1. Pengenalan
This manual provides detailed instructions for the installation, operation, and maintenance of your Tunze Turbelle NanoStream 6040.005 HUB Edition. This high-performance stream pump is designed for aquariums ranging from 20 to 500 liters (5.3 to 132 USgal.), offering adjustable flow rates and smart control capabilities.
The Turbelle NanoStream 6040.005 HUB Edition is equipped with a WIFI/Cloud-based controller (Turbelle Controller 7020) for precise flow management and features a compact design for easy integration into your aquarium.
2. Arahan Keselamatan
- Always disconnect the power supply before performing any maintenance or installation work on the pump.
- Ensure the power supply unit is placed in a dry area, away from water splashes.
- Jangan kendalikan pam jika kord kuasa atau mana-mana bahagian unit rosak.
- This device is intended for indoor use only and for aquariums.
- Jauhkan daripada kanak-kanak.
- The pump must be fully submerged during operation.
3. Kandungan Pakej
Sila pastikan semua item ada dalam pakej:
- Tunze Turbelle NanoStream 6040.005 Pump
- Turbelle Controller 7020 (WIFI/Cloud-based)
- Power Supply Unit (100-240V / 50-60Hz)
- Magnet Holder (for glass thickness up to 12 mm / 1/2”)
- Pemesong Aliran
- Manual Arahan
4. Persediaan dan Pemasangan
Follow these steps to properly install your Turbelle NanoStream 6040.005 pump:
4.1. Positioning the Pump
Image: The Turbelle NanoStream 6040.005 pump securely mounted to the aquarium glass using its magnet holder.
- Pilih Lokasi: Select a position in your aquarium where the pump can create optimal water flow without disturbing substrate or corals excessively. Ensure the pump is fully submerged.
- Attach Magnet Holder: Place the pump unit inside the aquarium and align the external magnet holder on the outside of the glass. The strong magnets will secure the pump in place. The magnet holder is suitable for glass thicknesses up to 12 mm (1/2 inch).
- Laraskan Arah: The pump's outlet can be rotated to direct the water flow as desired.
4.2. Menyambungkan Pengawal
Image: The Tunze Turbelle Controller 7020, showing its interface for adjusting pump settings and modes.
- Connect Pump to Controller: Plug the pump's cable into the designated port on the Turbelle Controller 7020.
- Sambungkan Bekalan Kuasa: Plug the power supply unit into the controller, then plug the power supply into a suitable electrical outlet.
- Kuasa Permulaan: The pump will perform a brief self-test upon initial power-up.
5. Arahan Operasi
The Turbelle NanoStream 6040.005 is controlled via the Turbelle Controller 7020, offering various modes and settings.
5.1. Pengawal Atasview
Imej: Terperinci view of the Tunze Turbelle Controller 7020, highlighting its control functions.
The controller allows you to adjust flow rate, set wave patterns, and utilize special functions like the food timer.
5.2. Operasi Asas
- Pemilihan Mod: Use the "Mode" button to cycle through different operating modes (e.g., Constant, Pulse, Wave).
- Pelarasan Aliran: Use the "+" and "-" buttons to increase or decrease the flow rate in Constant mode, or to adjust pulse intensity/duration in other modes.
- Food Timer: Press the "Food Timer" button to temporarily stop the pump for approximately 10 minutes, allowing fish to feed undisturbed. The pump will automatically resume operation after the timer expires.
- Wave Search: The "Wave Search" function helps to find the optimal wave frequency for your aquarium.
5.3. WIFI/Cloud Control
The HUB Edition features WIFI/Cloud-based control. Refer to the separate Tunze app manual for detailed instructions on connecting your controller to your home network and managing it remotely via the cloud.
6. Penyelenggaraan
Regular maintenance ensures optimal performance and longevity of your Turbelle NanoStream pump.
6.1. Cleaning the Pump
Image: The Turbelle NanoStream 6040.005 pump, illustrating its components for easy disassembly and cleaning.
- Putuskan Kuasa: Always unplug the pump from the power outlet before cleaning.
- Keluarkan dari Akuarium: Keluarkan pam dari akuarium dengan berhati-hati.
- Buka: Gently detach the flow deflector and the protective cage. The impeller can then be carefully removed.
- Komponen Bersih: Use a soft brush and warm water to remove algae, calcium deposits, and other debris from all pump components, especially the impeller and its housing. For stubborn deposits, a mild vinegar solution can be used, followed by thorough rinsing.
- Pasang semula: Reassemble the pump in reverse order, ensuring all parts are correctly seated.
- Kekerapan: Clean the pump every 1-3 months, depending on the amount of debris and algae in your aquarium.
6.2. Cable Inspection
Periodically inspect the power cable for any signs of wear, cuts, or damage. If any damage is found, discontinue use immediately and contact Tunze support.
7. Penyelesaian masalah
Berikut ialah beberapa isu biasa dan penyelesaiannya:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pam tidak dapat dihidupkan atau aliran lemah. |
|
|
| Pam mengeluarkan bunyi yang luar biasa. |
|
|
| Pengawal tidak bertindak balas. |
|
|
8. Spesifikasi
| Model | Tunze Turbelle NanoStream 6040.005 HUB Edition |
| Nombor Model Item (Dalaman) | 6095.005 |
| Saiz Akuarium | 20 to 500 liters (5.3 to 132 USgal.) |
| Kadar Aliran | Approx. 200 to 4,500 l/h (53 to 1,190 USgal./h) |
| Penggunaan Tenaga | 1.5 - 13 Barat |
| Unit Bekalan Kuasa | 100-240V / 50-60Hz |
| Panjang Kabel | 3 m (118") |
| Dimensions (without flow deflector and Magnet Holder) | 60 x 43 x 68 mm (2.36 x 1.69 x 2.68 inci) |
| Diameter alur keluar | ø40 mm (1.57”) |
| Magnet Holder Glass Thickness | Up to 12 mm (1/2”) |
| bahan | plastik |
| warna | Black/Blue/White |
| Berat Barang | 2.75 paun |
9. Waranti
The Tunze Turbelle NanoStream 6040.005 HUB Edition comes with a Waranti 5 tahun from the date of purchase. This warranty covers manufacturing defects and material faults under normal use conditions. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, neglect, or unauthorized modifications.
10. Sokongan dan Maklumat Hubungan
For further assistance, technical support, or warranty inquiries, please contact Tunze customer service or visit the official Tunze webtapak.
Sokongan dalam talian: Visit the Tunze Store on Amazon
Sila sediakan nombor model produk anda (6040.005) dan tarikh pembelian semasa menghubungi sokongan.
