Maklumat Keselamatan Penting
Please read and understand all instructions and safety warnings before assembly and use of this product. Failure to follow these instructions may result in injury or product damage.
- Do not attempt to lift or move the box spring when it is fully assembled.
- Sentiasa ikut arahan pemasangan dengan teliti untuk mengelakkan ketidakstabilan atau keruntuhan.
- Be cautious of sharp edges and the folding design during assembly and use.
- Regularly inspect the box spring for any signs of wear or damage.
- Jangan melebihi kapasiti berat maksimum 3500 lbs.
Kandungan Pakej
Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan.
- Box Spring Frame Components
- Tudung Fabrik
- Manual Pemasangan
- Skru
- sepana
Persediaan dan Perhimpunan
The MAF King Size Box Spring features a foldable design for easier setup. It is recommended that two adults assemble this product.
Alat yang Diperlukan:
- Included Wrench
- (Optional) Power screwdriver for faster assembly
Langkah Perhimpunan:
- Buka Pembungkusan Komponen: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Ensure all listed components are present.
- Buka Bingkai: The box spring frame comes in a folded configuration. Gently unfold the sections as shown in the diagram below. Ensure the triangular support designs lock into place.
- Sambungan Selamat: Align the frame sections and secure them using the provided screws and wrench. Ensure all connections are tightened securely to prevent wobbling or noise.
- Pasang Bilah: Place the metal slats into their designated positions on the frame. The U-shaped groove design helps secure each pole and support frame.
- Sapukan Penutup Fabrik: Once the frame is fully assembled and stable, carefully place the removable fabric cover over the box spring. The cover is designed for easy application and removal.
Figure 1: Assembly Steps for the MAF Box Spring.
Figure 2: Foldable Design and Easy Assembly Overview.
Figure 3: Key Structural Features: Round Corners, Triangular Support, and U-Shaped Grooves.
Arahan Operasi
The MAF Box Spring is designed to provide stable support for your mattress. It can be used with various mattress types, including innerspring, memory foam, and latex mattresses.
- penempatan: Position the assembled box spring on a compatible bed frame or directly on the floor if desired. Ensure it is level and stable.
- Peletakan tilam: Carefully place your mattress on top of the box spring. The box spring is designed to support mattresses up to 80"L x 76"W.
- Kapasiti Berat: The box spring is engineered to support up to 3500 lbs. Do not exceed this weight limit to maintain structural integrity and safety.
- Pengurangan Bunyi: The U-shaped groove design and seamless welding are intended to prevent structural distortion and squeaks, providing a quiet sleeping environment.
Figure 4: Proper Layering of Bed Components.
Penyelenggaraan dan Penjagaan
Proper maintenance ensures the longevity and performance of your MAF Box Spring.
- Membersihkan Penutup: The fabric cover is removable and washable. Remove it from the frame for cleaning as needed. Follow care instructions on the cover label if available, or wash with mild detergent and cold water, then air dry.
- Pembersihan Bingkai: Lap bingkai logam dengan kain kering untuk menghilangkan habuk dan serpihan. Elakkan menggunakan bahan kimia yang keras atau pembersih yang kasar.
- Pemeriksaan Berkala: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary. Inspect the frame for any signs of bending, cracks, or damage.
- Moving the Box Spring: If you need to move the box spring, it is recommended to disassemble it first, especially if moving through narrow doorways or stairs, to prevent damage to the product or injury.
Menyelesaikan masalah
If you encounter any issues with your MAF Box Spring, refer to the following common solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Bunyi Berdecit | Sambungan longgar atau penempatan yang tidak sekata. | Ensure all screws are tightly secured. Verify the box spring is placed on a flat, level surface. The U-shaped groove design is intended to minimize noise; if squeaking persists, re-check assembly. |
| Ketidakstabilan/Goyah | Incomplete assembly or damaged components. | Re-check all assembly steps, ensuring triangular supports are engaged and all fasteners are tight. Inspect for any bent or damaged parts. |
| Mattress Sagging | Exceeded weight capacity or improper mattress support. | Ensure the combined weight of users and mattress does not exceed 3500 lbs. Verify the mattress is compatible with a box spring. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | MAF |
| Nombor Model | MAF-MT33-10K |
| Saiz | Raja |
| Dimensi Produk | 78.8"L x 75.5"W x 10"H |
| Saiz Tilam Serasi | 80" L x 76" W |
| Ciri Khas | Foldable Design, Round Corner Design, Triangular Support, U-Shaped Groove Design |
| Jenis Selesai | Bersalut Serbuk |
| Komponen yang Disertakan | Box Spring Frame, Fabric Cover, Installation Manual, Screws, Wrench |
| Arahan Penjagaan Produk | Wipe with Dry Cloth, Removable and Washable Fabric Cover |
| Perhimpunan Diperlukan | ya |
| Jarak Tanah ke Item | 10 Inci |
| Berat Barang | 49.1 paun |
| Kapasiti Berat Maksimum | 3500 paun |
Figure 5: MAF Box Spring Size Chart.
Waranti dan Sokongan
Specific warranty details for the MAF Box Spring are not provided within this manual. For warranty information, please refer to the product packaging or contact MAF customer support directly.
For further assistance, questions, or to report any issues, please visit the official MAF store or contact their customer service department.
