STRICH SKT-02 Z-Style Piano Keyboard Stand Instruction Manual

1. Pengenalan

Thank you for choosing the STRICH SKT-02 Z-Style Piano Keyboard Stand. This heavy-duty, adjustable, and portable stand is designed to provide stable support for 54, 61, and 88-key electric pianos and keyboards. Please read this manual carefully before assembly and use to ensure proper setup and safe operation.

2. Maklumat Keselamatan

• Pastikan semua komponen dipasang dengan kukuh sebelum meletakkan sebarang instrumen di atas penyangga.
• Jangan melebihi kapasiti berat maksimum 250 lbs (113.4 kg).
• Always loosen adjustment knobs before attempting to change the stand's height or width to prevent damage or injury.
• Use the provided safety straps and keyboard clamps to secure your instrument firmly to the stand.
• If using wheels, ensure they are locked when the instrument is in use to prevent accidental movement.
• Jauhkan bahagian kecil daripada kanak-kanak untuk mengelakkan bahaya tercekik.

3. Kandungan Pakej

Sahkan bahawa semua bahagian ada sebelum memulakan pemasangan:

• Komponen utama Z-frame
• Palang boleh laras
• 4 x Adjustable keyboard clamps
• Sponge padding for contact surfaces
• 2 x Safety straps
• Built-in headphone hook
• 4 x Non-slip foot pads
• 4 x Lockable wheels
• Assembly hardware (knobs, screws)

4. Persediaan dan Pemasangan

Follow these steps to assemble your STRICH SKT-02 keyboard stand:

1. Unfold the Z-Frame: Carefully unfold the main Z-frame components. Ensure they are stable on a flat surface.
2. Attach Foot Pads or Wheels: Decide whether to use the non-slip foot pads or the lockable wheels. Screw them into the bottom of the stand's legs. If using wheels, ensure they are locked after installation for stability.

   

3. Pasang palang: Attach the adjustable crossbar between the two Z-frame sections. Loosen the knobs on the crossbar, slide it into position, and then tighten the knobs to secure it. This allows for width adjustment.

4. Laraskan Ketinggian: Loosen the pull-type knobs on the vertical sections of the Z-frame. Adjust the height to your desired playing position (seated or standing) and then firmly tighten the knobs.

   

5. Attach Keyboard Clamps and Padding: Install the four adjustable keyboard clamps onto the top support bars. Apply the sponge padding to the contact surfaces of the clamps to protect your instrument.

   

6. Pasang Tali Keselamatan: Secure the two safety straps to the stand and around your keyboard. These straps provide additional 360° protection against accidental dislodgement.

   

7. Pasang Cangkuk Fon Kepala: The built-in headphone hook can be attached to either side of the stand for convenient storage.

   

8. Semakan Akhir: Double-check all connections and adjustments to ensure the stand is stable and your instrument is securely mounted.

5. Arahan Operasi

5.1 Melaraskan Ketinggian dan Lebar

The STRICH SKT-02 stand features a slide-and-lock mechanism for easy adjustments:

• Untuk melaraskan ketinggian, loosen the pull-type knobs on the vertical posts of the Z-frame. Slide the posts up or down to the desired height, then firmly tighten the knobs.
• Untuk melaraskan lebar, loosen the knobs on the horizontal crossbar. Slide the two main Z-frame sections closer or further apart to achieve the desired width for your keyboard, then firmly tighten the knobs.

Note: Always ensure all knobs are securely tightened after making any adjustments to maintain stability.

5.2 Securing Your Instrument

Utilize the enhanced safety features for maximum instrument protection:

• Position your keyboard on the stand, ensuring it rests evenly on the padded clamps.
• Adjust the 4 keyboard clamps to snugly fit the sides of your instrument.
• Fasten the 2 safety straps around your keyboard and the stand's frame, ensuring they are taut but not overly tight to avoid damaging the instrument.

6. Penyelenggaraan

• Regularly inspect all screws, knobs, and connections for tightness. Tighten as needed.
• Clean the stand with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
• Check the condition of the sponge padding and safety straps periodically. Replace if worn or damaged.
• Store the stand in a dry environment when not in use.

7. Penyelesaian masalah

7.1 Pendirian Goyah

• Ensure all adjustment knobs (height and width) are fully tightened.
• Verify that the stand is on a flat, level surface. Adjust the individual foot pads if necessary to compensate for uneven floors.
• If using wheels, ensure all four wheels are locked.

7.2 Keyboard Slides on Stand

• Confirm that the keyboard clamps are properly adjusted and snugly fit the instrument.
• Check that the sponge padding on the clamps is intact and providing sufficient grip.
• Ensure the safety straps are correctly installed and tightened around the keyboard.

8. Spesifikasi

9. Waranti dan Sokongan

STRICH stands by its products. If you encounter any issues or require assistance, please contact our dedicated customer service team for prompt and professional support. Refer to your purchase documentation for specific warranty details.