Manual Pengguna Seeed Studio XIAO nRF52840 Sense (Pra-Pateri)

1. Pengenalan

This manual provides essential information for the proper use and operation of your Seeed Studio XIAO nRF52840 Sense (Pre-Soldered) microcontroller board. Please read this manual thoroughly before use to ensure optimal performance and longevity of the device.

The Seeed Studio XIAO nRF52840 Sense is a compact, versatile microcontroller board featuring the Nordic nRF52840 chip. It is designed for various applications, including embedded Machine Learning, wearable devices, and IoT projects, offering Bluetooth 5.0, BLE, and NFC capabilities, along with an onboard digital microphone and 6-axis IMU.

2. Ciri-ciri Utama

• Pengawal mikro: Nordic nRF52840 with FPU, operating up to 64 MHz.
• Kesambungan Tanpa Wayar: Bluetooth 5.0, BLE, and NFC with an onboard antenna.
• Penderia: Integrated digital microphone and 6-axis IMU (Inertial Measurement Unit).
• Pengurusan tenaga: Ultra-low power consumption (5 µA in deep sleep) and lithium battery charge management.
• Sokongan Pembangunan: Compatible with Arduino and CircuitPython.
• Reka bentuk padat: Thumb-sized form factor (21 x 17.5mm).

3. Panduan Persediaan

3.1 Kandungan Pakej

Verify that your package contains the Seeed Studio XIAO nRF52840 Sense (Pre-Soldered) board.

3.2 Sambungan Perkakasan

1. Sambung ke Komputer: Use a USB-C cable to connect the XIAO nRF52840 Sense to your computer. Ensure you use a reliable USB 2.0 port if encountering connection issues, as some USB 3.0 ports may cause DFU mode errors.
2. Bekalan Kuasa: The board can be powered via the USB-C port or an external lithium battery (JST connector). The board includes charge management for lithium batteries.

3.3 Software Setup (Arduino IDE)

1. Pasang Arduino IDE: Muat turun dan pasang Arduino IDE dari Arduino rasmi webtapak.
2. Add Board Support:
   • Buka Arduino IDE, pergi ke File > Keutamaan.
   • In "Additional Board Manager URLs", add the URL for Seeed Studio XIAO nRF52840 Sense board support. (Note: Specific URL can be found on Seeed Studio's official documentation.)
   • Pergi ke Tools > Board > Board Manager, search for "Seeed Studio nRF52 Boards" and install it.
3. Pilih Papan: Pergi ke Alatan > Papan and select "Seeed Studio XIAO nRF52840 Sense".
4. Pilih Port: Pergi ke Alatan > Pelabuhan and select the COM port associated with your XIAO board.

4. Arahan Operasi

4.1 Uploading Code

1. Write or Load Sketch: Buka bekasample sketch or write your own code in the Arduino IDE.
2. Verify Code: Klik butang "Sahkan" (ikon tanda semak) untuk menyusun kod anda dan menyemak ralat.
3. Kod Muat Naik: Click the "Upload" button (right arrow icon) to upload the compiled code to your XIAO nRF52840 Sense board.

4.2 Entering DFU Mode (Bootloader)

To upload new firmware or recover the board, you may need to enter DFU (Device Firmware Upgrade) mode:

• Locate the small reset button on the board.
• Double-click the reset button quickly. The onboard LED may change color or blink to indicate DFU mode.
• In DFU mode, a new drive (often labeled "D" or similar) and a COM port should appear on your computer.

4.3 Gambarajah Pinout

Refer to the pinout diagram for detailed information on the board's GPIOs, power pins, and peripheral interfaces.

5. Penyelenggaraan

• Pembersihan: Gunakan kain kering dan lembut untuk membersihkan papan. Elakkan menggunakan cecair atau pelarut.
• Storan: Store the board in an anti-static bag in a dry environment when not in use.
• Kemas kini Firmware: Regularly check the official Seeed Studio website for the latest firmware and board support package updates to ensure optimal performance and access to new features.

6. Penyelesaian masalah

• Board not recognized / "not in DFU mode" error:

  Try connecting the board to a USB 2.0 port instead of a USB 3.0 port. Some users have reported issues with USB 3.0 ports preventing proper DFU mode entry or recognition. Ensure you double-click the reset button to enter DFU mode.

• Upload failures:

  Verify that the correct board and COM port are selected in the Arduino IDE. Ensure the board is in DFU mode if required for the upload process. Check your USB cable for proper connection and functionality.

• Board becomes unresponsive or burns out:

  Ensure proper power supply. Avoid reverse polarity when connecting external batteries. If using a lithium battery, ensure correct JST cable connection. Over-current or incorrect wiring can damage the board. If issues persist, contact support.
• Difficulty finding resources or documentation:

  Refer to the official Seeed Studio documentation and community forums for comprehensive guides and support. Cari untuk "Seeed Studio XIAO nRF52840 Sense documentation" online.

7. Spesifikasi Teknikal

8. Maklumat Waranti

For warranty details and terms, please refer to the official Seeed Studio webtapak atau hubungi sokongan pelanggan mereka secara langsung. Simpan bukti pembelian anda untuk sebarang tuntutan waranti.

9. Sokongan dan Sumber

For further assistance, technical documentation, tutorials, and community forums, please visit the official Seeed Studio webtapak:

www.seeedstudio.com

You can also find additional resources and project examples on platforms like Hackaday, Hackster.io, and GitHub by searching for "Seeed Studio XIAO nRF52840 Sense".