1. Pengenalan
This manual provides essential instructions for the safe and efficient operation of your OVONIC Mate2 LiPo Balance Charger. Please read this manual thoroughly before using the charger to ensure proper function and to prevent damage to the charger or batteries.
2. Arahan Keselamatan
Failure to follow these safety instructions can result in fire, personal injury, or property damage.
- Always use the charger in a well-ventilated area, away from flammable materials.
- Jangan biarkan pengecas tanpa pengawasan semasa operasi.
- Ensure the charger is compatible with the battery type and cell count before connecting.
- Jangan cas bateri yang rosak, bengkak atau bocor.
- Keep the charger away from moisture, dust, and direct sunlight.
- Use only the original power cable and accessories provided with the charger.
- Disconnect the power supply immediately if any abnormal behavior is observed.
- Jauhkan daripada kanak-kanak.
- The charger is designed for AC input only. Do not attempt to connect to a DC power source.
Figure 2.1: OVONIC Mate2 Charger highlighting safety protections and dimensions. This image illustrates the physical dimensions of the charger and icons representing its built-in safety features such as overtemperature, overcharge, overcurrent, short circuit, and reverse polarity protection.
3. Kandungan Pakej
Sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:
- OVONIC Mate2 Balance Charger
- Kabel Input AC
- 8-in-1 Adapter Cable (XT60 to EC5, EC3, XT30, Deans, TRX, TMY, Mini TMY, Futaba)
- LiPo Safe Bag
- Manual Pengguna
Figure 3.1: All items included in the OVONIC Mate2 Charger package. This image displays the charger unit, AC power cable, 8-in-1 adapter cable, LiPo safe bag, and user manual.
4. Produk Lebihview
The OVONIC Mate2 is a smart AC balance charger designed for various RC battery types. It features a high-definition digital display and intuitive controls for efficient and safe charging.
4.1 Ciri-ciri Utama
- Output Kuasa Tinggi: 200W charging power with 12A maximum current.
- Keserasian Berbilang Bateri: Supports LiPo, Li-ion, LiHV, LiFe (2-6S), and NiMH (4-15S) batteries.
- Kecekapan Penukaran Tinggi: Up to 98% conversion efficiency using synchronous rectification technology.
- Smart Charging Modes: Fast Charge, Balance Charging, Discharge, Storage Mode, and Digital Power.
- Perlindungan Keselamatan Komprehensif: Overtemperature, Overcharge, Overcurrent, Short Circuit, and Reverse Polarity Protection.
- Antara Muka Mesra Pengguna: Digital display for clear parameter monitoring and easier operation.
Figure 4.1: Comparison illustrating the clearer parameters and easier operation of the Mate2's high-definition large screen compared to the Mate1's simpler display.
4.2 Charger Components
Familiarize yourself with the main components of the charger:
- Paparan Digital: Shows charging status, battery parameters, and menu options.
- Butang Kawalan: Butang navigasi dan pilihan untuk operasi menu.
- Main Output Port: For connecting the 8-in-1 adapter cable to the battery.
- Balance Port: For connecting the battery's balance lead (essential for LiPo/Li-ion/LiHV/LiFe batteries).
- Port Input AC: Untuk menyambungkan kabel kuasa AC.
5. Persediaan
- Buka Pembungkusan Pengecas: Keluarkan semua komponen dari pembungkusan dengan berhati-hati.
- Sambungkan Kuasa: Plug the AC input cable into the charger's AC input port, then connect the other end to a suitable wall outlet (100-240V AC). The charger will power on and display the startup screen.
- Prepare Battery: Ensure your battery is in good condition, free from damage, and at room temperature.
- Connect Adapter Cable: Connect the XT60 end of the 8-in-1 adapter cable to the main output port of the charger.
- Sambungkan Bateri:
- For LiPo/Li-ion/LiHV/LiFe batteries: Connect the main discharge plug of your battery to the appropriate connector on the 8-in-1 adapter cable. Then, connect the battery's balance lead to the charger's balance port.
- For NiMH batteries: Connect the main discharge plug of your battery to the appropriate connector on the 8-in-1 adapter cable. A balance connection is not required for NiMH.
Figure 5.1: The 8-in-1 adapter cable, showing its XT60 input and various output connectors including XT30, EC3, EC5, Deans, TMY, Mini TMY, Futaba, and TRX.
6. Arahan Operasi
The OVONIC Mate2 charger offers several operating modes. Use the navigation buttons to select and confirm options on the digital display.
6.1 Supported Battery Types and Cell Counts
The charger supports the following battery chemistries and cell configurations:
| Jenis Bateri | Voltage Julat | Kiraan Sel Bateri |
|---|---|---|
| LiPo | 7.4V-22.2V | 2–6S |
| Li-ion | 7.4V-22.2V | 2–6S |
| LiHV | 6.4V-19.2V | 2–6S |
| Kehidupan | 7.6V-21.6V | 2–6S |
| NiMH | 14.4V-57.6V | 4–15S |
Table 6.1: Supported battery types, voltage ranges, and cell counts for the OVONIC Mate2 charger.
