1. Pengenalan
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT E3 Dual Motor Electric Standing Desk. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Maklumat Keselamatan Penting
To prevent injury and ensure optimal performance, please adhere to the following safety guidelines:
- Sentiasa pastikan meja dipasang dengan betul dan stabil sebelum digunakan.
- Jangan melebihi had berat maksimum 220 paun (100 kg).
- Be cautious when adjusting the desk height to avoid injury from pinching or crushing. Ensure no objects or body parts are in the path of the moving desk.
- Jauhkan kanak-kanak dan haiwan peliharaan dari meja semasa operasi.
- Jangan duduk atau berdiri di atas meja.
- Hanya gunakan penyesuai kuasa dan komponen yang disediakan.
- If any unusual noise or movement occurs, immediately stop operation and unplug the desk.
3. Persediaan dan Pemasangan
The FLEXISPOT E3 desk requires assembly. It typically arrives in two separate packages. While the lower frame assembly is straightforward, the desktop may require drilling approximately 20 holes for secure attachment. It is recommended to have two people for assembly due to the weight of the components.
3.1. Kandungan Pakej
Verify that all components are present before beginning assembly. Refer to the included assembly guide for a complete list of parts.
3.2. Langkah Perhimpunan
- Buka bungkusan semua komponen dan letakkannya di atas permukaan yang bersih dan lembut untuk mengelakkan calar.
- Assemble the desk frame according to the detailed instructions provided in the separate assembly guide.
- Attach the desktop to the assembled frame. Ensure proper alignment before securing with screws. Note that pre-drilled holes may not be present on the desktop, requiring careful drilling.
- Connect the control panel and power cables as instructed.
- Place the desk in its desired location, ensuring it is level and stable.
4. Arahan Operasi
The FLEXISPOT E3 desk features a dual-motor system for smooth and quiet height adjustments, controlled by a programmable panel.
4.1. Panel Kawalan Selesaiview
The control panel allows you to raise or lower the desk and save preferred height positions.
- Anak Panah Atas/Bawah (↑ / ↓): Press and hold to continuously adjust the desk height. Release to stop at the desired level.
- Pratetap Memori (1, 2, 3, 4): These buttons allow you to save and recall up to four custom height settings.
4.2. Menetapkan Pratetap Memori
- Laraskan meja mengikut ketinggian yang diingini menggunakan anak panah atas/bawah.
- Press the 'M' or 'Set' button (if available, or follow specific instructions for your panel) followed by one of the number buttons (1, 2, 3, or 4). The display may flash or beep to confirm the setting is saved.
- To recall a saved height, simply press the corresponding number button. The desk will automatically move to that preset height.
4.3. Dual Motor Operation
The E3 desk is equipped with dual motors, providing seamless and silent operation (under 50 dB). This design allows for a higher weight capacity and smoother transitions between sitting and standing positions.
4.4. Kapasiti Berat
The desk is engineered to support up to 220 paun (100 kg), providing a sturdy and reliable workstation for various tasks and equipment.
4.5. Sistem Anti-Perlanggaran
The desk is equipped with an anti-collision system that detects resistance during height adjustment. If an obstacle is encountered, the desk will automatically stop and reverse slightly to prevent damage or injury.
5. Penyelenggaraan
Penyelenggaraan yang kerap memastikan jangka hayat dan prestasi optimum meja berdiri anda.
- Pembersihan: Lap desktop dan bingkai dengan lembut, damp kain. Elakkan bahan kimia yang keras atau pembersih kasar yang boleh merosakkan kemasan.
- Pengurusan Kabel: Periodically check and organize cables to prevent tangles and ensure they do not interfere with the desk's movement.
- Pengikat: Periksa semua skru dan bolt sekali-sekala untuk memastikan ia ketat. Ketatkan semula jika perlu.
- Pemeriksaan Motor: Ensure the motor and electrical connections are free from dust and debris. Do not attempt to open the motor housing.
6. Penyelesaian masalah
If you encounter issues with your FLEXISPOT E3 desk, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Meja tidak bergerak atau bertindak balas terhadap kawalan. | Power cable disconnected, circuit breaker tripped, control panel malfunction. | Check all cable connections. Ensure the power outlet is functional. Try unplugging and replugging the desk after 30 seconds. |
| Meja bergerak tidak sekata atau mengeluarkan bunyi yang luar biasa. | Uneven load, loose fasteners, obstruction. | Ensure weight is evenly distributed. Check and tighten all assembly fasteners. Remove any obstructions. |
| Error codes displayed (e.g., ASR/E20). | Motor overload, sensor issue, or internal fault. | Unplug the desk for at least 10 minutes, then plug it back in. If the error persists, contact customer support. Avoid exceeding the weight limit. |
| Sistem anti-perlanggaran kerap dicetuskan. | Obstruction, sensitive setting. | Ensure there are no objects in the desk's path. Refer to the full manual for instructions on adjusting anti-collision sensitivity if available. |
Jika masalah berterusan selepas mencuba penyelesaian ini, sila hubungi khidmat pelanggan FLEXISPOT untuk bantuan lanjut.
7. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | FLEXISPOT |
| Model | E3 |
| Dimensi Produk | 55.1"D x 27.5"W x 27.6"H |
| warna | Bingkai Putih + Atasan Putih |
| Gaya | moden |
| Bahan Asas | logam |
| Jenis Bahan Atas | kayu |
| Jenis Selesai | kayu |
| Ciri Khas | Corded |
| Kemasan Perabot | putih |
| Saiz | 55"x28" Keseluruhan |
| Komponen yang Disertakan | Keyboard Tray, Monitor Arm (Note: Components may vary by package) |
| UPC | 840460427586 |
| Item Height (Adjustable Range) | 27.6 inches (Min) to 46.8 inches (Max) |
| Cadangan Berat Maksimum | 220 paun (100 kg) |
| Perhimpunan yang Diperlukan | ya |
| Jenis Motor | Motor Dwi |
| Tahap Kebisingan | Di bawah 50 dB |
8. Waranti dan Sokongan
FLEXISPOT provides comprehensive warranty coverage for your peace of mind:
- Perlindungan 5 Tahun: Digunakan pada rangka meja dan motor.
- Perlindungan 2 Tahun: Applies to the control panel and other electronics.
For any assistance, warranty claims, or technical support, please contact FLEXISPOT customer service. Refer to your purchase documentation or the official FLEXISPOT weblaman web untuk maklumat hubungan.
