Maxxima 2-inci 5 CCT Boleh Laras Slim Tanpa Trim Ceruk LED Bola Mata Gimbal Downlight Manual Pengguna

1. Pengenalan

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Maxxima 2-inch 5 CCT Adjustable Slim Trimless Recessed LED Eyeball Gimbal Downlight. Please read this manual thoroughly before installation and retain it for future reference.

Imej 1.1: Depan view of the Maxxima 2-inch Slim Trimless Recessed LED Eyeball Gimbal Downlight, showing the integrated LED and the trimless plaster frame.

2. Maklumat Keselamatan

AMARAN: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.

• Pastikan bekalan voltage ialah 120V AC.
• Jangan cuba mengubah suai lekapan.
• Sesuai untuk damp dan lokasi basah.
• IC Dinilai untuk sentuhan langsung dengan penebat.
• Sentiasa pakai cermin mata dan sarung tangan keselamatan semasa pemasangan.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• Maxxima 2-inch Slim Trimless Recessed LED Eyeball Gimbal Downlight (Integrated LED)
• Junction Box (Power Supply)
• Manual Pemasangan (dokumen ini)

Image 3.1: The recessed LED downlight connected to its power supply junction box.

4. Spesifikasi

5. Arahan Pemasangan

This trimless recessed downlight is designed for new construction or remodel applications where a clean, flush finish is desired. No traditional recessed can or housing is required.

1. Sediakan Pembukaan: Cut a 2.6-inch diameter hole in the ceiling at the desired location. Ensure there is sufficient clearance above the ceiling for the fixture and junction box.
2. Install the Plaster Frame: Insert the trimless plaster frame into the cutout. Secure the frame to the sheetrock using appropriate screws. The frame should be flush with the ceiling surface.
3. Plaster and Paint: Apply plaster over the trimless frame, blending it seamlessly with the ceiling. Allow to dry, then sand and paint the ceiling as desired. This creates the "trimless" effect.
4. Wiring the Junction Box:
   • Matikan kuasa pada pemutus litar.
   • Buka penutup kotak simpang.
   • Remove the appropriate knockout(s) on the junction box.
   • Connect the supply wires to the junction box wires: Black to Black (Live), White to White (Neutral), Green/Bare Copper to Green (Ground). Secure connections with wire nuts.
   • Close the junction box cover and secure it.
5. Connect Fixture to Junction Box: Feed the junction box through the plaster frame opening. Connect the fixture's male connector to the female connector on the junction box. Ensure a secure connection.
6. Insert and Secure Fixture: Carefully push the LED downlight fixture into the plaster frame opening. Twist the fixture clockwise to engage the twist locks and secure it firmly into the frame.

Image 5.1: Diagram illustrating the frameless recessed design and how to screw the plaster frame to the sheetrock before plastering.

Image 5.2: Illustration of how to push up and twist the integrated LED fixture to unlock it from the hidden trim, demonstrating the twist-lock mechanism.

6. Arahan Operasi

Once installed, the Maxxima LED Downlight offers versatile lighting control.

6.1 Pemilihan Suhu Warna (CCT)

The fixture features 5 selectable color temperatures. Before final installation of the fixture into the ceiling, locate the CCT selection switch on the back of the provided junction box. Use this switch to choose your preferred light color:

• 2700K: Putih Lembut
• 3000K: Putih Hangat
• 3500K: Putih Cerah
• 4000K: Putih Neutral
• 5000K: siang hari

Image 6.1: Close-up of the 5 CCT selection switch located on the junction box, allowing users to choose between different color temperatures.

Image 6.2: Visual representation of the five selectable color temperatures (2700K, 3000K, 3500K, 4000K, 5000K) and their corresponding light appearances.

6.2 Fungsi Pemalapan

This downlight is dimmable from 10% to 100%. Ensure you use a compatible LED dimmer switch for optimal performance. Refer to your dimmer switch's instructions for proper operation.

6.3 Melaraskan Arah Cahaya

The eyeball gimbal design allows for precise light direction. The fixture can rotate 360 degrees and tilt up to 30 degrees (15 degrees to each side). Gently adjust the inner light module to direct the light as needed.

Image 6.3: Diagram illustrating the 360-degree rotation and 30-degree tilt capability (15 degrees on each side) of the eyeball gimbal downlight.

7. Penyelenggaraan

The Maxxima LED Downlight requires minimal maintenance.

• Pembersihan: Pastikan kuasa dimatikan sebelum membersihkan. Lapkan lekapan dengan lembut, kering atau sedikit damp kain. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
• Panjang Umur LED: The integrated LED is designed for 50,000 hours of operation and does not require bulb replacement.

8. Penyelesaian masalah

Jika anda mengalami masalah dengan downlight anda, rujuk masalah dan penyelesaian biasa berikut:

If troubleshooting steps do not resolve the issue, contact Maxxima customer support.

9. Waranti dan Sokongan

This Maxxima LED Downlight is backed by a Waranti 3 tahun dari tarikh pembelian. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa.

For warranty claims or technical support, please contact Maxxima customer service. Keep your proof of purchase for warranty validation.

Pelan perlindungan tambahan mungkin tersedia untuk pembelian:

• Pelan Perlindungan 3 Tahun
• Pelan Perlindungan 4 Tahun
• Complete Protect (monthly plan covering multiple purchases)

Untuk maklumat lanjut, lawati Kedai Maxxima di Amazon.