor. Keep this manual for future reference.

• Always ensure the appliance is fully charged before use for optimal performance.
• Jauhkan tangan dan perkakas daripada mangkuk pemprosesan semasa beroperasi untuk mengelakkan kecederaan.
• Bilahnya tajam. Kendalikan dengan berhati-hati semasa pemasangan, pembongkaran dan pembersihan.
• Jangan rendam tapak motor di dalam air atau sebarang cecair lain. Bersih dengan iklanamp kain sahaja.
• Perkakas ini tidak dimaksudkan untuk digunakan oleh orang yang kurang keupayaan fizikal, deria, atau mental, atau kurang pengalaman dan pengetahuan, melainkan mereka telah diberi pengawasan atau arahan mengenai penggunaan perkakas oleh orang yang bertanggungjawab untuk keselamatan mereka.
• Pastikan penutupnya terkunci dengan kukuh sebelum mengendalikan pemproses makanan.
• Do not attempt to process extremely hard foods that may damage the blades or motor.

2. Produk Lebihview dan Komponen

The RAF R.2862 is a versatile 3-in-1 cordless food processor designed for chopping, mixing, and blending various ingredients. Familiarize yourself with its components:

• Pangkalan Motor: Contains the powerful 200W motor and rechargeable battery.
• Mangkuk Pemprosesan: Transparent bowl for holding ingredients.
• Tudung dengan Tiub Pengumpan: Secures the bowl and allows adding ingredients during operation.
• Penolak: Digunakan untuk membimbing bahan-bahan melalui tiub pengumpan.
• Perhimpunan Pisau Cincang: Sharp blades for efficient chopping and blending.
• Disc Accessory: For slicing or grating (refer to specific disc type if included).
• Suis Kawalan: On/Off and speed selection (if applicable).
• Port Pengecasan: Untuk menyambungkan kabel pengecasan.

Rajah 2.1: Depan view of the RAF R.2862 Cordless Food Processor.

Rajah 2.2: Sisi view of the RAF R.2862 Cordless Food Processor, showing the control switch.

Figure 2.3: RAF R.2862 Cordless Food Processor with approximate dimensions.

Figure 2.4: The RAF R.2862 Cordless Food Processor shown with its packaging and an example disc accessory.

3. Persediaan dan Penggunaan Awal

3.1 Membongkar

1. Keluarkan semua komponen dari pembungkusan dengan berhati-hati.
2. Keluarkan sebarang filem pelindung atau bahan pembungkusan.
3. Periksa perkakas untuk sebarang kerosakan. Jangan gunakan jika rosak.

3.2 Pengecasan Awal

As this is a cordless appliance, it requires charging before first use.

1. Locate the charging port on the motor base.
2. Connect the provided charging cable to the port and plug the other end into a suitable power outlet.
3. Allow the unit to charge fully. The charging indicator light (if present) will change or turn off when charging is complete. This may take several hours.

3.3 Perhimpunan

1. Letakkan tapak motor pada permukaan yang bersih, stabil dan kering.
2. Carefully place the chopping blade assembly onto the central shaft inside the processing bowl. Ensure it sits firmly.
3. Place the processing bowl onto the motor base, aligning the tabs and twisting clockwise until it locks into place.
4. Place the lid onto the processing bowl, aligning the tabs and twisting clockwise until it locks securely. The appliance will not operate unless the lid is properly locked.

3.4 Pembersihan Penggunaan Pertama

Before first use, wash all parts that will come into contact with food (processing bowl, lid, blades, pusher, discs) in warm, soapy water. Rinse thoroughly and dry completely.

4. Arahan Operasi

4.1 Menyediakan Bahan

• Cut large food items into smaller, uniform pieces (approximately 2-3 cm) to ensure even processing.
• Remove any hard pits, bones, or tough skins from fruits and vegetables.

4.2 Processing Food

1. Ensure the food processor is fully assembled and charged.
2. Place the prepared ingredients into the processing bowl. Do not overfill; observe the maximum fill line if indicated.
3. Securely attach the lid by twisting it clockwise until it locks.
4. If using the feeder tube for slicing/grating, place the desired disc onto the shaft before securing the lid. Then, place ingredients into the feeder tube and use the pusher to guide them.
5. Press and hold the control switch to start processing. Release to stop. For pulse action, press and release repeatedly.
6. Proses sehingga mencapai kepekatan yang diingini.
7. Once processing is complete, release the control switch. Wait for the blades to completely stop before attempting to remove the lid.
8. Twist the lid counter-clockwise to unlock and remove it. Carefully remove the blade assembly before emptying the bowl.

Nota: For optimal results and to prevent motor strain, avoid continuous operation for extended periods. Use pulse action for tough ingredients.

5. Penyelenggaraan dan Pembersihan

Pembersihan berkala memastikan jangka hayat dan operasi bersih pemproses makanan anda.

5.1 Pembongkaran untuk Pembersihan

1. Ensure the appliance is turned off and disconnected from the charger.
2. Remove the lid, then carefully remove the blade assembly or disc.
3. Remove the processing bowl from the motor base.

5.2 Komponen Pembersihan

• Processing Bowl, Lid, Blades, Pusher, Discs: Wash these parts in warm, soapy water. Use a brush for hard-to-reach areas and exercise extreme caution when handling blades. Rinse thoroughly and dry immediately to prevent water spots and rust. These parts may be dishwasher safe (top rack only), but hand washing is recommended for longevity.
• Pangkalan Motor: Lap bahagian luar tapak motor dengan lembut, damp cloth. Do not immerse the motor base in water or rinse it under running water. Ensure it is completely dry before storing or recharging.

5.3 Penyimpanan

Store the food processor in a clean, dry place, out of reach of children. Ensure all parts are dry before reassembling for storage.

6. Penyelesaian masalah

Jika anda menghadapi masalah dengan pemproses makanan anda, rujuk kepada masalah dan penyelesaian biasa berikut:

7. Spesifikasi

8. Waranti dan Sokongan

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or service inquiries, please contact the manufacturer or your local distributor.