Figure 6.1: The OVONIC Mate2 charger in operation, demonstrating its compatibility with various battery types as detailed in the accompanying table.
6.2 Basic Charging Procedure (LiPo/Li-ion/LiHV/LiFe)
- Hidupkan kuasa: Sambungkan pengecas kepada kuasa AC.
- Sambungkan Bateri: Connect the battery's main discharge plug and balance lead to the charger as described in the Setup section.
- Pilih Jenis Bateri: On the charger's display, navigate to select the correct battery type (e.g., LiPo, LiHV).
- Set Cell Count: Confirm or adjust the cell count (e.g., 3S, 4S) to match your battery. This is crucial for safe operation.
- Set Charging Current: Adjust the charging current (Amps) according to your battery's specifications. A common guideline is 1C (e.g., for a 5000mAh battery, set 5.0A).
- Pilih Mod: Choose your desired charging mode (e.g., "Balance Charge" for LiPo batteries, which is highly recommended for longevity and safety).
- Mula Mengecas: Confirm the settings and start the charging process. The display will show real-time charging data.
- Pantau: Periodically check the battery and charger during the charging cycle.
- Selesai: The charger will automatically stop when the battery is fully charged. Disconnect the battery from the charger.
6.3 Basic Charging Procedure (NiMH)
- Hidupkan kuasa: Sambungkan pengecas kepada kuasa AC.
- Sambungkan Bateri: Connect the battery's main discharge plug to the charger. Balance lead connection is not required for NiMH.
- Pilih Jenis Bateri: On the charger's display, navigate to select "NiMH".
- Set Charging Current: Adjust the charging current (Amps) according to your battery's specifications.
- Mula Mengecas: Confirm the settings and start the charging process. The display will show real-time charging data.
- Pantau: Periodically check the battery and charger during the charging cycle.
- Selesai: The charger will automatically stop when the battery is fully charged. Disconnect the battery from the charger.
6.4 Other Modes
- Mod Nyahcas: Used to safely discharge batteries to a lower voltage.
- Mod Storan: Charges or discharges LiPo/Li-ion/LiHV/LiFe batteries to their optimal storage voltage, prolonging battery life.
- Digital Power Mode: Allows the charger to function as a DC power supply for other devices (refer to the on-screen menu for specific voltage/current settings).
7. Penyelenggaraan
- Pembersihan: Clean the charger's exterior with a soft, dry cloth. Do not use solvents or abrasive cleaners.
- Storan: Simpan pengecas di tempat yang sejuk dan kering, jauh daripada cahaya matahari langsung dan kelembapan.
- Pemeriksaan Kabel: Regularly inspect all cables and connectors for signs of wear or damage. Replace damaged cables immediately.
- Kemas kini Firmware: Semak pengeluar webtapak untuk sebarang kemas kini perisian tegar yang tersedia untuk memastikan prestasi dan keserasian optimum.
8. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pengecas tidak dihidupkan. | Tiada bekalan kuasa; kabel rosak. | Check AC power connection; try a different outlet; inspect AC cable for damage. |
| Charging error message. | Incorrect battery type/cell count selected; poor connection; damaged battery. | Verify battery type and cell count settings; ensure all connections are secure; inspect battery for damage. |
| Battery not balancing correctly. | Balance lead not connected or faulty; damaged battery cells. | Ensure balance lead is securely connected; try a different balance lead if possible; if cells are severely unbalanced, the battery may be damaged. |
| Pengecas menjadi terlalu panas. | Poor ventilation; charging at too high a current. | Ensure adequate airflow around the charger; reduce charging current. |
9. Spesifikasi
- Input Voltage: AC 100-240V
- Kuasa Caj: 200W
- Caj Arus: 0.1-12.0A
- Kuasa Nyahcas: 10W
- Arus Nyahcas: 0.1-2.0A
- Baki Semasa: 1.0A/Cell
- Jenis Bateri yang Disokong: LiPo/Li-ion/LiHV/LiFe (2-6S), NiMH (4-15S)
- Dimensi: 154 x 80 x 46 mm (6.1 x 3.15 x 1.81 inci)
- Berat: Kira-kira 0.72 kg (1.58 lbs)
Rajah 9.1: Terperinci view of the OVONIC Mate2 charger, illustrating its internal structure, precise dimensions, and the various protection mechanisms integrated into its design.
10. Waranti dan Sokongan
OVONIC provides a Waranti Kualiti 2 Tahun for the Mate2 LiPo Balance Charger.
For any product problems or support inquiries, please contact OVONIC customer service:
- Access your Amazon "Your Orders" page.
- Locate your OVONIC Mate2 Charger order.
- Click the "Contact Seller" option.
- OVONIC customer service aims to respond within 24 hours.
Sila simpan resit pembelian anda untuk tuntutan waranti.
