Two trees TTS-10 Pro Laser Engraver User Manual

1. Pengenalan

Thank you for choosing the Two trees TTS-10 Pro Laser Engraver. This device utilizes advanced laser technology for precise engraving and cutting on a variety of materials. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your engraver.

Figure 1.1: Assembled Two trees TTS-10 Pro Laser Engraver.

2. Maklumat Keselamatan

Operating a laser engraver involves inherent risks. Adhere to the following safety guidelines to prevent injury and damage to the equipment:

• Perlindungan Mata: Always wear certified laser safety goggles when the laser is active. The TTS-10 Pro includes a red circular laser shield, but additional eye protection is mandatory.
• Pengudaraan: Ensure adequate ventilation in the work area. Laser engraving and cutting can produce fumes and particles that may be harmful if inhaled.
• Bahaya Kebakaran: Laser processing can ignite flammable materials. Never leave the engraver unattended during operation. Keep a fire extinguisher nearby.
• Keserasian Bahan: Hanya bahan ukiran atau potong yang dinyatakan selamat untuk pemprosesan laser. Elakkan bahan yang menghasilkan asap toksik atau sangat memantulkan cahaya.
• Kanak-kanak dan Haiwan Kesayangan: Jauhkan kanak-kanak dan haiwan peliharaan dari kawasan operasi.
• Keselamatan Elektrik: Ensure the power supply is stable and correctly grounded. Do not operate with wet hands or in damp persekitaran.
• Hentian kecemasan: Familiarize yourself with the location of the emergency stop button (if present) or the power switch to quickly shut down the machine in an emergency.

Figure 2.1: Laser module with safety warnings and a power meter indicating 5.5W optical output.

3. Ciri-ciri Produk

The TTS-10 Pro Laser Engraver is designed with advanced features for high-precision engraving and efficient cutting:

• Advanced Laser Technology: Utilizes LD+FAC+C-Lens compression spot technology for a fine laser spot as small as 0.08mm, enabling delicate and high-precision engraving.
• Fixed Focus Laser Module: The laser module has a fixed focal length of 23mm, providing superior engraving and cutting capabilities compared to long-focus lasers.
• Prestasi Kuat: Features an 80W machine power with a 5.5W optical output laser module, capable of cutting materials up to 5mm thick.
• Keserasian Bahan Luas: Capable of engraving and cutting various materials including wood, plastic, paper, leather, bamboo, sponge paper, alumina, stainless steel, Chevron board, and acrylic.
• Muncung Bantuan Udara: Includes a metal air assist nozzle for improved cutting performance and cleaner edges.
• Circular Laser Shield: Equipped with a red circular laser shield for enhanced safety during operation.
• Pelbagai Pilihan Kesambungan: Supports WiFi, USB, and mobile app (MKSLaser) connections for flexible control. Offline use is also supported.
• Keserasian Perisian: Compatible with popular engraving software such as LaserGRBL (Windows), Lightburn (Windows, Mac), and MKSLaser (Android/iOS app).
• Pembinaan Tahan Lama: Features an all-aluminum alloy body for stability and longevity.
• 32-bit Motherboard: Ensures fast and efficient processing of engraving tasks.

Rajah 3.1: Perwakilan visual ciri produk utama.

4. Kandungan Pakej

Upon unboxing, verify that all components are present. The package typically includes:

• TTS-10 Pro Laser Engraver Frame Assembly
• Laser Module (TTS-55 Pro Diode Laser Module)
• Penyesuai Kuasa dan Kabel
• Kabel USB
• Gogal Keselamatan
• Air Assist Nozzle and Tubing
• Small Tool Kit for Assembly
• Manual Pengguna (dokumen ini)
• Test Materials (e.g., small wood piece)

Note: The product description states "NO INCLUYE LA PLACA BASE" (DOES NOT INCLUDE THE BASE PLATE). This refers to an optional base plate for the working area, not the machine's motherboard.

5. Panduan Persediaan

5.1 Perhimpunan

The TTS-10 Pro is designed for easy assembly. Follow the included quick start guide or assembly video (if provided) for detailed steps. Ensure all screws are tightened securely for stability.

