CurrentBody Skin LED 4-in-1 Mask

1. Pengenalan

Thank you for choosing the CurrentBody Skin LED 4-in-1 Mask. This advanced device utilizes multi-wavelength LED light therapy to address various skin concerns, including smoothing, brightening, and restoring skin health. Featuring 360 high-quality LED bulbs and patented pillow technology, it ensures optimal power and even light diffusion for maximum skin coverage. The mask also incorporates LED Facial Mapping for targeted treatments. Please read this manual thoroughly before first use to ensure safe and effective operation.

2. Maklumat Keselamatan

Prioritize your safety. Always perform a sensitivity test before initial use and adhere to all warnings and instructions.

Ujian Sensitiviti

It is crucial to test for light sensitivity prior to using the device. We recommend performing this test on your inner arm or thigh:

1. Langkah 1: Hidupkan peranti anda.
2. Langkah 2: Place the device on your arm and conduct a full 10-minute treatment, ensuring your skin is clean and dry before use.
3. Langkah 3: After 10 minutes, visually check the treated area. If the area has turned red and this redness persists for more than 2 hours, it indicates that your skin has a sensitivity to light. Discontinue use if sensitivity is detected.

Langkah Keselamatan Am

• Do not use if you are pregnant, breastfeeding, or have a history of light-induced seizures.
• Consult a healthcare professional before use if you have any medical conditions, are taking photosensitizing medications, or have concerns about skin conditions.
• Jauhkan daripada kanak-kanak.
• Jangan rendam peranti di dalam air atau gunakannya dalam persekitaran basah.
• Jangan cuba membuka atau membaiki peranti. Rujuk semua servis kepada kakitangan yang berkelayakan.
• Gunakan hanya kabel pengecas dan penyesuai kuasa yang disediakan.

3. Apa yang ada di dalam Kotak

Upon opening your CurrentBody Skin LED 4-in-1 Mask package, please ensure all the following components are present:

• CurrentBody Skin LED 4-in-1 Mask
• Unit Pengawal
• Kabel Pengecas USB
• Manual Pengguna
• Storage Bag (may vary by model)

4. Produk Lebihview

Rajah 1: Depan view of the CurrentBody Skin LED 4-in-1 Mask.

Figure 2: The LED mask comfortably fitted on a user's face, demonstrating its ergonomic design.

Rajah 3: Gambar jarak dekat view of the numerous LED bulbs embedded within the mask, showcasing the multi-wavelength light sources.

Figure 4: The LED mask alongside its compact controller unit, which manages the device's functions.

Figure 5: The mask being held, highlighting the double straps designed for a secure and comfortable fit during use.

5. Persediaan

5.1 Mengecas Peranti

Before first use, fully charge your CurrentBody Skin LED 4-in-1 Mask. Connect the USB charging cable to the mask's charging port and plug the other end into a compatible USB power source. The indicator light on the controller will show charging status and turn off when fully charged.

5.2 Menjalankan Ujian Sensitiviti

As detailed in Section 2, perform the sensitivity test on your inner arm or thigh before applying the mask to your face.

5.3 Preparing Your Skin

Ensure your face is clean, dry, and free of makeup or heavy creams before each treatment. This allows for optimal light penetration.

5.4 Fitting the Mask

Place the mask over your face, aligning the eye and mouth openings. Adjust the double straps around your head to ensure a snug yet comfortable fit. The mask should feel secure without being overly tight.

6. Arahan Operasi

6.1 Menghidupkan/Mematikan

Press and hold the power button on the controller unit to turn the mask on. The LED lights will illuminate. To turn off, press and hold the power button again.

6.2 Treatment Modes and Duration

The CurrentBody Skin LED 4-in-1 Mask offers multiple wavelengths for various skin concerns. The device is pre-programmed for optimal treatment sessions.

• Each treatment session lasts for 10 minit. The device will automatically shut off after the session is complete.
• The mask utilizes 4 LED light therapy facial treatments in 1 mask, using 5 different wavelengths, and LED Facial Mapping for zoned treatments. The device automatically cycles through the appropriate wavelengths for a comprehensive treatment.

6.3 Recommended Usage Frequency

For best results, use the CurrentBody Skin LED 4-in-1 Mask 3 to 5 times a week. Consistency is key to achieving desired improvements in skin texture, brightness, and overall appearance.

7. Penyelenggaraan

7.1 Cleaning the Mask

After each use, gently wipe the surface of the mask with a soft, damp cloth. Do not use abrasive cleaners, alcohol, or harsh chemicals, as these can damage the device. Ensure the mask is completely dry before storing.

7.2 Penyimpanan

Store the mask in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective bag to prevent damage.

8. Penyelesaian masalah

If you encounter any issues with your CurrentBody Skin LED 4-in-1 Mask, please refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact CurrentBody customer support for further assistance.

9. Spesifikasi

10. Waranti & Sokongan

The CurrentBody Skin LED 4-in-1 Mask comes with a manufacturer's warranty. Please refer to the warranty card included in your product packaging or visit the official CurrentBody webtapak untuk terma dan syarat jaminan terperinci.

For technical support, troubleshooting assistance beyond what is covered in this manual, or to inquire about replacement parts, please contact CurrentBody customer service through their official website or the contact information provided with your purchase. When contacting support, please have your product model and purchase date ready.