AMPManual Pengguna Suis Pintar Sentuh Dinding WiFi AI

1. Pengenalan

Terima kasih kerana memilih AMPAI WiFi Wall Touch Smart Switch. This smart switch is designed to upgrade your home lighting control with advanced features and convenience. It offers multiple control methods including touch panel, RF433 remote, and voice control via Alexa and Google Home. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure optimal performance and safety.

Rajah 1: AMPAI WiFi Wall Touch Smart Switch (4 Gang) and included RF433 Remote.

2. Maklumat Keselamatan Penting

• Keselamatan Elektrik: Installation should be performed by a qualified electrician or a person with a thorough understanding of electrical systems. Always turn off power at the circuit breaker before installation or maintenance.
• Keserasian: This switch is designed for standard on/off control only. It is NOT compatible with dimmable bulbs or fixtures. Attempting to use it with dimmable bulbs may cause damage to the bulbs or the switch.
• Rangkaian WiFi: The smart switch operates on a 2.4GHz Wi-Fi network only. It is not compatible with 5GHz Wi-Fi networks. Ensure your router supports 2.4GHz.
• Pendawaian: This switch supports both neutral wire and no neutral wire (single fire) installations. Refer to the wiring diagrams carefully.
• Not a Traditional 3-Way Switch: While it offers 3-way control via multi-control methods (app, remote, voice), it does not function as a traditional mechanical 3-way switch requiring traveler wires between two switches.

Figure 2: Key attention points regarding 2.4GHz WiFi, wiring, and non-compatibility with traditional 3-way or dimmable setups.

3. Kandungan Pakej

Sila semak kandungan pakej semasa dibuka untuk memastikan semua item ada dan tidak rosak:

• AMPAI WiFi Wall Touch Smart Switch (4 Gang)
• Perkakasan Pemasangan (Skru)
• RF433 Remote Control (if included in your specific package)
• Manual Pengguna (dokumen ini)

4. Persediaan dan Pemasangan

4.1 Arahan Pendawaian

WARNING: Ensure power is OFF at the circuit breaker before beginning any wiring.

This smart switch supports two wiring methods: with a neutral wire or without a neutral wire (single fire). Identify your home's wiring configuration before proceeding.

Figure 3: Wiring diagrams for Neutral and Fire Line (left) and Single Fire (right) installations. A capacitor is required for single fire wiring.

1. Matikan kuasa: Locate the circuit breaker controlling the light switch and turn it OFF. Verify power is off using a voltage penguji.
2. Remove old switch: Carefully remove the existing wall plate and unscrew the old switch from the wall box. Disconnect the wires.
3. Kenal pasti wayar: Identify the Live (Line), Load, and Neutral wires (if present). For single fire wiring, you will only have Live and Load.
4. Sambungkan Suis Pintar dengan wayar:
   • Neutral and Fire Line Wiring: Connect the Live wire to the 'L' terminal, the Neutral wire to the 'N' terminal, and the Load wires to the 'L1', 'L2', 'L3', 'L4' terminals corresponding to your light circuits.
   • Single Fire Wiring: Connect the Live wire to the 'L' terminal and the Load wires to the 'L1', 'L2', 'L3', 'L4' terminals. A capacitor must be connected across the Live and Load wires of the light fixture for stable operation.
5. Pasang suis: Secure the smart switch into the wall box using the provided screws. Attach the glass panel.
6. Pulihkan kuasa: HIDUPKAN semula kuasa pada pemutus litar.

4.2 App Installation and Pairing (Tuya Smart Life)

1. Muat turun Aplikasi: Download the "Smart Life" or "Tuya Smart" app from the App Store (iOS) or Google Play Store (Android).
2. Daftar/Log Masuk: Buka aplikasi dan daftar akaun baharu atau log masuk jika anda sudah mempunyai akaun.
3. Tambah Peranti:
   • Pastikan telefon anda disambungkan ke rangkaian Wi-Fi 2.4GHz.
   • Dalam aplikasi, ketik ikon "+" di penjuru kanan sebelah atas untuk menambah peranti.
   • Select "Electrical Switch" or "Wall Switch" from the device list.
   • Follow the on-screen instructions to put the switch into pairing mode (usually by pressing and holding a button on the switch until an indicator light blinks rapidly).
   • Confirm the indicator light is blinking rapidly in the app and enter your Wi-Fi password.
   • The app will connect to the switch. Once connected, you can rename the switch and assign it to a room.

4.3 RF433 Remote Pairing

The included RF433 remote can be paired directly with the switch for local control without Wi-Fi.

1. Masukkan Mod Berpasangan: On the smart switch, press and hold the touch button you wish to pair for approximately 5-7 seconds until you hear a "beep" sound or see a small indicator light flash.
2. Press Remote Button: Within 3 seconds, press the corresponding button (A, B, or C) on the RF433 remote.
3. Pengesahan: The switch will "beep" again or the light will stop flashing, indicating successful pairing.

5. Mengendalikan Suis Pintar

5.1 Sentuhan Kawalan

Simply touch the corresponding icon on the glass panel to turn the connected light ON or OFF.

Figure 4: The smart switch supports multiple control methods for convenience.

5.2 Smart Life / Tuya App Control

Open the Smart Life or Tuya Smart app on your smartphone. From the device list, tap on your smart switch to access its control interface. You can turn lights ON/OFF, set schedules, and create scenes from anywhere with an internet connection.

5.3 Kawalan Suara (Alexa & Google Home)

The AMPAI Smart Switch is compatible with Amazon Alexa and Google Home for convenient voice control.

1. Pautkan Akaun: In the Alexa or Google Home app, enable the "Smart Life" or "Tuya Smart" skill/action and link your Smart Life/Tuya account.
2. Cari Peranti: Ask Alexa or Google Home to "Discover devices" or manually add them through the app.
3. Perintah Suara: Once discovered, you can use commands like:
   • "Alexa, hidupkan [Nama Cahaya]"
   • "Hei Google, matikan [Nama Cahaya]"
   • "Alexa, set [Light Name] to 50%" (Note: This switch does not support dimming, so dimming commands will not work.)

Figure 5: Enjoy hands-free control with Amazon Alexa and Google Assistant.

Alat Kawalan Jauh 5.4 RF433

Use the paired RF433 remote to control the switch from a distance. Each button (A, B, C) on the remote can be paired to control a specific gang or group of gangs on the switch.

Figure 6: The RF433 remote provides an additional convenient control method.

5.5 Timer and Scene Functions

Utilize the Smart Life/Tuya app to set schedules and create custom scenes for your lighting. For example, you can set lights to turn on at sunset or off at a specific time, or create a "Movie Night" scene that turns off certain lights.

Figure 7: Set timers and scenes for automated lighting control.

6. Penyelenggaraan

The AMPAI Smart Switch requires minimal maintenance. To keep it clean and functioning properly:

• Pembersihan: Gently wipe the glass panel with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as they may damage the surface.
• Kitaran Kuasa: Jika suis menjadi tidak responsif, cuba matikan kuasa pada pemutus litar selama 10 saat, kemudian hidupkannya semula.
• Kemas kini Firmware: Periksa aplikasi Smart Life/Tuya secara berkala untuk sebarang kemas kini perisian tegar yang tersedia untuk suis anda bagi memastikan prestasi dan keselamatan yang optimum.

7. Penyelesaian masalah

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information and technical support, please contact AMPAI customer service. You can often find support contact details on the product packaging, the manufacturer's official website, or through your purchase platform (e.g., Amazon).

Pengeluar: AMPAI

Untuk bantuan lanjut, sila layari AMPAI Store on Amazon.