Ortur LU2-10A 10000mW Laser Module Instruction Manual

1. Pengenalan

This manual provides essential information for the safe and effective use of your Ortur LU2-10A 10000mW Laser Module. Please read these instructions carefully before installation and operation. This laser module is designed for high-precision engraving and cutting with Ortur Laser Engravers.

2. Kandungan Pakej

Sahkan bahawa semua komponen yang disenaraikan di bawah terdapat dalam pakej anda:

Imej: Terperinci view of all components included in the Ortur LU2-10A Laser Module package, such as the laser module, laser shield, air assist, various screws, cables, and tools.

LU2-10A Laser Module
Laser Shield
Bantuan Udara
Blok Sokongan
peluncur
OUC2.0
Small Coupling
Penyesuai Kuasa 24V 2A
Dedicated LaserWire
Paip Udara
Penyambung Paip
Normal Adapter Cable
Laser Backboard
M3x5mm Screws*6 (Used for Slider)
Thumb Screws*2
M3x8mm Screws*4 (Used for OLM2S2)
M3x12mm Screws*4 (Used for OLM2)
Pengikat Kabel*10
M3 Gasket*1
sepana
Lensa
Pengatur Aliran Udara
OLM2/S2 OUC Exclusive Adapter Cable

3. Persediaan dan Pemasangan

This section guides you through the assembly and installation of the LU2-10A Laser Module onto your Ortur Laser Engraver. Ensure the engraver is powered off and disconnected from the power source before beginning installation.

3.1. Installation Tutorial Video

Video: A detailed installation tutorial for the Ortur Laser Master 2 Pro S2 LU2-10A, demonstrating step-by-step assembly and connection procedures.

3.2. Laser Module Installation Steps

Attach the laser module to the engraver's carriage.
Secure the laser module using the provided thumbscrews.
Insert the 5-pin terminal of the dedicated laser line into the laser module's port.
Connect the other end of the laser line to the appropriate port on the engraver's control board.
Install the laser shield onto the laser module to ensure eye protection during operation.
Connect the air assist hose to the air intake port on the laser module and to an external air pump (not included).

Ortur LU2-10A Laser Module installed on engraver, cutting wood

Image: The Ortur LU2-10A Laser Module actively cutting a piece of wood, demonstrating its operational capability.

4. Arahan Operasi

The Ortur LU2-10A Laser Module offers powerful and precise capabilities for various materials.

4.1. Ciri-ciri Utama

Keserasian Luas: Compatible with Ortur Laser Master 2, Ortur Laser Master 2 S2, Ortur Laser Master 2Pro S2, and Ortur Laser Master 3 Laser Engravers.
Material Versatility: Engrave and cut acrylic, metal, wood, stainless steel, glass, ceramics, leather, food, paper, fabric, and more.
Output Kuat: True 10000mW laser output for effective cutting and engraving.
Ketepatan Tinggi: Compressed spot size of 0.05mm x 0.1mm for detailed work.
Kecekapan Tinggi: Lightweight design (235g) allows for engraving speeds up to 15000mm/min.
Dual Fan Cooling: Optimized cooling system ensures stable long-term operation without overheating.
Operasi Stabil: 24V electrical system and high-quality cables support 24 hours of uninterrupted, consistent engraving.

4.2. Engraving and Cutting Capabilities

The LU2-10A module is capable of cutting various materials with significant thickness:

Up to 30mm acrylic.
Up to 20mm wood.

Diagram showing dual laser beams combining for 10W output and 0.05x0.1mm compressed spot

Image: An internal diagram illustrating how two 5.5W laser beams are combined using light combing lenses to achieve a true 10W output with a precise 0.05 x 0.1mm compressed spot.

Ortur LU2-10A Laser Module with air intake and lightweight design

Image: The Ortur LU2-10A Laser Module highlighting its air intake for cooling and its lightweight design (only 235g), contributing to high engraving speeds.

Dalaman view of Ortur LU2-10A Laser Module showing dual 5.5W lasers

Imej: Telus view of the Ortur LU2-10A Laser Module, showing the internal arrangement of two 5.5W lasers combining to form a single 10W output beam.

Ortur LU2-10A Laser Module with built-in air assist and comparison of cut quality

Image: The Ortur LU2-10A Laser Module featuring its built-in air assist system, with an example showing a cleaner cut (labeled "Ours") compared to a cut without air assist (labeled "Other").

Diagram illustrating the 0.05mm x 0.1mm compressed laser spot for extreme engraving

Image: A visual representation of the laser's compressed spot, showing its dimensions of 0.05mm x 0.1mm, which enables extreme precision in engraving.

5. Penyelenggaraan

Regular maintenance ensures optimal performance and extends the lifespan of your laser module.

Pembersihan Kanta: Periodically clean the laser lens with a soft, lint-free cloth and appropriate lens cleaning solution to prevent residue buildup that can affect laser performance.
Muncung Bantuan Udara: Ensure the air assist nozzle is clear of debris to maintain effective airflow during cutting and engraving.
Kipas penyejuk: Check the dual cooling fans for dust accumulation and clean them gently to ensure proper heat dissipation.
Pemeriksaan Kabel: Regularly inspect all cables for any signs of wear, damage, or loose connections.

6. Penyelesaian masalah

This section addresses common issues you might encounter with your Ortur LU2-10A Laser Module.

Masalah	Kemungkinan Punca	Penyelesaian
Laser tidak menyala atau output lemah.	Sambungan kabel longgar. Dirty laser lens. Incorrect power settings in software. Laser module overheating.	Check all cable connections, especially the 5-pin laser line. Clean the laser lens as per maintenance instructions. Verify laser power and speed settings in your engraving software. Ensure cooling fans are clear and functioning. Allow module to cool if hot.
Inconsistent engraving/cutting results.	Unstable engraver frame. Loose belts or rollers. Material not flat or secured. Fokus yang salah.	Ensure the engraver frame is stable and all screws are tightened. Check and adjust belt tension and roller tightness. Secure the material firmly to the work surface. Verify the laser focus is correctly set for the material thickness.
Air assist not functioning.	Blocked air assist nozzle. Loose air hose connection. External air pump issue.	Clear any debris from the air assist nozzle. Check all air hose connections for tightness. Ensure your external air pump is powered on and functioning correctly.

7. Spesifikasi

Ciri	Perincian
Dimensi Produk	4.72 x 1.97 x 1.73 inci
Nombor Model Item	Ortur-LaserMaster2-ProS2 (LU2-10A variant)
Berat Barang	1.54 paun
Kuasa Keluaran Laser	10000mW (10W)
Compressed Spot Size	0.05mm x 0.1mm
Kelajuan Ukiran	Up to 15000mm/min
Sistem Penyejukan	Dual Fan Cooling
Sistem Elektrik	24V
Keserasian	Ortur Laser Master 2, 2 S2, 2Pro S2, 3

8. Waranti dan Sokongan

For warranty information, technical support, or further assistance, please refer to the official Ortur webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan resit pembelian anda sebagai bukti pembelian.

Official Ortur Webtapak: www.ortur.net