VECYS Bottom Loading Water Dispenser User Manual

1. Pengenalan

Thank you for choosing the VECYS Bottom Loading Water Dispenser. This manual provides important information regarding the installation, operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before use and retain it for future reference.

This water dispenser is designed to provide hot, cold, and room temperature water from 3 or 5-gallon water bottles, featuring a convenient bottom-loading design, child safety lock, and a self-cleaning function.

2. Maklumat Keselamatan

WARNING: To reduce the risk of injury and property damage, you must read this entire guide before assembling, installing, and operating the dispenser.

• Always place the dispenser on a level surface.
• Do not operate the dispenser with a damaged power cord or plug.
• Ensure the dispenser is properly grounded.
• Jauhkan dispenser daripada cahaya matahari langsung dan sumber haba.
• Jangan rendam dispenser, kord atau palam dalam air atau cecair lain.
• Cabut plag dispenser sebelum membersihkan atau melakukan sebarang penyelenggaraan.
• The hot water faucet is equipped with a child safety lock. Always engage the lock when not in use to prevent accidental hot water dispensing.
• Perkakas ini tidak dimaksudkan untuk digunakan oleh orang (termasuk kanak-kanak) yang kurang keupayaan fizikal, deria, atau mental, atau kurang pengalaman dan pengetahuan, melainkan mereka telah diberi pengawasan atau arahan mengenai penggunaan perkakas oleh orang yang bertanggungjawab untuk keselamatan mereka .

3. Produk Lebihview

Rajah 3.1: Depan view of the VECYS Bottom Loading Water Dispenser.

Rajah 3.2: Sisi view of the VECYS Water Dispenser showing key features and dimensions (40.8in H x 14.2in W x 12.2in D).

Komponen Utama:

• Panel Kawalan: Features LED indicators for power, heating, and cooling status.
• Dispensing Faucets: Separate faucets for hot, room temperature, and cold water.
• Kunci Keselamatan Kanak-kanak: Located on the hot water faucet.
• Dulang Drip: Boleh ditanggalkan untuk memudahkan pembersihan.
• Bottom Loading Compartment: Houses the 3 or 5-gallon water bottle.
• Kord Kuasa: Untuk sambungan elektrik.

4. Persediaan

4.1 Membongkar

• Tanggalkan dispenser daripada pembungkusannya dengan berhati-hati.
• Periksa unit untuk sebarang kerosakan penghantaran. Jika rosak, jangan kendalikan dan hubungi khidmat pelanggan.
• Remove all packaging materials, including any protective films or tapes.

4.2 Penempatan

Figure 4.1: The water dispenser can be placed in various indoor environments such as offices or homes.

• Place the dispenser on a hard, level surface that can support its weight when full.
• Ensure there is at least 4 inches of clearance from the back and sides of the dispenser to a wall to allow for proper ventilation.
• Avoid placing the dispenser in direct sunlight or near heat-generating appliances.
• Do not place the dispenser in an enclosed area or cabinet.

4.3 Water Bottle Installation (Bottom Loading)

1. Open the lower cabinet door of the dispenser.
2. Remove the cap from a new 3 or 5-gallon water bottle.
3. Insert the water intake tube (probe) into the opening of the water bottle. Ensure the tube reaches the bottom of the bottle.
4. Slide the water bottle into the lower cabinet.
5. Tutup pintu kabinet dengan selamat.

4.4 Initial Priming and First Use

1. After installing the water bottle, plug the dispenser into a grounded electrical outlet.
2. Allow the dispenser to sit for at least 5 minutes before turning on the heating or cooling functions. This allows water to fill the internal reservoirs.
3. Dispense water from all three faucets (hot, room temperature, cold) until water flows steadily. This purges any air from the lines.
4. Turn on the hot and cold water switches located on the back of the unit (if applicable). The corresponding LED indicators on the front panel will illuminate.
5. Allow approximately 15-20 minutes for the water to reach optimal hot and cold temperatures before first use.

5. Arahan Operasi

5.1 Pengeluaran Air

Figure 5.1: The dispenser offers hot, normal (room temperature), and cold water options.

Figure 5.2: Visual representation of hot water for beverages, fresh (room temperature) water, and cold water for refreshment.

• Air Panas: Push the child safety lock button inward, then press the hot water lever. Release the lever to stop dispensing.
• Air Suhu Bilik: Press the room temperature water lever. Release the lever to stop dispensing.
• Air Sejuk: Press the cold water lever. Release the lever to stop dispensing.

5.2 Kunci Keselamatan Kanak-kanak

Figure 5.3: The child safety lock (red button) and LED indicators for heating and chilling.

The hot water faucet is equipped with a two-step child safety lock. To dispense hot water, you must first push the red safety button inward and then press the hot water lever. This mechanism helps prevent accidental burns.

5.3 Penunjuk LED

The control panel features LED lights that indicate the status of the dispenser:

• Penunjuk Kuasa: Bercahaya apabila unit dihidupkan.
• Penunjuk Pemanasan: Illuminates when the hot water heating element is active.
• Penunjuk Penyejukan: Illuminates when the cold water cooling system is active.
• Water Bottle Empty Indicator: Illuminates when the water bottle in the bottom compartment is empty and needs replacement.

6. Penyelenggaraan

6.1 Fungsi Pembersihan Kendiri

This dispenser features an interior UV light for a self-clean function. Refer to the specific instructions provided with your unit for activating this cycle. Regular use of the self-clean function helps maintain water quality and prevent bacterial growth.

6.2 Pembersihan Luaran

• Unplug the dispenser from the power outlet before cleaning.
• Lap permukaan luar dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
• Remove and empty the drip tray regularly. Wash it with mild soap and water, then rinse thoroughly and dry before reinserting.

6.3 Draining the Unit

If the dispenser will not be used for an extended period or needs to be moved, it should be drained:

1. Cabut plag dispenser dan keluarkan botol air.
2. Place a bucket under the drain plug located at the back of the unit.
3. Tanggalkan palam longkang untuk membolehkan semua air mengalir keluar dari takungan.
4. Setelah disalirkan, pasangkan palam saliran dengan selamat.

7. Penyelesaian masalah

8. Spesifikasi

9. Waranti dan Sokongan

The VECYS Bottom Loading Water Dispenser (Model BY607WP) is backed by a Waranti 1 tahun from the date of purchase. This warranty covers manufacturing defects and ensures the product's reliability under normal use.

For warranty claims, technical assistance, or any questions regarding your product, please contact VECYS customer support. Please have your model number (BY607WP) and proof of purchase available when contacting support.