NZXT H9 Flow RGB+ (2025) PC Case Instruction Manual

1. Pengenalan

This manual provides detailed instructions for the assembly, operation, and maintenance of your NZXT H9 Flow RGB+ (2025) PC case. The H9 Flow RGB+ is a large dual-chamber ATX mid-tower case designed for high-performance builds, emphasizing optimal airflow and aesthetics. It features a dual-chamber design for improved cooling and cable management, perforated panels, angled fans, and extensive support for fans and radiators.

Rajah 1: Depan-kiri view of the NZXT H9 Flow RGB+ (2025) PC Case, showcasing its illuminated RGB fans and panoramic glass panels.

2. Ciri-ciri Utama

• Dual-Chamber Design: Separates main components from the PSU and drives for improved thermal performance and cable management.
• Aliran Udara Dioptimumkan: Perforated steel panels and angled front-right fans ensure efficient cooling for high-performance builds.
• RGB Ready: Includes two F420 RGB Core single-frame fans, one F120 RGB Core (CV) fan in the rear, and an NZXT Control Hub. CV = Case Version (3-pin DC).
• Ten-Fan Capacity: Supports up to nine 140mm fans across the top, front-right, and bottom, plus one 120mm fan in the rear.
• Panoramik View: Showcase every detail of your build with seamless, wraparound tempered glass paneling.
• Large Radiators & GPUs: Fits up to a 420mm radiator on the top and front-right, with plenty of clearance for high-end graphics cards (up to 435mm GPU length).
• Pengurusan Kabel Mudah: Extra-wide channels, built-in Velcro straps, and tie-down points make cable routing effortless.
• Back-Connect Ready: Compatible with rear-connecting motherboards like ASUS BTF and MSI Project Zero for a cable-free look.

Figure 2: Visual representation of the dual-chamber design, highlighting the separation of heat-generating components and optimized airflow.

Figure 3: The panoramic tempered glass paneling offers an unobstructed view daripada komponen dalaman.

3. Persediaan dan Pemasangan

Follow these steps for proper installation of your PC components within the NZXT H9 Flow RGB+ case.

3.1. Menyediakan Kes

1. Carefully remove the tempered glass panels by unscrewing the thumb screws and gently sliding them off.
2. Identify the various mounting points for fans, radiators, and storage drives.

3.2. Pemasangan Kipas dan Radiator

The case supports extensive cooling configurations. Refer to the diagram below for fan and radiator placement options.

Figure 4: Expansive cooling options with support for up to ten fans and 420mm radiators.

• Install fans and radiators in desired locations (top, front-right, bottom, rear) using the provided screws.
• The case includes two F420 RGB Core single-frame fans and one F120 RGB Core (CV) fan. Connect them to the NZXT Control Hub.

3.3. Pemasangan Papan Induk dan GPU

• Install your ATX motherboard onto the standoffs. The case is compatible with back-connect motherboards for a cleaner aesthetic.
• Install your graphics card. The case offers ample clearance for large GPUs (up to 435mm).

Figure 5: The case supports large graphics cards up to 435mm in length.

3.4. Pengurusan Kabel

Utilize the extra-wide channels, built-in Velcro straps, and tie-down points in the dual-chamber design for effortless cable routing.

Figure 6: Dedicated cable management features simplify the building process and improve airflow.

3.5. Video Guides

Watch these videos for visual guidance on building with the NZXT H9 Flow RGB+ case.

4. Arahan Operasi

Sebaik sahaja semua komponen dipasang dan disambungkan, anda boleh menghidupkan sistem anda.

4.1. Hidupkan/Mati Kuasa

• Press the power button located on the front I/O panel to turn on your PC.
• To power off, use the operating system's shutdown function or press and hold the power button for several seconds.

4.2. RGB Lighting and Fan Control

The included NZXT Control Hub manages the RGB lighting and fan speeds. For advanced customization, download and install the NZXT CAM software.

5. Penyelenggaraan

Regular maintenance ensures optimal performance and longevity of your PC components.

5.1. Pembersihan Penapis Habuk

• The case features removable dust filters (e.g., at the bottom). Regularly check and clean these filters to prevent dust buildup and maintain airflow.
• Gently slide out the filters, clean them with compressed air or water (ensure they are completely dry before reinstallation), and reinsert.

5.2. Pembersihan Am

• Use a soft, lint-free cloth to clean the tempered glass panels and exterior surfaces. Avoid abrasive cleaners.
• For internal components, use compressed air to remove dust buildup periodically. Ensure the PC is powered off and unplugged before cleaning.

6. Penyelesaian masalah

If you encounter issues, refer to these common troubleshooting tips.

• Tiada Kuasa: Ensure all power cables (PSU, motherboard, GPU) are securely connected. Check the power outlet and PSU switch.
• Fans Not Spinning/RGB Not Lighting: Verify fan and RGB cables are correctly connected to the NZXT Control Hub and the hub is powered. Check NZXT CAM software settings.
• Terlalu panas: Ensure all fans are spinning correctly and in the proper orientation for airflow. Clean dust filters. Verify CPU cooler and GPU are properly seated.
• Isu Paparan: Confirm the display cable is securely connected to the graphics card and monitor.
• For further assistance, consult your motherboard manual or the NZXT support webtapak.

7. Spesifikasi

Detailed technical specifications for the NZXT H9 Flow RGB+ (2025) PC Case.

Figure 7: Case dimensions for planning your build space.

8. Waranti dan Sokongan

For warranty information, technical support, or to register your product, please visit the official NZXT webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan bukti pembelian anda untuk tuntutan waranti.

Official NZXT Webtapak: www.nzxt.com