1. Pengenalan dan Lebihview
This manual provides essential information for the proper installation, operation, and maintenance of your DD Audio VO-MN310-S4 10-inch Pro Audio Neo Midrange Speaker. The VO-MN310-S4 is engineered for high efficiency and broad bandwidth, featuring a supercharged Neodymium ring magnet and an ultralight long fiber pulp cone. It is designed to deliver precise audio reproduction, particularly in vocal and tweeter frequency ranges, and is suitable for challenging environments such as motorcycles, boats, and UTVs.
Rajah 1: Depan view of the DD Audio VO-MN310-S4 Midrange Speaker.
2. Ciri-ciri Produk
- Bahan kerucut: Treated Long Fiber Paper Cone with Cloth Surround for durability and sound quality.
- Respons Kekerapan: Wide bandwidth from 70Hz to 14KHz for detailed audio reproduction.
- Gegelung Suara: 38mm (1.5-inch) Vented Kapton Former with Copper Clad Aluminum (CCA) wire.
- Magnet System: Main Neodymium Ring Magnet with a Supercharged Neo Ring for high efficiency.
- Reka bentuk Motor: Low Inductance/Distortion Faraday Shorting Ring Motor for improved sound clarity.
- Former Cap: Ultralight design extends upper frequency response.
3. Spesifikasi Teknikal
Rajah 2: Belakang view of the DD Audio VO-MN310-S4 Midrange Speaker, highlighting the magnet and terminals.
| Parameter | Nilai |
|---|---|
| Saiz Pembesar Suara | 10 inci |
| Pengendalian Kuasa RMS | 200 Watt |
| Impedans | 4 Ohm (S4) |
| Voice Coil Diameter (VCD) | 1.5 inci (38mm) |
| Respons Kekerapan | 70 Hz - 14 kHz |
| Frekuensi Resonan (Fs) | 63 Hz |
| Q Mekanikal (Qms) | 5.48 |
| Q Elektrik (Qes) | 0.5 |
| Jumlah Q (Qts) | 0.45 |
| Isipadu Setara (Vas) | 48.48 Liter |
| Sensitivity (dBSPL) | 100 dB |
| Produk BL (BL) | 8.8 TM |
| Lawatan Linear (Xmax) | 5 mm |
| Perjalanan Penggantungan | 15 mm |
| Diameter Pemasangan | 9.25 inci (233 mm) |
| Kedalaman Pemasangan | 3.75 inci (95 mm) |
| bahan | Aluminium (bingkai) |
| Berat Barang | 4 paun |
| Tahap Ketahanan Air | Tahan Air |
Rajah 3: Pro sampinganfile of the DD Audio VO-MN310-S4 Midrange Speaker, illustrating mounting depth.
4. Persediaan dan Pemasangan
Proper installation is crucial for optimal performance and longevity of your speaker. It is highly recommended that installation be performed by a qualified professional car audio technician. Incorrect wiring or mounting can damage the speaker, amppenyangga, atau sistem elektrik kenderaan.
4.1 Pemasangan
- Ensure the mounting location provides sufficient depth and diameter as specified in Section 3.
- Use appropriate mounting hardware to secure the speaker firmly. Avoid over-tightening, which can distort the speaker frame.
- Ensure the mounting surface is rigid and free from obstructions.
4.2 Pendawaian
- Sambungkan pembesar suara ke a amplifier capable of delivering 200 Watts RMS at 4 Ohms.
- Observe correct polarity (+ to + and - to -) when connecting the speaker to the amplifier. Incorrect polarity can lead to reduced sound quality and imaging.
- Use high-quality speaker wire of adequate gauge to minimize power loss and ensure proper current delivery.
- Pastikan semua sambungan selamat dan terlindung untuk mengelakkan litar pintas.
4.3 Tetapan Crossover
As a midrange speaker, the VO-MN310-S4 is designed to reproduce frequencies within the 70Hz to 14KHz range. It is essential to use an external crossover (either active or passive) to filter out frequencies outside this range.
- Set a high-pass filter (HPF) at or above 70Hz to protect the speaker from damaging low frequencies.
- Set a low-pass filter (LPF) at or below 14KHz to integrate smoothly with tweeters in a multi-speaker system.
- Rujuk anda amplifier or head unit's manual for specific crossover adjustment procedures.
5. Arahan Operasi
Once installed, proper operation ensures the best sound quality and extends the life of your speaker.
- Amplifier Gain Setting: Carefully set the gain on your amplifier. Start with the gain at minimum and slowly increase it until the desired volume is achieved without distortion. Over-driving the amplifier (clipping) can severely damage the speaker.
- Kawalan Kelantangan: Use your head unit's volume control for daily adjustments. Avoid operating the system at maximum volume for extended periods if distortion is present.
- Tempoh Pecah Masuk: Allow a break-in period of approximately 20-30 hours of normal listening before evaluating the speaker's full performance. This allows the suspension components to loosen and reach their optimal compliance.
- Pertimbangan Alam Sekitar: While the speaker is water-resistant, avoid direct exposure to high-pressure water jets or prolonged submersion. Ensure proper ventilation around the speaker and amplebih hidup.
6. Penyelenggaraan
Regular, simple maintenance can help preserve the appearance and performance of your DD Audio speaker.
- Pembersihan: Gunakan yang lembut, kering, atau sedikit damp cloth to wipe down the speaker frame and cone. Avoid using harsh chemicals, solvents, or abrasive cleaners.
- Pemeriksaan: Periodically inspect the speaker for any signs of damage to the cone, surround, or connections. Ensure mounting screws remain tight.
- Perlindungan Alam Sekitar: If installed in an open-air environment (e.g., boat, UTV), consider using protective covers when the vehicle is not in use to shield from prolonged sun exposure or heavy moisture.
7. Penyelesaian masalah
If you experience issues with your speaker, refer to the following common troubleshooting steps.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada Bunyi dari Pembesar Suara |
|
|
| Bunyi Herot |
|
|
| Bunyi Lemah atau Terkedu |
|
|
8. Waranti dan Sokongan
The DD Audio VO-MN310-S4 speaker comes with a Waranti Terhad. Specific terms and conditions of the warranty are provided at the time of purchase or can be obtained by contacting DD Audio directly.
For technical support, warranty claims, or further assistance, please contact DD Audio customer service through their official website or authorized dealer. Please have your product model number (VO-MN310-S4) and proof of purchase available when seeking support.
