Quick Sense QS-M9 Microwave Motion Sensor User Manual

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of the Quick Sense QS-M9 Microwave Motion Sensor. This device is designed to detect motion and automatically control connected lighting or other electrical devices, enhancing energy efficiency and security in various indoor and outdoor environments. Please read this manual thoroughly before installation and use.

The QS-M9 sensor offers 360° detection, adjustable time delay, and ambient light sensitivity, making it a versatile solution for automated lighting control.

2. Kandungan Pakej

Setelah membuka bungkusan, sila pastikan semua komponen berikut ada:

• Quick Sense QS-M9 Microwave Motion Sensor (Full Body)
• Skru Pemasangan
• Manual Pengguna (dokumen ini)

3. Maklumat Keselamatan

AMARAN: Installation should only be performed by a qualified electrician in accordance with all local electrical codes and regulations. Disconnect power at the circuit breaker before installing or servicing the sensor.

• Do not exceed the specified load capacity of the sensor.
• Pastikan pembumian yang betul untuk mengelakkan kejutan elektrik.
• Jauhkan peranti daripada air dan suhu yang melampau.

4. Pemasangan

4.1 Lokasi Pemasangan

The QS-M9 is a surface-mounted sensor. For optimal performance, consider the following:

• Ketinggian Pemasangan yang Disyorkan: 2.2 to 6 meters.
• Julat Pengesanan: Up to 10 meters (360° coverage). Avoid placing the sensor near large metal objects or moving machinery that could interfere with microwave signals.
• Ensure a clear line of sight for the desired detection area, although microwave sensors can detect through thin non-metallic materials like drywall or glass.

4.2 Gambarajah Pendawaian

Refer to the diagram below for correct wiring connections. Ensure power is disconnected before proceeding.

Imej: Detailed wiring diagram for the Quick Sense QS-M9 sensor, showing connections for L (Live), N (Neutral), L' (Switched Live Output), and 1-10V dimming output terminals. It also labels the Antenna Module, Day/Light Sensor, LED Indication, and DIP switch settings for Stand by dimming level, Stand by period, Day/Light Sensor, Hold Time, and Detection Range.

1. Connect the Live (L) wire from the power supply to the 'L' terminal on the sensor.
2. Connect the Neutral (N) wire from the power supply to the 'N' terminal on the sensor.
3. Connect the Switched Live (L') output from the sensor to the Live input of your lighting fixture or controlled device.
4. Connect the Neutral (N) wire from your lighting fixture or controlled device to the 'N' terminal on the sensor (or directly to the main neutral line).
5. If using 1-10V dimming, connect the '+' and '-' terminals of the sensor's 1-10V output to the corresponding input on your dimmable LED driver.

5. Operasi dan Tetapan

The Quick Sense QS-M9 sensor features adjustable settings via DIP switches to customize its behavior. The DIP switches are located on the side of the unit.

Imej: An illustration detailing the DIP switch panel on the Quick Sense QS-M9 sensor, explaining the functions of each set of switches: Detection Range, Hold Time, Daylight Sensor, Stand-by Period, and Stand-by Mode & Dimming Level.

5.1 Fungsi Suis DIP

Adjust the red switches to the desired positions according to the labels for each function:

• Detection Range (Sensitivity): Adjusts the area within which motion is detected. This can be set with different combinations of DIP switches to precisely fit specific application requirements.
• Hold Time (Time Delay): This is the duration the connected lamp remains at 100% brightness after motion is detected and then ceases. Settings typically range from 10 seconds to 30 minutes.
• Daylight Sensor (LUX Setting): Determines the ambient light level at which the sensor will activate. For example, if set to 3 LUX, the sensor will only activate the light when the ambient light is below 3 LUX (i.e., dark conditions). Settings range from <3 LUX to 2000 LUX.
• Tempoh Tunggu Sedia: This defines the duration the light remains at a low output (dimmed level) after the Hold Time has expired, but before switching off completely in the prolonged absence of a person.
• Stand-by Mode & Dimming Level: This setting defines the dimming percentage (e.g., 10%, 20%, 30%) for the Stand-by Period.

Refer to the specific markings on your device's DIP switch panel for exact switch combinations and their corresponding values.

Imej: A visual representation of the four-stage dimming process controlled by the Quick Sense QS-M9 sensor: Stage 1 (No presence, light off), Stage 2 (Person enters, light at 100% brightness), Stage 3 (After short time, person leaves, light dims to 50%), and Stage 4 (Light dims further to 30%/20%/10% before turning off completely).

6. Penyelenggaraan

The Quick Sense QS-M9 Microwave Motion Sensor is designed for minimal maintenance. Follow these guidelines to ensure longevity and optimal performance:

• Pembersihan: Gently wipe the sensor's surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the unit.
• Pemeriksaan: Periodically check the sensor for any visible damage or loose connections. If any issues are found, consult a qualified electrician.
• Tiada Bahagian Boleh Diservis Pengguna: The sensor contains no user-serviceable parts. Do not attempt to open or repair the unit yourself, as this will void the warranty and may pose a safety risk.

7. Penyelesaian masalah

If you encounter issues with your Quick Sense QS-M9 sensor, refer to the following common problems and solutions:

8. Spesifikasi

9. Waranti dan Sokongan

9.1 Maklumat Waranti

This product may be eligible for an extended warranty plan, such as the '1 Year Extended Warranty by Onsitego', which can be purchased separately. Please refer to the terms and conditions of any purchased warranty plan for details on coverage and claims.

9.2 Sokongan Pelanggan

For technical assistance, troubleshooting, or any product-related inquiries, please contact Quick Sense Innovations:

• Pengeluar: Quick Sense Innovations
• Alamat: FARIDABAD, HARYANA - 121002, India
• Nombor Perhubungan: 9560248290