HITBOX HBM145 Multi-Process Welder User Manual

1. Produk Lebihview

The HITBOX HBM145 is a versatile 4-in-1 multi-process inverter welder designed for various welding applications. It supports Gasless MIG, Lift TIG, MMA (Stick), and Spool Gun welding modes, offering flexibility for both beginners and experienced users. The machine features synergic control for simplified operation and robust safety mechanisms.

Ciri-ciri Utama:

• Multi-Process Capability: Supports Gasless MIG, Lift TIG, MMA, and Spool Gun welding.
• Output Tinggi: Sehingga 145 Amp output, suitable for welding mild steel up to 0.315 inches (8mm) thick.
• Kawalan Sinergik: Vol. Automatiktage matching with wire feeding speed for ease of use.
• Dwi Voltage: Beroperasi pada kedua-dua bekalan kuasa 110V dan 220V.
• Keselamatan Lanjutan: Equipped with IGBT technology for automatic voltage fluctuation compensation, overcurrent protection, overload protection, and overheating protection.
• Reka Bentuk Mudah Alih: Padat dan ringan untuk pengangkutan dan penyimpanan yang mudah.

2. Maklumat Keselamatan Penting

Sentiasa mengutamakan keselamatan semasa mengendalikan peralatan kimpalan. Kegagalan mematuhi garis panduan keselamatan boleh mengakibatkan kecederaan serius atau kematian.

Langkah Keselamatan Am:

• Kejutan elektrik: Welding current can cause fatal electric shock. Ensure proper grounding. Do not touch live electrical parts. Wear dry welding gloves and protective clothing.
• Asap dan Gas: Welding fumes and gases can be hazardous to your health. Work in a well-ventilated area. Use a fume extractor if necessary.
• Sinar Arka: Arc rays can burn eyes and skin. Wear a welding helmet with appropriate shade filter, safety glasses, and protective clothing.
• Kebakaran dan Letupan: Percikan api kimpalan dan logam panas boleh menyebabkan kebakaran atau letupan. Jauhkan bahan mudah terbakar dari kawasan kimpalan. Sediakan alat pemadam api yang sedia ada.
• Bahagian Panas: Welded materials and equipment can remain hot for a long time. Allow them to cool before handling.
• Perentak jantung: Magnetic fields from high currents can affect pacemakers. Consult your doctor before welding.

Image: Internal components of the HBM145 welder highlighting its integrated safety features including overvoltage, perlindungan arus lampau, pemanasan melampau dan perlindungan beban lampau.

3. Komponen dan Aksesori Produk

The HITBOX HBM145 welder comes with essential accessories to get you started. Please inspect all items upon unpacking.

Image: The HITBOX HBM145 welder displayed with its standard accessories. These include the 14AK MIG Gun (7.9 ft), Electrode Holder (4.9 ft), Earth Clamp (4.9 ft), Flux Core Wire (1 lbs, .030"), 110/220V Adapter Plug, Hammer, Nozzle, Welding Rods (2.0mm*5), Conductive Nozzles (0.8mm*3, 1.0mm*2), and the User Manual.

Item Termasuk:

1. 14AK MIG Gun (7.9 ft)
2. Electrode Holder (4.9 ft)
3. Bumi Clamp (4.9 kaki)
4. Flux Core Wire (1 lbs, .030")
5. 110/220V Adapter Plug
6. tukul
7. muncung
8. Welding Rods (2.0mm*5)
9. Conductive Nozzles (0.8mm*3, 1.0mm*2)
10. Manual Pengguna

Note: Lift TIG torch and Spool Gun are not included and must be purchased separately if those welding processes are desired.

4. Arahan Persediaan

4.1 Sambungan Kuasa

• The HBM145 supports both 110V and 220V power inputs. Use the provided adapter plug for the appropriate voltage.
• Ensure the power source is stable and capable of supplying the required current (up to 145A).
• Connect the power cable securely to the welder and a grounded electrical outlet.

4.2 Wire Feeding System (MIG/Flux Core)

The welder features a reliable wire feed system for consistent performance.

Image: The wire feeding mechanism of the HBM145, demonstrating how to load a 2 lbs spool of .030" or .039" welding wire for consistent feeding.

1. Buka petak suapan wayar.
2. Place the wire spool onto the spindle, ensuring it rotates freely. The HBM145 is suitable for 2 LBS .030'' & .039'' flux core wire.
3. Thread the wire through the guide tube and feed roller.
4. Close the pressure arm on the feed roller to apply appropriate tension.
5. Feed the wire through the MIG gun liner until it emerges from the nozzle.

4.3 Menyambungkan Kabel Kimpalan

• Bumi Clamp: Sambung bumi clamp cable to the positive (+) terminal for flux core welding or negative (-) terminal for solid wire MIG (if using gas). Attach the clamp securely to the workpiece, ensuring good electrical contact.
• Obor MIG: Connect the MIG torch cable to the appropriate terminal (usually negative (-) for flux core, positive (+) for solid wire MIG).
• Electrode Holder (MMA): For MMA welding, connect the electrode holder to the positive (+) terminal and the earth clamp ke terminal negatif (-).
• Lift TIG Torch (Optional): If using a Lift TIG torch (purchased separately), connect it to the negative (-) terminal and the earth clamp ke terminal positif (+).

