Anern 3600W Hybrid Solar Inverter User Manual

1. Pengenalan

This manual provides essential information for the safe and efficient operation of your Anern 3600W Hybrid Solar Inverter. This all-in-one unit integrates a 3600W pure sine wave inverter, a 120A MPPT solar charge controller, and a battery charger. It is designed to convert 24V DC power to 110V/120V AC power, suitable for various home backup, RV, and off-grid applications. Please read this manual thoroughly before installation and use.

Figure 1: Anern 3600W Hybrid Solar Inverter (Model Anern-3600)

2. Maklumat Keselamatan

Observe the following safety precautions to prevent injury and damage to the inverter or connected equipment:

• Pemasangan mesti dilakukan oleh kakitangan yang berkelayakan.
• Pastikan semua pendawaian mematuhi kod elektrik tempatan dan nasional.
• Jangan buka penyongsang. Tiada bahagian yang boleh diservis pengguna di dalamnya.
• Disconnect all power sources (PV, battery, AC input) before performing any wiring or maintenance.
• Elakkan sentuhan dengan terminal hidup.
• Install the inverter in a well-ventilated area, away from flammable materials and moisture.
• Pastikan pembumian penyongsang yang betul.
• This inverter is equipped with multiple protection features including overcurrent, low-voltage, short-circuit, overheating, and overload protection.

Figure 2: Inverter Protection Features and Wi-Fi Monitoring Capability

3. Ciri-ciri Produk

The Anern 3600W Hybrid Solar Inverter offers a range of features for reliable power management:

• Sistem Bersepadu: Combines a 3600W pure sine wave inverter, 120A MPPT solar charge controller, and battery charger.
• Kecekapan Tinggi: Solar charge module utilizes optimized MPPT tracking technology for up to 98% efficiency.
• Keserasian Bateri: Supports 24V Lead-Acid (Sealed, AGM, Gel, Flooded) and Lithium batteries. Includes built-in lithium activation.
• Operasi Tanpa Bateri: Capable of powering loads directly from the PV array without a connected battery.
• Dual AC Output: Provides two AC outputs for flexible load management.
• Paparan LCD: Features a responsive RGB LCD screen and indicator LEDs for real-time monitoring and configuration.
• Berbilang Mod Pengendalian: Offers 4 charging modes and 2 output modes to suit diverse application needs.
• Perlindungan Komprehensif: Includes protection against overvoltage, undervoltage, reverse polarity, short circuits, overheating, and overload.
• Pemantauan Jauh: Supports Wi-Fi monitoring for system control via a mobile application.

Figure 3: Key Specifications and Features Overview

Figure 4: Battery Compatibility and Battery-Free Operation

4. Kandungan Pakej

Sahkan bahawa semua item disertakan dalam pakej anda:

• Anern 3600W Hybrid Solar Inverter (Model Anern-3600)
• Manual Pengguna (dokumen ini)
• Mounting accessories (if applicable, check packaging)
• Communication cable (if applicable, for Wi-Fi module)

5. Arahan Persediaan

5.1. Membongkar dan Pemeriksaan

Carefully unpack the inverter and inspect it for any shipping damage. If any damage is found, contact your supplier immediately.

5.2. Memasang Inverter

Select a suitable location for mounting the inverter. It should be:

• Indoors, protected from direct sunlight, rain, and dust.
• Well-ventilated to ensure adequate heat dissipation.
• Mounted vertically on a solid surface.
• Boleh diakses untuk pendawaian dan penyelenggaraan.

Use appropriate mounting hardware (not always included) to secure the inverter to the wall.

5.3. Sambungan Pendawaian

All wiring must be performed with all power sources disconnected. Refer to the wiring diagram (usually found on the inverter or in a detailed wiring section of the full manual) for specific terminal connections.

1. Sambungan Bateri: Connect the 24V battery bank to the inverter's battery terminals. Ensure correct polarity (+ to + and - to -). Use appropriately sized cables and fuses.
2. Sambungan Tatasusunan PV: Connect the solar panel array to the PV input terminals. Observe correct polarity and ensure the PV input voltage and current are within the inverter's specifications (Max PV Power 4200W, Max DC Voltage 500VDC).
3. AC Input Connection (Grid/Generator): If connecting to a utility grid or generator, connect the AC input to the designated terminals.
4. Sambungan Output AC (Beban): Connect your AC loads (appliances) to the inverter's AC output terminals. The inverter features dual AC outputs.
5. Pembumian: Sambungkan terminal pembumian penyongsang ke pembumian yang boleh dipercayai.

5.4. Pengaktifan dan Konfigurasi Awal

After all connections are secure and verified:

1. Turn on the battery breaker/switch.
2. Turn on the PV array breaker/switch.
3. If applicable, turn on the AC input breaker.
4. The inverter will power on and the LCD display will illuminate.
5. Use the control buttons on the LCD panel to configure system settings such as charging current, voltage thresholds, and priority modes according to your requirements.

Figure 5: Dual AC Output and RGB LCD Display for Configuration

6. Mod Operasi

The inverter supports various charging and output modes to optimize power usage.

6.1. Mod Pengecasan

You can select one of four charging modes:

• Hanya Suria: The inverter charges the battery exclusively from solar energy.
• Mains Supply Priority: The inverter prioritizes charging from the utility grid (mains supply). Solar energy will supplement if available.
• Keutamaan Suria: The inverter prioritizes charging from solar energy. The utility grid will be used if solar power is insufficient.
• Mains Supply and Solar Charging Combination: The inverter uses both mains supply and solar energy to charge the battery simultaneously.

6.2. Mod Output

The inverter offers two output modes for continuous power supply:

• Power Bypass: In this mode, loads are powered directly from the AC input (utility grid or generator), bypassing the inverter. The inverter acts as a charger.
• Output Penyongsang: Loads are powered by the inverter, drawing energy from the battery or directly from the PV array (if in battery-free mode).

Figure 6: Charging and Output Mode Diagram

7. Penyelenggaraan

Regular maintenance ensures optimal performance and longevity of your inverter:

• Pembersihan: Periodically clean the inverter's exterior and ventilation openings to prevent dust buildup, which can hinder cooling. Use a dry, soft cloth.
• Semakan Sambungan: Annually inspect all electrical connections for tightness and corrosion. Loose connections can cause overheating and poor performance.
• Pemeriksaan Alam Sekitar: Pastikan persekitaran pemasangan kekal dalam julat suhu dan kelembapan yang ditetapkan.
• Pemeriksaan Bateri: If using lead-acid batteries, check electrolyte levels and terminal condition as per battery manufacturer guidelines.
• Kemas kini Firmware: Semak pengeluar weblaman web untuk sebarang kemas kini perisian tegar yang tersedia untuk prestasi yang lebih baik atau ciri baharu.

8. Penyelesaian masalah

Bahagian ini menyediakan penyelesaian kepada isu biasa. Untuk masalah yang tidak disenaraikan di sini, hubungi sokongan teknikal.

9. Spesifikasi

Detailed technical specifications for the Anern 3600W Hybrid Solar Inverter:

10. Waranti dan Sokongan

For warranty information, please refer to the documentation provided with your purchase or contact Anern customer service. If you encounter any issues or require technical assistance, please reach out to Anern support through their official webtapak atau saluran kenalan.