Manual Pengguna Pam Diafragma Lembut Cucian Polipropilena Annovi Reverberi AR45LFP-GR-GCI

1. Pengenalan dan Lebihview

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Annovi Reverberi AR45LFP-GR-GCI Polypropylene Softwash Diaphragm Pump. This semi-hydraulic, low-pressure, three-diaphragm pump is designed for fluid transfer and spraying of various chemicals and solutions, suitable for applications suchs as lawn and turf care, agriculture, tree spraying, pressure washing, and roof cleaning.

Figure 1: Annovi Reverberi AR45LFP-GR-GCI diaphragm pump, featuring its red polypropylene housing, black pump head, and clear oil reservoir.

Key features include a 3/4" hollow shaft for seamless power source connection, a flow rate of up to 11.4 GPM, and a maximum pressure of 290 PSI. Constructed with durable polypropylene and Viton o-rings, it ensures longevity and resistance to harsh environmental conditions.

2. Maklumat Keselamatan

Read and understand all safety instructions before operating the pump. Failure to follow these instructions may result in serious injury or property damage.

• Always wear appropriate personal protective equipment (PPE) such as eye protection and gloves when handling chemicals or operating the pump.
• Ensure the pump is securely mounted before operation to prevent movement or vibration.
• Verify all connections (inlet, outlet, shaft) are tight and leak-free before starting the pump.
• Do not exceed the maximum rated pressure or flow rate of the pump.
• Never operate the pump dry. Ensure there is a constant supply of liquid to prevent damage.
• Putuskan sambungan kuasa sebelum melakukan sebarang penyelenggaraan atau pelarasan.
• Dispose of chemicals and waste materials according to local regulations.

3. Ciri-ciri Produk

The Annovi Reverberi AR45LFP-GR-GCI pump incorporates several design elements for reliable performance:

• Aliran Maks: GPN 11.4
• Tekanan Maks: 290 PSI
• Saluran masuk / keluar: 1 1/4" Inlet / 1" Outlet
• Suhu Maks: 140 Darjah F
• Jenis aci: 3/4" Hollow Shaft
• Keperluan Kuasa: 2.1 HP / 550 RPM
• Semi-hydraulic three-diaphragm design for smoother operation and reduced pulsation.
• Parts in contact with liquids are reinforced polypropylene, Kynar, and AISI 316 L for chemical resistance.
• Diaphragms made of BlueFlex and Viton for durability.
• Splash lubricated oiling system with a clear oil tank for visual level checking.
• Piston and ring design provides an efficient "oil cushion" system to protect diaphragms.
• Spherical sector profile valves offer lower flow resistance and improved volumetric efficiency.
• Heavy-duty mounting rails with AISI 304 SST fasteners.

4. Spesifikasi

5. Persediaan dan Pemasangan

1. Pemasangan: Securely mount the pump using the heavy-duty mounting rails. Ensure the mounting surface is stable and capable of supporting the pump's weight and operational vibrations.
2. Sambungan Aci: Connect the 3/4" hollow shaft of the pump to your power source (e.g., internal combustion engine, hydraulic motor via gearbox or pulley fixtures). Ensure a proper and secure fit to prevent damage during operation.
3. Sambungan masuk: Connect the 1 1/4" inlet to your fluid supply line. Use appropriate fittings and ensure all connections are tight to prevent air leaks, which can affect pump performance.
4. Sambungan Outlet: Connect the 1" outlet to your discharge line or spraying equipment. Verify all connections are secure and rated for the maximum operating pressure.
5. Pemeriksaan Paras Minyak: Before first use, and periodically thereafter, check the oil level in the clear oil tank. The oil level should be within the recommended range. Refer to the manufacturer's guidelines for the correct type and amount of oil.
6. Gauge Installation (Optional): If a pressure gauge is required, it must be purchased separately and installed according to its specific instructions.

6. Arahan Operasi

1. Perdana Pam: Ensure the pump is fully primed with liquid before starting. Operating the pump dry can cause severe damage to the diaphragms and other internal components.
2. Start Power Source: Gradually start the power source connected to the pump shaft. Allow the pump to reach its operating RPM (550 RPM) smoothly.
3. Monitor Pressure and Flow: Observe the pressure gauge (if installed) and the flow rate. The pump is designed to deliver up to 290 PSI and 11.4 GPM. Adjust the power source or system valves as needed to achieve desired operational parameters within the pump's limits.
4. Operasi Berterusan: Maintain a consistent supply of fluid to the inlet during operation. Avoid sudden changes in pressure or flow.
5. Tutup: To stop the pump, gradually reduce the power source RPM and then turn off the power. Close any necessary valves in the fluid lines.
6. Sistem longkang: After use, especially when pumping corrosive chemicals or before storage in freezing temperatures, drain the pump and system thoroughly. Flush with clean water if necessary.

7. Penyelenggaraan

Regular maintenance is crucial for extending the life and ensuring the optimal performance of your AR45LFP-GR-GCI pump.

• Tahap Minyak: Check the oil level in the clear reservoir before each use. Replenish or change oil according to the manufacturer's schedule and specifications.
• Pemeriksaan Diafragma: Periodically inspect the BlueFlex and Viton diaphragms for signs of wear, cracking, or damage. Replace diaphragms as needed to prevent leaks and maintain efficiency. The three-diaphragm design and "oil cushion" system help protect them, but regular checks are still important.
• Pemeriksaan Injap: Inspect the spherical sector profile valves for debris or wear that could impede flow or reduce volumetric efficiency. Clean or replace as necessary.
• Integriti Sambungan: Regularly check all hose and pipe connections for tightness and signs of leakage. Tighten or replace fittings as required.
• Pembersihan: After using corrosive or viscous liquids, flush the pump with clean water to prevent buildup and corrosion.
• Storan: When storing the pump for extended periods, especially in cold climates, ensure it is thoroughly drained and protected from freezing.

8. Penyelesaian masalah

9. Waranti dan Sokongan

For warranty information, technical support, or to purchase replacement parts, please contact American Pressure Inc., the distributor of Annovi Reverberi products.

Refer to your purchase documentation or the American Pressure Inc. weblaman web untuk terma jaminan khusus dan butiran perhubungan.

Pengeluar: AR North America, Inc.
Diedarkan oleh: American Pressure Inc.