1. Pengenalan
This manual provides instructions for the safe and proper installation, operation, and maintenance of your suptek Single Monitor Mount MD01AW. Please read this manual thoroughly before installation and keep it for future reference.
The suptek MD01AW is a single monitor desk mount featuring a gas spring arm for smooth and effortless adjustments. It is designed to enhance your ergonomic workspace by allowing flexible positioning of your monitor.
Keserasian
- Saiz Skrin: 13 hingga 32 inci
- Kapasiti Berat: 4.4 hingga 19.8 lbs (2 hingga 9 kg)
- Keserasian VESA: 75x75mm dan 100x100mm
Figure 1: suptek Single Monitor Mount MD01AW with a monitor. This image illustrates the product's load capacity (2-9kg), screen size compatibility (13"-32"), and VESA pattern (75x75/100x100mm).
2. Kandungan Pakej
Please verify that all parts are present and undamaged before installation. If any parts are missing or damaged, contact suptek customer support.
- Perhimpunan Lengan Monitor
- Meja Clamp Pangkalan
- Grommet Mount Base (optional)
- Plat VESA
- Kit Perkakasan (skru, pencuci, spacer)
- Kekunci Allen
- Manual Arahan
3. Maklumat Keselamatan
AMARAN: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty.
- Jangan melebihi kapasiti berat maksimum 19.8 lbs (9 kg).
- Ensure your desk surface is strong enough to support the combined weight of the mount and your monitor.
- Use only the provided hardware. If you are unsure about any part of the installation, consult a qualified professional.
- Jauhkan kanak-kanak dan haiwan peliharaan semasa pemasangan.
- Periksa semua skru dan sambungan secara berkala untuk memastikan ia kekal kukuh.
4. Persediaan dan Pemasangan
The suptek MD01AW offers two installation methods: C-clamp dan pelekap Grommet.
Figure 2: Two installation options for the monitor mount. The C-clamp option is suitable for desk thicknesses of 10-70mm, and the grommet mount option is for desk thicknesses of 10-70mm with a hole diameter of 10-60mm.
4.1 C-Clamp Pemasangan
- Pasangkan C-clamp base to the edge of your desk. Ensure the clamp is securely tightened to prevent movement. The C-clamp fits desks with a thickness of 10-70mm.
- Insert the main pole of the monitor arm into the C-clamp base. Tighten the securing screw.
4.2 Pemasangan Grommet
- If your desk has a grommet hole (10-60mm diameter) and a thickness of 10-70mm, use the grommet mount option.
- Thread the grommet base through the desk hole. Secure it from underneath the desk using the provided plate and nut.
- Insert the main pole of the monitor arm into the grommet base. Tighten the securing screw.
4.3 Memasang Monitor
- Attach the VESA plate to the back of your monitor using the appropriate screws and spacers from the hardware kit. Ensure the screws are tightened securely but do not overtighten.
- Slide the monitor (with the attached VESA plate) onto the VESA head of the monitor arm. Ensure it clicks into place or is secured with the locking screw.
Figure 3: Monitor attached to the suptek monitor arm. This image demonstrates how the mount accommodates monitor screens up to 32 inches, providing a comfortable viewsudut ing.
5. Pengendalian dan Pelarasan
The gas spring arm allows for flexible and smooth adjustments to achieve your desired monitor position.
Figure 4: Full adjustability of the monitor arm. The arm allows for tilt (±90°), swivel (±90°), and 360° rotation for optimal viewing.
5.1 Pelarasan Ketegangan Spring Gas
The gas spring tension needs to be adjusted according to the weight of your monitor. Use the provided Allen key to adjust the tension screw located on the arm.
- If the monitor falls down, turn the screw mengikut arah jam (+) to increase tension.
- If the monitor rises up too easily, turn the screw lawan arah jam (-) to reduce tension.
Figure 5: Easy gas spring adjustment. Turn the screw clockwise (+) to increase tension if the equipment falls down, or counter-clockwise (-) to reduce tension if the equipment raises up too easily.
5.2 Height, Tilt, Swivel, and Rotation
- Pelarasan Ketinggian: Gently push or pull the monitor to the desired height. The gas spring will hold it in place once tension is correctly set.
- Condong: Tilt the monitor screen up or down (±80°) to reduce glare and optimize viewsudut ing.
- Pusing: Swivel the monitor left or right (±90°) to share your screen or adjust your viewkedudukan.
- Putaran: Rotate the monitor 360° between landscape and portrait orientations.
5.3 Pengurusan Kabel
Route your monitor cables through the integrated cable management clips on the arm to maintain a tidy workspace.
Figure 6: Integrated cable management. Cables can be routed along the arm to keep the workspace neat and prevent wire entanglement.
6. Penyelenggaraan
Penyelenggaraan berkala memastikan ketahanan dan operasi yang selamat pada dudukan monitor anda.
- Pembersihan: Lap pelekap dengan lembut, damp kain. Elakkan pembersih atau pelarut yang melelas.
- Semak Sambungan: Periodically check all screws and bolts, especially those securing the mount to the desk and the monitor to the VESA plate, to ensure they are tight.
- Spring Gas: If the gas spring tension feels off, re-adjust it according to Section 5.1.
7. Penyelesaian masalah
If you encounter issues with your monitor mount, refer to the following common problems and solutions.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Monitor sags or falls down | Ketegangan spring gas terlalu rendah untuk memantau berat. | Increase gas spring tension by turning the adjustment screw clockwise (+). Refer to Section 5.1. |
| Monitor floats up or is hard to push down | Ketegangan spring gas terlalu tinggi untuk memantau berat. | Decrease gas spring tension by turning the adjustment screw counter-clockwise (-). Refer to Section 5.1. |
| Mount is wobbly or unstable | Meja klamp/grommet mount is not tightened sufficiently. | Pastikan meja clamp or grommet mount is securely fastened to the desk. Check all connection points. |
| Monitor does not attach to VESA plate | Incorrect VESA screws or plate orientation. | Ensure you are using the correct VESA screws for your monitor and that the VESA plate is oriented correctly. |
8. Spesifikasi
- Jenama: suptek
- model: MD01AW
- Bahan: Keluli Aloi
- warna: putih
- Jenis Pemasangan: Pemasangan Atas Meja (C-clamp atau Grommet)
- Jenis Pergerakan: Putar, Condongkan, Pusing, Pelarasan Ketinggian
- Peranti Serasi: Monitor 13-32 inci
- Kapasiti Berat: 4.4 - 19.8 paun (2 - 9 kg)
- Keserasian VESA: 75x75mm, 100x100mm
- Sudut Kecondongan Maksimum: 80 Darjah
- Ketebalan Meja (C-clamp): 10-70mm
- Ketebalan Meja (Grommet): 10-70mm
- Diameter Lubang Grommet: 10-60mm
- Berat Barang: Kira-kira 4.76 paun (2.16 kg)
- Dimensi Pakej: Kira-kira 15.12 x 7.99 x 4.25 inci
9. Waranti dan Sokongan
suptek products are manufactured with quality and care. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official suptek website. Please have your model number (MD01AW) and purchase date available when contacting support.
