Manual Pengguna Sarung Permainan Mid Tower ANTEC CX700 ATX

pengenalan

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your ANTEC CX700 ATX Mid Tower Gaming Case. Please read this manual carefully before beginning installation to ensure proper assembly and optimal performance.

Figure 1: ANTEC CX700 ATX Mid Tower Gaming Case. This image displays the overall design of the case, highlighting its panoramic glass panels and the vibrant ARGB fans visible through the transparent surfaces.

Kandungan Pakej

Sahkan bahawa semua komponen terdapat dalam pakej:

• ANTEC CX700 ATX Mid Tower Gaming Case
• Accessory Box (screws, cable ties, standoffs)
• Manual Pengguna (dokumen ini)
• Pre-installed ARGB Fans (3 x 120mm reverse fans on PSU shroud, 2 x 120mm reverse fans on right side, 1 x 120mm fan in rear)

Persediaan dan Pemasangan

Follow these steps for proper installation of your PC components into the CX700 case.

1. Menyediakan Kes

1. Keluarkan Panel Sisi: The CX700 features tool-free panel design. Gently pull the tempered glass side panel (left) and the steel side panel (right) to detach them.
2. Kotak Aksesori: Locate the accessory box inside the case, which contains all necessary screws and mounting hardware.

Rajah 2: Dalaman view of the ANTEC CX700 case. This image illustrates the spacious interior, fan mounting locations, and the layout for component installation.

2. Pemasangan Papan Induk

1. Pasang Kebuntuan: Ensure the correct standoffs are installed for your motherboard form factor (ATX, Micro-ATX, ITX).
2. Pasang Papan Induk: Carefully place your motherboard onto the standoffs and secure it with the provided screws.

3. Pemasangan Unit Bekalan Kuasa (PSU).

1. Kedudukan PSU: Luncurkan PSU ke dalam petak yang ditetapkan di bahagian bawah belakang sarung.
2. PSU selamat: Fasten the PSU with screws from the rear of the case. The PSU mount includes EVA anti-vibration foams.

4. Pemasangan Pemacu Storan

The CX700 supports 2 x 3.5"/2.5" drive mounts and 2 x 2.5" drive mounts.

1. 3.5"/2.5" Drives: Utilize the drive cages located near the PSU shroud.
2. 2.5" Drives: Mount SSDs on the dedicated 2.5" brackets behind the motherboard tray.

5. Pemasangan Kad Grafik (GPU).

1. Remove PCI Slot Covers: Remove the necessary reusable PCI slot covers from the rear of the case.
2. Masukkan GPU: Carefully insert your GPU into the PCIe slot on the motherboard and secure it with screws. The case supports GPUs up to 410mm in length (270mm with side radiator).

6. Pengurusan Kabel

The CX700 provides 23mm of cable management space behind the motherboard tray. Route cables neatly using the provided cable ties and routing holes to ensure optimal airflow and a clean build.

Arahan Operasi

Setelah semua komponen dipasang dan kabel disambungkan, anda boleh menghidupkan sistem anda.

• Butang Kuasa: Located on the front access panel. Press to power on or off your system.
• Butang Kawalan LED: Also on the front access panel. Use this button to cycle through various ARGB lighting modes for the pre-installed fans.
• Port USB: The front panel includes 1 x USB 3.0 and 1 x Type-C 3.2 Gen 2 port for convenient peripheral connectivity.
• Jack Audio: A combined headphone/mic combo jack is available on the front panel.

Figure 3: Front I/O Panel of the ANTEC CX700. This image highlights the accessible ports and control buttons for user convenience.

Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your gaming case.

• Pembersihan Habuk: Periodically clean dust filters and interior components using compressed air or a soft brush. Dust accumulation can impede airflow and cooling performance.
• Pembersihan Panel: Wipe the tempered glass panels with a soft, lint-free cloth and a mild glass cleaner. Avoid abrasive materials.
• Pemeriksaan Pengurusan Kabel: Ensure cables remain neatly organized and do not obstruct airflow.

Menyelesaikan masalah

Bahagian ini menangani isu biasa yang mungkin anda hadapi.

• Tiada Kuasa:
  • Check if the PSU is properly connected to the wall outlet and the motherboard.
  • Pastikan kabel butang kuasa daripada bekas disambungkan dengan betul ke pengepala panel hadapan papan induk.
• Fans Not Spinning/ARGB Not Lighting:
  • Verify fan power cables are securely connected to the motherboard or fan controller.
  • Ensure ARGB cables are properly connected to the motherboard's ARGB header or the integrated LED controller.
  • Use the LED control button on the front panel to cycle through modes.
• Aliran Udara yang Buruk/Terlalu Panas:
  • Bersihkan penapis habuk dan komponen dalaman.
  • Ensure fans are oriented correctly for optimal airflow (intake/exhaust).
  • Check for obstructions to airflow inside the case.

Spesifikasi

Detailed technical specifications for the ANTEC CX700 ATX Mid Tower Gaming Case.

Waranti dan Sokongan

For warranty information and technical support, please visit the official Antec webtapak atau hubungi perkhidmatan pelanggan mereka. Simpan bukti pembelian anda untuk tuntutan waranti.

Official Antec Webtapak: www.antec.com