Important Polarity Note: For flux core welding, set the wire to negative polarity and the return clip (earth clamp) to positive polarity. This is the opposite of gas-shielded welding and helps minimize splatter.

5. Operating the Welder

The HBM145 offers multiple welding processes. Familiarize yourself with the control panel and settings for each mode.

Image: The large LED digital display of the HBM145, illustrating the synergic control interface. It shows settings for flux core wire diameter (0.8mm and 1.0mm), current (145A), and features like Hot Start, Arc Force, and Antisticking.

5.1 Panel Kawalan Selesaiview

The large LED digital display provides clear feedback on welding parameters. Use the control knob and mode button to navigate and adjust settings.

• Butang Mod: Cycles through welding processes (MIG, TIG, MMA).
• Tombol kawalan: Melaraskan amperage, wire feed speed, and other parameters depending on the selected mode.
• Kawalan Sinergik: In MIG mode, adjusting the wire feeding speed automatically matches the voltage for optimal welding.

5.2 Mod Kimpalan

Image: Visual representation of the four welding processes supported by the HBM145: Gasless MIG, MMA (Stick), Lift TIG (requires separate WP17V TIG Torch), and Spool Gun (requires extra purchase).

5.2.1 Gasless MIG Welding

• Pilih mod MIG pada panel kawalan.
• Ensure correct polarity for flux core wire (negative wire, positive earth clamp).
• Select the appropriate wire size (e.g., 0.030" or 0.039").
• Adjust wire feed speed using the synergic control. The voltage will automatically adjust.
• Begin welding, maintaining a consistent travel speed and arc length.

5.2.2 Kimpalan MMA (Stik).

• Pilih mod MMA.
• Sambungkan pemegang elektrod ke terminal positif (+) dan penutup bumiamp ke terminal negatif (-).
• Insert the welding electrode into the holder.
• Laraskan amperage according to the electrode type and material thickness.
• The machine features Hot Start for easier arc ignition and Anti-sticking to prevent electrodes from sticking.

5.2.3 Lift TIG Welding (Optional)

• Requires a separate Lift TIG torch (e.g., WP17V).
• Pilih mod TIG.
• Connect the TIG torch to the negative (-) terminal and the earth clamp ke terminal positif (+).
• Laraskan amppemadam.
• Initiate the arc by gently touching the tungsten electrode to the workpiece and lifting slightly.

5.2.4 Spool Gun Welding (Optional)

• Requires a separate spool gun.
• Connect the spool gun to the designated port on the welder.
• This mode is primarily for gasless welding and offers rapid wire feeding capabilities and improved arc stability.

6. Penyelenggaraan

Penyelenggaraan tetap memastikan jangka hayat dan prestasi optimum mesin kimpalan anda.

Penyelenggaraan Umum:

• Pembersihan: Periodically clean the welder's exterior with a dry cloth. Use compressed air to blow out dust from inside the machine, especially the cooling fan and vents. Ensure the power is disconnected before cleaning.
• Pemeriksaan Kabel: Periksa semua kabel kimpalan, lampu suluh dan penutup bumi secara berkalaamp untuk kerosakan, potongan atau sambungan yang longgar. Gantikan komponen yang rosak dengan segera.
• Sistem Suapan Kawat: Clean the wire feed rollers and guide tubes to prevent wire jamming or inconsistent feeding. Check for wear on the feed rollers.
• MIG Torch Nozzle/Tips: Clean or replace MIG nozzles and contact tips as they wear out or become clogged with spatter.
• Storan: Simpan pengimpal dalam persekitaran yang kering dan bersih dari habuk dan kelembapan yang berlebihan.

Image: The HBM145 features a waterproof power switch, designed to prevent water and dust ingress, extend welder lifespan, ensure stable operation in high temperatures, and make it suitable for outdoor welding.

7. Penyelesaian masalah

Bahagian ini menyediakan penyelesaian kepada isu biasa yang mungkin anda hadapi.

8. Spesifikasi Teknikal

Detailed specifications for the HITBOX HBM145 Mig Welder.

Image: The HBM145 welder demonstrating its ultra-portable and lightweight design, with dimensions of 13.7" x 9.6" x 6.4" and a weight of 9.63 lbs, making it easy to carry.

9. Waranti dan Sokongan

Maklumat Waranti:

HITBOX provides a Waranti 5 tahun on this welding product. This warranty covers manufacturing defects and ensures reliable operation under normal use conditions.

Sokongan Pelanggan:

For any quality problems, technical assistance, or inquiries regarding your HITBOX HBM145 welder, please contact HITBOX customer service. We are committed to arranging an immediate replacement or a 100% refund for eligible issues.

Please refer to the contact information provided in your product packaging or visit the official HITBOX webtapak untuk butiran sokongan.