1. Arahan Keselamatan
Sila baca arahan ini dengan teliti sebelum pemasangan dan penggunaan. Simpan manual ini untuk rujukan pada masa hadapan.
- Keselamatan Elektrik: Installation should be performed by a qualified electrician to ensure safety and compliance with local electrical codes. Always turn off the main power supply before installation, maintenance, or repair.
- Voltage: This product operates on AC 85V-265V. Ensure your power supply matches this requirement.
- Tahan Air: The light fixture is IP65 rated, meaning it is protected against dust and low-pressure water jets. While suitable for outdoor use, avoid submerging it in water.
- Ketinggian Pemasangan: For optimal motion detection, install the light at a height of approximately 1.8 to 2.5 meters (5.9 to 8.2 feet).
- Suhu Operasi: Ensure the operating environment is within the specified temperature range to prevent damage.
2. Kandungan Pakej
Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:
- DELIPOP LED Wall Light (2 units)
- Perkakasan Pemasangan (skru, sauh dinding)
- Manual Arahan
3. Ciri-ciri Produk
- Integrated Motion Sensor: Detects movement within 3 to 8 meters (10 to 26 feet) at a 120° angle.
- Operasi automatik: Light turns on automatically at night when motion is detected and turns off approximately 15 seconds after no motion is detected.
- LED Cekap Tenaga: 24W power consumption with a long lifespan of over 50,000 hours.
- Pencahayaan Putih Hangat: 3000K color temperature for a comfortable and inviting ambiance.
- Pembinaan Tahan Lama: Made from die-cast aluminum alloy body and PC lampshade, resistant to rust, yellowing, high temperatures, and impacts.
- IP65 Kalis Air: Designed for outdoor use, resistant to various weather conditions.

Figure 3.1: Product dimensions and key components including high-quality LED chip, die-cast aluminum lamp body, and PIR motion sensor.
4. Spesifikasi
| Atribut | Nilai |
|---|---|
| Jenama | DELIPOP |
| Model | 24W LED Wall Light with Motion Sensor |
| Dimensi (L x W x H) | 29 x 10 x 9 cm (11.41 x 3.93 x 3.54 inci) |
| Berat badan | 1.8 Kilograms (per unit, for 2 units) |
| Voltage | AC 85V-265V |
| kuasa | 24 Watt |
| Fluks Bercahaya | 2370 Lumen |
| Suhu Warna | 3000K Putih Hangat |
| bahan | Aluminium, Polikarbonat (PC) |
| Penilaian Kalis Air | IP65 |
| Sudut Penderia Pergerakan | 120° |
| Julat Penderia Pergerakan | 3-8 meter (10-26 kaki) |
| Automatik Kelewatan | Approx. 15 seconds (after no motion) |
| Jangka hayat | > 50,000 jam |
| Kelas Kecekapan Tenaga | E |

Figure 4.1: EU Energy Efficiency Label for the DELIPOP light. For more details, refer to the Pangkalan data EPREL (pautan kod QR).
5. Panduan Pemasangan
Penting: Always ensure the main power supply is turned off before starting installation. It is recommended to have this product installed by a professional electrician.
- Sediakan Kawasan Pemasangan: Choose a suitable wall location, ideally between 1.8 to 2.5 meters (5.9 to 8.2 feet) high, for optimal motion sensor performance. Ensure the surface is clean and stable.
- Tandakan Titik Penggerudian: Use the mounting bracket (if separate) or the fixture itself as a template to mark the drilling points on the wall.
- Lubang gerudi: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert wall anchors if necessary.
- Sambungan Pendawaian: Carefully connect the household electrical wires to the light fixture's wires. Ensure correct polarity (Live, Neutral, Ground) according to local electrical standards. Use appropriate wire connectors and ensure all connections are secure and insulated.
- Pasang Lekapan: Secure the light fixture to the wall using the provided screws. Ensure it is firmly attached and stable.
- Pulihkan Kuasa: Once installation is complete and all connections are secure, turn the main power supply back on.

Gambar 5.1: Cthample of the DELIPOP wall light installed on an exterior wall.
6. Arahan Operasi
The DELIPOP LED wall light features an integrated motion sensor for automatic operation.
- Operasi siang hari: During daylight hours, the light will remain off to conserve energy, even if motion is detected.
- Operasi waktu malam: When it is dark, the motion sensor becomes active. If motion is detected within its 3-8 meter range and 120° angle, the light will automatically turn on.
- Matikan automatik: The light will remain on as long as continuous motion is detected. Approximately 15 seconds after no motion is detected, the light will automatically turn off.

Figure 6.1: Visual representation of the motion sensor's operational cycle, including daytime standby, nighttime activation, and automatic deactivation.
7. Penjagaan dan Penyelenggaraan
Regular cleaning and proper care will ensure the longevity and optimal performance of your DELIPOP wall light.
- Pembersihan: Putuskan sambungan kuasa sebelum membersihkan. Lapkan lekapan dengan lembut, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or components.
- Pemeriksaan: Periodically check the fixture for any signs of damage, loose connections, or wear. If any issues are found, consult a qualified electrician.
- LED: Sumber cahaya LED bersepadu direka bentuk untuk jangka hayat yang panjang dan tidak boleh diganti oleh pengguna.

Figure 7.1: The DELIPOP wall light is designed to be IP65 waterproof and resistant to cold weather conditions.
8. Penyelesaian masalah
If you encounter issues with your DELIPOP wall light, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lampu tidak menyala pada waktu malam. | 1. Tiada bekalan elektrik. 2. Sensor obstructed or faulty. 3. Still too bright (daylight sensor active). | 1. Check power connections and circuit breaker. 2. Ensure sensor is clean and unobstructed. Test sensor by waving hand. 3. Wait until it is sufficiently dark. |
| Lampu kekal menyala secara berterusan. | 1. Continuous motion detected. 2. Sensor faulty. | 1. Ensure no constant movement (e.g., swaying branches, pets) is within sensor range. 2. Contact customer support if problem persists after checking for motion. |
| Cahaya berkelip atau malap. | 1. Bekalan kuasa tidak stabil. 2. Sambungan pendawaian longgar. | 1. Consult an electrician to check power stability. 2. Turn off power and check all wiring connections. Re-secure if loose. |
9. Waranti dan Sokongan
DELIPOP is committed to providing high-quality products. For any questions, concerns, or technical support regarding your LED wall light, please contact DELIPOP customer service through your purchase platform.
Sila rujuk kepada dokumentasi pembelian anda untuk terma dan syarat waranti tertentu.