5.2 Pemasangan Perisian

Choose your preferred software for operating the engraver:

• LaserGRBL: Free software for Windows. Download from the official LaserGRBL webtapak.
• Lightburn: Paid software compatible with Windows and Mac. Download from the official Lightburn webtapak.
• MKSLaser App: Mobile application for Android and iOS devices. Cari untuk "MKSLaser" in your device's app store.

Install the necessary drivers if prompted by the software or operating system.

5.3 Ketersambungan

The engraver offers multiple connection methods:

• Sambungan USB: Connect the engraver to your computer using the provided USB cable.
• Sambungan WiFi: Follow the software's instructions to connect the engraver to your local WiFi network. This allows for wireless control.
• Kawalan Apl: Use the MKSLaser app on your mobile device to connect and control the engraver via Bluetooth or WiFi.
• Penggunaan Luar Talian: The engraver supports offline operation, allowing you to load designs via an SD card (if applicable) and run jobs without a continuous computer connection.

Figure 5.1: Various connectivity options for the TTS-10 Pro.

5.4 Memfokuskan Laser

The TTS-10 Pro features a fixed-focus laser module with a focal length of 23mm. To adjust the laser height for optimal focus:

1. Place your material on the working surface.
2. Use the spiral button on the laser module to raise or lower the module until the bottom of the laser module is approximately 23mm from the surface of your material.
3. Some models may include a focus gauge or a multi-scale positioning column to assist with precise height adjustment.

Figure 5.2: Spiral button for convenient height adjustment and multi-scale positioning column.

5.5 Air Assist Setup

For enhanced cutting performance and to reduce charring, connect the air assist tubing to the metal nozzle on the laser module and to an external air pump (not included, unless specified in package contents). Ensure the air flow is directed at the laser's focal point.

6. Arahan Operasi

6.1 Menyediakan Reka Bentuk Anda

Create or import your design using your chosen software (LaserGRBL, Lightburn, or MKSLaser). Adjust parameters such as power, speed, and number of passes according to the material and desired effect. Refer to the software's documentation for detailed instructions on design preparation.

Gambar 6.1: Cthamples of creative displays and materials suitable for engraving and cutting.

6.2 Loading Material

Place the material securely on the working surface. Ensure it is flat and does not obstruct the laser's path or the movement of the gantry.

6.3 Starting the Engraving/Cutting Process

1. Ensure all safety precautions are in place, including wearing safety goggles and ensuring proper ventilation.
2. Power on the engraver.
3. In your software, home the laser (if applicable) and set the origin point for your job.
4. Mulakan proses ukiran atau pemotongan daripada perisian.
5. Monitor the process closely for any issues, such as material ignition or unexpected behavior.

6.4 High-Precision Engraving

The TTS-10 Pro's laser source, guided by LD+FAC+C-Lens technology, produces a spot as small as 0.08mm. This allows for highly detailed and delicate engraving works, capturing intricate designs with precision.

Gambar 6.2: Cthample of high-precision engraving detail.

7. Penyelenggaraan

Penyelenggaraan berkala memastikan jangka hayat dan prestasi optimum pengukir laser anda:

• Bersihkan Kanta Laser: Periodically clean the laser lens with a lint-free cloth and lens cleaning solution to maintain laser beam quality.
• Clean the Work Area: Remove debris and dust from the working surface and around the machine after each use.
• Inspect Belts and Rails: Check the tension of the timing belts and ensure the linear rails are clean and free of obstructions. Lubricate rails if recommended by the manufacturer.
• Kemas kini Firmware: Semak pengeluar website for any available firmware updates for the engraver's motherboard.

8. Penyelesaian masalah

Bahagian ini menangani isu biasa yang mungkin anda hadapi:

9. Spesifikasi

Rajah 9.1: Dimensi produk.

10. Waranti dan Sokongan

Untuk maklumat jaminan dan sokongan teknikal, sila rujuk dokumentasi yang disediakan bersama pembelian anda atau hubungi penjual secara langsung. Simpan resit pembelian anda sebagai bukti pembelian.

For general inquiries or further assistance, you may also visit the official Two trees website or relevant online communities for laser engravers.