1. Pengenalan
Thank you for choosing DD Audio RL-M 6.5" Midrange Speakers. These speakers are designed to deliver clear and powerful midrange audio performance for your vehicle's sound system. They feature a compact design for easy installation and are engineered for optimal performance with both factory and aftermarket amplification. This manual provides essential information for proper installation, operation, and maintenance of your speakers.
2. Maklumat Keselamatan
Please read all instructions carefully before installation and use. Failure to follow these guidelines may result in damage to the product, vehicle, or personal injury.
- Pemasangan Profesional Disyorkan: If you are unsure about any aspect of installation, consult a qualified car audio technician.
- Putuskan Kuasa: Sentiasa putuskan sambungan terminal negatif bateri kenderaan sebelum memulakan sebarang kerja elektrik untuk mengelakkan litar pintas dan renjatan elektrik.
- Pendawaian: Ensure all wiring is correctly routed and secured to prevent pinching, chafing, or shorting. Use appropriate gauge wire for connections.
- Tahap Kelantangan: Pendedahan berpanjangan kepada tahap volum tinggi boleh menyebabkan kerosakan pendengaran. Laraskan kelantangan ke tahap yang selesa.
- Pengudaraan: Pastikan pengudaraan yang mencukupi di sekeliling amplifiers and other audio components to prevent overheating.
- Keadaan Persekitaran: Avoid exposing speakers to excessive moisture, direct sunlight, or extreme temperatures.
3. Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej sebelum meneruskan pemasangan.
- 2 x DD Audio RL-M 6.5" Midrange Speakers
- 2 x Speaker Grills

Image 3.1: The DD Audio Redline Series product box. This box contains the two 6.5-inch midrange speakers and their accompanying grills.
4. Persediaan dan Pemasangan
The DD Audio RL-M speakers are designed with compact motors and shallow frames, facilitating drop-in installation in many stock locations.
4.1 Lokasi Pemasangan
Identify suitable mounting locations in your vehicle, typically door panels or rear deck, that can accommodate 6.5-inch speakers. Ensure there is sufficient depth for the speaker (Mounting Depth: 2.3 inches / 58.5 mm) and adequate clearance for the speaker diameter (Mounting Diameter: 5.6 inches / 143 mm).

Image 4.1: Two DD Audio RL-M 6.5-inch midrange speakers shown without their protective grills, revealing the cone and surround.
4.2 Sambungan Pendawaian
- Kenal pasti Terminal: Locate the positive (+) and negative (-) terminals on the back of each speaker.
- Sambungkan Wayar Pembesar Suara: Connect the positive output from your amplifier or head unit to the speaker's positive terminal, and the negative output to the speaker's negative terminal. Ensure correct polarity for optimal sound reproduction.
- Sambungan Selamat: Use appropriate connectors and ensure all connections are tight and free from corrosion.
- Padanan Impedans: These speakers have a 4-Ohm impedance. Ensure your amplifier is stable at a 4-Ohm load.

Image 4.2: A comparison view showing one DD Audio RL-M speaker with its protective grill installed and another speaker without the grill, highlighting the different appearances.
4.3 Grill Installation
Once the speakers are mounted and wired, you can install the included grills for protection and a finished appearance. Align the grill with the speaker's mounting holes and secure it using the provided hardware (if applicable, or snap into place).

Image 4.3: Two DD Audio RL-M 6.5-inch midrange speakers with their protective grills securely installed, ready for use.
5. Mengendalikan Pembesar Suara Anda
After successful installation, you can begin using your DD Audio RL-M speakers.
- Kuasa Permulaan: Reconnect the vehicle's battery. Turn on your head unit and amplebih hidup.
- Pelarasan Kelantangan: Start with the volume at a low level and gradually increase it to a comfortable listening level.
- Tempoh Pecah Masuk: Allow a break-in period of several hours of normal listening to allow the speaker components to loosen and perform optimally.
- Tetapan Crossover: Jika menggunakan alat luaran amplifier with crossover settings, ensure the speakers are receiving an appropriate frequency range for midrange reproduction (e.g., high-pass filter set around 80-100 Hz, low-pass filter around 3-5 kHz, depending on system design).
6. Penyelenggaraan
Penjagaan yang betul akan memastikan ketahanan dan prestasi pembesar suara anda.
- Pembersihan: Use a soft, dry cloth to gently wipe dust from the speaker cones and grills. Avoid using harsh chemicals or abrasive cleaners.
- Pemeriksaan: Periodically inspect speaker surrounds and cones for any signs of damage or wear.
- Perlindungan Alam Sekitar: Protect speakers from direct exposure to water, extreme heat, or cold, which can degrade materials over time.
7. Penyelesaian masalah
If you encounter issues with your speakers, refer to the following common troubleshooting steps.
7.1 Tiada Bunyi daripada Pembesar Suara
- Semak Pendawaian: Ensure all speaker wires are securely connected to both the speaker terminals and the amplifier/head unit, and that polarity is correct.
- Amplifier/Head Unit: Sahkan bahawa anda amplifier is powered on and functioning correctly. Check head unit settings (e.g., fader, balance, mute).
- Sekering: Inspect fuses on your ampliifier dan unit kepala.
7.2 Bunyi Herot
- Tahap Kelantangan: Kurangkan kelantangan. Herotan sering berlaku apabila amppembesar atau pembesar suara terlampau.
- Tetapan Keuntungan: Semak tetapan gandaan pada anda amplifier. If set too high, it can cause distortion.
- Tetapan Crossover: Incorrect crossover settings can send frequencies outside the speaker's optimal range, leading to distortion. Adjust as needed.
- Sambungan longgar: Ensure all wiring connections are tight.
- Kerosakan pembesar suara: Periksa kon dan sekeliling pembesar suara untuk sebarang kerosakan fizikal.
7.3 Bunyi Tidak Seimbang (Satu Pembesar Suara Lebih Keras/Lembut)
- Baki/Pudar: Periksa tetapan imbangan dan fader pada unit kepala anda.
- Pendawaian: Verify that wiring for both speakers is identical and correctly connected.
8. Spesifikasi
Detailed technical specifications for the DD Audio RL-M 6.5" Midrange Speakers.
| Ciri | Spesifikasi |
|---|---|
| Saiz Pembesar Suara | 6.5 Inci |
| Jenis Pembesar Suara | Julat pertengahan |
| Pengendalian Kuasa RMS | 65 - 225 Watt |
| Impedans | 4 Ohm (S4) |
| Respons Kekerapan | 75 - 20,000 Hz |
| Sensitivity (dBSPL) | 88 |
| Voice Coil Diameter (VCD) | 25 mm |
| Diameter Pemasangan | 5.6 Inci (143 mm) |
| Kedalaman Pemasangan | 2.3 Inci (58.5 mm) |
| Bahan Gegelung Suara | Kapton Former with CCA Wire |
| Bahan Kon | Vacuum Formed Polypropylene |
| Bahan keliling | Getah |
| Bahan Bingkai | StampEd Steel |
| Komponen yang Disertakan | 2 x Speaker, 2 x Grills |
| Berat Barang | 6 paun |
9. Waranti dan Sokongan
The DD Audio RL-M speakers come with a Waranti Terhad. Specific terms and conditions of the warranty are provided at the time of purchase or can be obtained from the manufacturer.
For technical support, warranty claims, or further assistance, please contact DD Audio customer service or refer to their official webtapak. Simpan bukti pembelian anda untuk pengesahan waranti.





