Manual Pengguna Tempat Duduk Tandas Asas Geberit 300 dengan Penutup

1. Pengenalan

Thank you for choosing the Geberit 300 Basic Toilet Seat with Lid. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new toilet seat. Please read these instructions carefully before beginning installation and retain them for future reference.

Figure 1: Geberit 300 Basic Toilet Seat with Lid. This image shows the Geberit 300 Basic Toilet Seat with Lid in white, featuring its D-shaped design.

2. Maklumat Keselamatan

• Sentiasa pastikan mangkuk tandas bersih dan kering sebelum pemasangan.
• Do not use abrasive cleaners or harsh chemicals on the toilet seat, as this may damage the material.
• Avoid standing on the toilet seat or lid, as this can cause damage or injury.
• Jauhkan bahagian-bahagian kecil daripada capaian kanak-kanak semasa pemasangan.
• If any parts are missing or damaged, do not proceed with installation. Contact customer support.

3. Kandungan Pakej

Sila pastikan semua komponen ada sebelum memulakan pemasangan:

• Geberit 300 Basic Toilet Seat
• Geberit 300 Basic Toilet Lid
• Perkakasan Pemasangan (bolt, pencuci, nat)

4. Persediaan dan Pemasangan

Follow these steps to install your Geberit 300 Basic Toilet Seat:

1. Sediakan Mangkuk Tandas: Ensure the toilet bowl's mounting holes are clean and free of debris. If replacing an old seat, remove it completely.
2. Letakkan Perkakasan Pemasangan: Masukkan bolt melalui lubang pelekap pada mangkuk tandas.
3. Pasangkan Tempat Duduk: Place the toilet seat onto the bolts, aligning the seat's hinge points with the bolts.
4. Selamatkan Tempat Duduk: Dari bawah mangkuk tandas, letakkan pencuci pada bolt, diikuti dengan nat. Ketatkan nat dengan tangan terlebih dahulu.
5. Laraskan Penjajaran: Adjust the position of the seat to ensure it is centered and aligned with the toilet bowl.
6. Pengetatan Akhir: Once aligned, fully tighten the nuts. Do not overtighten, as this can damage the ceramic or the seat.

Refer to the diagrams below for product dimensions to ensure compatibility with your toilet bowl:

Rajah 2: Atas View Dimensions. A technical drawing illustrating the top-down view of the toilet seat, indicating a width of 370mm and a length of 445mm.

Rajah 3: Sisi View Dimensions. A technical drawing illustrating the side profile of the toilet seat, showing a height of approximately 5mm for the lid.

5. Arahan Operasi

The Geberit 300 Basic Toilet Seat is designed for straightforward use:

• To use the toilet, simply lift the lid and then the seat.
• After use, gently lower the seat and then the lid.

6. Penyelenggaraan dan Pembersihan

Proper maintenance ensures the longevity and hygiene of your toilet seat:

• Pembersihan tetap: Clean the toilet seat regularly with a mild soap solution and a soft cloth.
• Elakkan Bahan Kimia Keras: Do not use abrasive cleaners, scouring pads, or strong chemical detergents, as these can scratch or discolor the plastic surface.
• Pengeringan: Always dry the seat thoroughly after cleaning to prevent water spots and maintain hygiene.
• Penjagaan Engsel: Periodically check the hinge connections for tightness. If the seat feels loose, gently retighten the mounting nuts.

7. Penyelesaian masalah

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information or technical support, please refer to the official Geberit website or contact your local Geberit dealer. Please have your model number (S8H51203000G) available when contacting support.

Pengeluar: Geberit

Tarikh Ketersediaan di Amazon.com.be: 8 November 2021