HITBOX 5 in 1 Aluminum MIG Welder Instruction Manual

1. Pengenalan

The HITBOX SYNMIG200PRO is a versatile 5-in-1 synergic control welding machine designed for various welding applications. It features a digital LCD display that guides the user through the welding process, making it suitable for both experienced welders and beginners. This machine supports MIG Gas, MIG Gasless (FCAW-S), MMA (Stick), and Lift TIG welding modes, and is capable of welding aluminum, iron, carbon steel, and stainless steel.

Figure 1.1: The HITBOX SYNMIG200PRO 5-in-1 Aluminum MIG Welder with included accessories, including the welding machine, MIG torch, earth clamp, dan pemegang kayu.

2. Maklumat Keselamatan

Sentiasa mengutamakan keselamatan semasa mengendalikan peralatan kimpalan. Kegagalan mematuhi garis panduan keselamatan boleh mengakibatkan kecederaan serius atau kematian.

• Perlindungan Mata dan Muka: Always wear a welding helmet with appropriate shade lenses to protect your eyes and face from intense light, UV radiation, and sparks.
• Perlindungan Badan: Wear flame-resistant clothing, welding gloves, and safety shoes to protect against burns and electrical shock.
• Pengudaraan: Ensure adequate ventilation in the work area to remove welding fumes and gases. If working in confined spaces, use a respirator.
• Keselamatan Elektrik: Ensure the welding machine is properly grounded. Do not operate in wet conditions. Inspect cables and connections for damage before each use.
• Pencegahan Kebakaran: Jauhkan bahan mudah terbakar dari kawasan kimpalan. Sediakan alat pemadam api.
• Machine Protections: The SYNMIG200PRO is equipped with Voltage Reduction Device (VRD), Overheating Protection, and Over Current Protection for enhanced safety.

Figure 2.1: The HITBOX SYNMIG200PRO features multiple safety protections, including VRD, overheating protection, welding aluminum capability, silence protection, and overcurrent protection, along with a fan-on-demand system.

3. Produk Lebihview

The HITBOX SYNMIG200PRO is a compact and powerful welding machine offering multiple welding processes. Its intuitive LCD display simplifies parameter adjustments, making it user-friendly.

3.1 Ciri-ciri Utama

• 5-in-1 Welding Modes: MIG Gas, MIG Gasless, MMA, Lift TIG, and Spool Gun compatibility.
• Synergic Control: Automatic parameter recommendations based on material, wire/electrode size, and thickness.
• Digital LCD Display: Clear interface for monitoring and adjusting welding settings.
• Wide Material Compatibility: Capable of welding aluminum, iron, carbon steel, and stainless steel.
• Reka Bentuk Mudah Alih: Ringan dan padat untuk pengangkutan mudah.

Figure 3.1: The HITBOX SYNMIG200PRO offers five welding functions: MIG Gas, MIG Gasless, MMA, Lift TIG, and Spool Gun compatibility.

Figure 3.2: The compact dimensions of the HITBOX SYNMIG200PRO, measuring approximately 17.7 inches (45 cm) in length, 7.9 inches (20 cm) in width, and 13 inches (33 cm) in height.

4. Persediaan

4.1 Sambungan Kuasa

Connect the welder to a suitable 220V AC power source. Ensure the power outlet meets the machine's requirements. The machine can resist cable attenuation even with extended power cords up to 160 feet.

4.2 Wire Reel Installation (for MIG/MAG/FCAW-S)

The machine is designed to handle 1-5kg (11lb-21lb) wire reels. Follow these steps to install the wire reel:

1. Open the wire feeder compartment.
2. Place the wire reel onto the spindle, ensuring it rotates freely.
3. Secure the reel with the retaining nut.
4. Feed the wire through the guide tube and into the wire feeder mechanism.
5. Tutup petak.

Figure 4.1: Illustration of how to install 1-5kg (11lb-21lb) wire reels into the welding machine's wire feeder compartment.

4.3 Connection Methods for Different Modes

Properly connect the welding accessories based on the desired welding mode:

Figure 4.2: Connection diagrams for various welding modes: MMA (Stick Holder +, Earth Clamp -), MIG Gasless (Earth Clamp +, Mig Torch -), MIG Gas (Mig Torch +, Earth Clamp -), and Lift TIG (Earth Clamp +, WP-26V TIG Gun -).

• Kimpalan MMA (Tongkat): Connect the stick holder to the positive (+) terminal and the earth clamp ke terminal negatif (-).
• MIG Gasless Welding: Sambung bumi clamp ke terminal positif (+) dan obor MIG ke terminal negatif (-).
• MIG Gas Welding: Connect the MIG torch to the positive (+) terminal and the earth clamp to the negative (-) terminal. Ensure gas cylinder and regulator are properly connected.
• Angkat Kimpalan TIG: Sambung bumi clamp to the positive (+) terminal and the WP-26V TIG gun (not included) to the negative (-) terminal.

