be quiet! Pure Power 12 1000W Power Supply User Manual

1. Pengenalan

This manual provides essential information for the installation, operation, and maintenance of your be quiet! Pure Power 12 1000W Power Supply. This power supply unit (PSU) is designed to deliver stable and efficient power to your computer system, featuring 80 Plus Gold efficiency, ATX 3.1 compliance, and support for PCIe 5.1 GPUs.

Please read this manual thoroughly before installing and operating the power supply to ensure safe and correct usage.

Image 1.1: The be quiet! Pure Power 12 1000W Power Supply, showcasing its sleek black design and fan grill.

2. Arahan Keselamatan

Always observe the following safety instructions to prevent injury or damage to the product and connected components:

• Jangan buka unit bekalan kuasa. vol tinggitages are present inside, which can cause electric shock. The warranty will be void if the unit is opened.
• Hanya kakitangan yang berkelayakan harus melakukan pembaikan.
• Ensure the power supply is disconnected from the mains power before installation or maintenance.
• Do not operate the power supply in high humidity or wet conditions.
• Pastikan pengudaraan yang betul di sekeliling bekalan kuasa untuk mengelakkan terlalu panas.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• be quiet! Pure Power 12 1000W Power Supply Unit
• Kabel kuasa utama
• Modular cable set (including ATX 3.1 12V-2x6 connector)
• Memasang skru
• Pengikat kabel
• Manual pengguna

Image 3.1: The be quiet! Pure Power 12 1000W Power Supply shown with its accompanying cables, including the main power cable and various modular connectors.

4. Pemasangan dan Persediaan

Follow these steps to install your power supply:

1. Sediakan sistem anda: Pastikan komputer anda dimatikan dan dicabut daripada soket dinding.
2. Tanggalkan PSU lama (jika berkenaan): Disconnect all cables from your old power supply and remove it from the PC case.
3. Mount the new PSU: Place the be quiet! Pure Power 12 1000W into the designated PSU bay in your PC case. Secure it with the provided mounting screws.
4. Connect essential cables:
   • Connect the 24-pin ATX motherboard power cable.
   • Connect the 8-pin (4+4) CPU power cable to your motherboard.
   • For modern graphics cards, connect the ATX 3.1 PCIe 5.1 12V-2x6 connector. This connector supports up to 600W for compatible GPUs.
   • Connect other necessary cables for your components (SATA for storage drives, PCIe for additional graphics cards or expansion cards).
5. Pengurusan Kabel: Route cables neatly to improve airflow and aesthetics. Use the provided cable ties.
6. Semakan Akhir: Periksa semula semua sambungan untuk memastikan ia selamat.

Imej 4.1: Jarak dekat view of the ATX 3.1 PCIe 5.1 12V-2x6 connector, designed for high-power graphics cards.

Imej 4.2: Bekasample of the power supply unit installed within a computer case, demonstrating cable routing.

5. Operasi

After successful installation, connect the main power cable to the PSU and a wall outlet. Flip the power switch on the back of the PSU to the 'ON' position. You can then power on your computer system as usual.

The be quiet! Pure Power 12 features a silence-optimized 120mm fan, ensuring quiet operation even under load. The fan speed is automatically regulated based on the power supply's temperature to maintain optimal cooling and low noise levels.

Imej 5.1: A view of the silence-optimized 120mm fan integrated into the power supply, designed for efficient and quiet cooling.

6. Penyelenggaraan

Untuk memastikan jangka hayat dan prestasi optimum bekalan kuasa anda, penyelenggaraan berkala disyorkan:

• Pembersihan: Regularly clean the exterior of the power supply and the fan grill using a soft, dry cloth. For dust accumulation inside the unit, use compressed air, ensuring the fan blades are held stationary to prevent damage.
• Pengudaraan: Ensure that the air intake and exhaust vents of the power supply are not obstructed.
• Komponen Dalaman: Do not attempt to clean or service internal components. Refer to Section 2 for safety warnings regarding opening the unit.

7. Penyelesaian masalah

If you encounter issues with your power supply, consider the following troubleshooting steps:

• Tiada Kuasa:
  • Check if the main power cable is securely connected to both the PSU and the wall outlet.
  • Pastikan suis kuasa di belakang PSU berada dalam kedudukan 'HIDUP'.
  • Sahkan bahawa soket dinding berfungsi dengan memasang peranti lain.
  • Confirm all internal power cables (24-pin ATX, CPU, GPU) are correctly seated.
• Ketidakstabilan/Ranap Sistem:
  • Pastikan keperluan kuasa sistem anda tidak melebihi kapasiti 1000W PSU.
  • Periksa sambungan kabel yang longgar.
  • Pantau suhu sistem untuk menolak kepanasan berlebihan komponen lain.
• Bunyi Luar Biasa:
  • Ensure no cables are obstructing the PSU fan.
  • If the noise persists and is not related to fan operation, contact customer support.

If these steps do not resolve the issue, please contact be quiet! customer support for further assistance.

8. Spesifikasi

Key technical specifications for the be quiet! Pure Power 12 1000W Power Supply:

Image 8.1: The product label detailing electrical specifications and compliance information for the Pure Power 12 series.

9. Waranti dan Sokongan

Your be quiet! Pure Power 12 1000W Power Supply is covered by a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official be quiet! webtapak untuk terma dan syarat jaminan terperinci.

For technical support, product inquiries, or warranty claims, please visit the official be quiet! support page or contact their customer service department. Contact information can typically be found on the be quiet! webtapak atau dalam pembungkusan produk.