5. Mod Operasi

5.1 Synergic Control and LCD Display

The SYNMIG200PRO features synergic control, which simplifies setup by automatically recommending welding parameters. The LCD display provides real-time information and allows for fine-tuning.

Figure 5.1: The LCD display of the SYNMIG200PRO showing synergic control parameters, including wire feed speed, voltage, welding mode, gas type, material, wire diameter, and metal thickness.

Untuk beroperasi:

1. Select the desired welding mode (MIG, MMA, TIG) on the display.
2. Input the material type (e.g., Fe for Iron, Al for Aluminum).
3. Specify the wire/electrode/tungsten size.
4. Enter the plate thickness.
5. The machine will recommend suitable current and voltage settings. Adjust as needed for optimal results.

5.2 Kimpalan MIG/MAG

This mode is suitable for 0.6mm, 0.8mm, and 1.0mm solid wires with MIX GAS or CO2 gas. It is effective for welding metal plates from 0.7mm to 8mm thick. The 2T/4T function helps reduce hand fatigue during extended welding sessions. The welding molten pool is well-formed, with a stable arc and minimal spatter.

5.3 FCAW-S (Gasless MIG) Welding

This mode uses 0.6mm to 1.0mm flux-cored wire and is suitable for welding plates from 1mm to 6.4mm thick. It does not require external shielding gas.

5.4 LIFT TIG Welding

Lift TIG welding is compatible with 1.6mm and 2.4mm tungsten electrodes. It can weld materials with a thickness of 1.0mm to 6.4mm. A WP-26V TIG torch (not included) is recommended for this mode.

5.5 MMA (ARC) Welding

This mode supports 2.5mm, 3.2mm, and 4.0mm electrodes. It is suitable for welding plates from 1.6mm to 8.0mm thick. The machine maintains normal operation even with a 160-foot power cord extension, making it ideal for various job sites.

5.6 Applicable Materials and Applications

The HITBOX SYNMIG200PRO can weld a variety of metals and is suitable for numerous applications:

• Bahan boleh dikimpal: Aluminum (requires graphite conduit liner replacement), Iron, Carbon Steel, Stainless Steel, Copper.
• Permohonan: Pipe installations, mold repairs, petrochemical industry, architectural decorations, car repairs, bicycle fabrication, handicrafts, general manufacturing, construction sites, house maintenance, docks, and agricultural sites.

Figure 5.2: The HITBOX SYNMIG200PRO is capable of welding various metals, including aluminum, stainless steel, iron, and copper.

Gambar 5.3: Cthamples of wide applications for the HITBOX welder, including welded iron frames, pipes, shelves, outdoor welding, welding sheds, and welding crafts.

6. Penyelenggaraan

Penyelenggaraan tetap memastikan jangka hayat dan prestasi optimum mesin kimpalan anda.

• Pembersihan: Bersihkan bukaan luar dan pengudaraan mesin secara berkala untuk mengelakkan pengumpulan habuk dan serpihan. Gunakan udara termampat untuk membersihkan komponen dalaman jika perlu, pastikan mesin dicabut daripada plagnya.
• Pemeriksaan Kabel: Periksa semua kabel kimpalan, lampu suluh dan penutup bumi secara berkalaamp for cuts, fraying, or loose connections. Replace damaged components immediately.
• Penyelenggaraan Pengumpan Wayar: For MIG/MAG welding, ensure the wire feeder rollers are clean and free of debris. Check for proper tension.
• Storan: Simpan mesin kimpal di persekitaran yang kering dan bersih apabila tidak digunakan.

7. Penyelesaian masalah

If you encounter issues with your HITBOX SYNMIG200PRO, refer to the following common troubleshooting steps:

• Tiada Kuasa: Check the power cord connection, wall outlet, and circuit breaker. Ensure the machine's power switch is in the 'ON' position.
• Tiada Lengkungan: Verify that the earth clamp is securely attached to the workpiece and has good electrical contact. Check the welding torch connection. Ensure correct welding mode and parameters are selected.
• Kualiti Kimpalan yang Buruk: Adjust welding parameters (current, voltage, wire feed speed) according to the material and thickness. Ensure proper gas flow (for MIG Gas) or correct wire type (for FCAW-S). Clean the workpiece surface.
• Isu Pemberian Kawat: Check for tangled wire, correct wire reel installation, and proper tension on the wire feeder rollers. Ensure the MIG torch liner is not clogged or damaged.
• Overheating Protection Activated: If the machine stops and the overheating indicator lights up, allow the machine to cool down. Ensure adequate ventilation around the machine. Reduce the duty cycle or welding current if continuously triggering protection.

Untuk isu yang berterusan, hubungi sokongan pelanggan.

8. Spesifikasi

9. Waranti dan Sokongan

HITBOX provides a 1-year warranty for this product. If you encounter any problems during use, please contact HITBOX customer support. They offer efficient and professional assistance through their US local agent.

For support, please refer to the contact information provided with your product packaging or visit the official HITBOX webtapak.