pengenalan
This manual provides essential information for the safe assembly, operation, and maintenance of your PASYOU S30B Magnetic Belt-Drive Exercise Bike. Please read this manual thoroughly before using the equipment and retain it for future reference. Proper use and maintenance will ensure optimal performance and longevity of your exercise bike.
Maklumat Keselamatan
Patuhi langkah berjaga-jaga keselamatan berikut untuk mencegah kecederaan dan kerosakan pada peralatan:
- Rujuk doktor sebelum memulakan sebarang program senaman.
- Pastikan semua bolt dan nat diketatkan dengan selamat sebelum setiap penggunaan.
- Place the exercise bike on a flat, stable surface. Use a mat to protect flooring.
- Jauhkan kanak-kanak dan haiwan peliharaan daripada peralatan semasa operasi.
- Pakai pakaian dan kasut senaman yang sesuai. Elakkan pakaian longgar yang boleh tersekat pada bahagian yang bergerak.
- Kapasiti berat pengguna maksimum untuk basikal ini ialah 150 kg (330 lbs).
- Use the emergency brake function immediately if you feel unwell or need to stop quickly.
- Do not attempt to modify the equipment.
Kandungan Pakej
Verify that all components are present and undamaged before assembly. If any parts are missing or damaged, contact customer support.
- Kerangka Utama
- Penstabil Depan
- Penstabil Belakang
- Tiang bar hendal
- Hendal
- Pos Kerusi
- tempat duduk
- Pedal (Kiri dan Kanan)
- Monitor LCD
- Pemegang Tablet
- Pemegang Botol Air
- Kit Perkakasan (bolt, pencuci, nat, alatan)
Persediaan dan Perhimpunan
Assembly typically takes approximately 20-30 minutes. Follow the numbered steps below. All necessary tools are included in the package.
- Pasang Penstabil: Secure the front and rear stabilizers to the main frame using the provided bolts and washers. Ensure they are firmly tightened.
- Pasang Pedal: Identify the left (L) and right (R) pedals. The left pedal screws counter-clockwise, and the right pedal screws clockwise. Tighten them securely to the crank arms.
- Tempat duduk Gunung: Attach the seat to the seat post, then insert the seat post into the main frame. Do not tighten the adjustment knob yet.
- Pasang Hendal: Attach the handlebars to the handlebar post. Connect any sensor wires if present. Insert the handlebar post into the main frame. Do not tighten the adjustment knob yet.
- Pasangkan Monitor LCD dan Pemegang Tablet: Secure the LCD monitor to the handlebar assembly. Connect the sensor wires from the main frame to the monitor. Attach the tablet holder above the monitor.
- Install Water Bottle Holder: Attach the water bottle holder to the designated area on the main frame.
- Pemeriksaan Akhir: Ensure all connections are secure and the bike is stable. Adjust the leveling stoppers on the stabilizers if the floor is uneven.

Image: Fully adjustable dimensions for various user heights and inseam lengths.
Arahan Operasi
Adjusting Seat and Handlebars
The PASYOU S30B offers 4-way seat adjustment (up/down, forward/backward) and 2-way handlebar adjustment (up/down) to accommodate users with different heights (150cm-190cm / 4.92ft-6.23ft) and inseam lengths (70cm-92cm / 27.5in-36.2in).
- To adjust the seat or handlebars, loosen the corresponding adjustment knob, move the component to the desired position, and then firmly tighten the knob.
- Ensure the seat is at a height where your knee has a slight bend at the bottom of the pedal stroke.

Image: Seat and handlebar adjustment points for personalized fit.
Melaraskan Rintangan Magnet
The bike features a micro-adjustable magnetic resistance system for a smooth and quiet workout.
- Turn the red resistance knob clockwise to increase resistance, making pedaling harder.
- Turn the red resistance knob counter-clockwise to decrease resistance, making pedaling easier.
- The magnetic resistance system provides a wide range of intensity levels suitable for beginners to advanced users.

Image: Resistance adjustment knob and emergency brake function.
Menggunakan Monitor LCD
The integrated LCD monitor tracks your workout data. It requires 2 AAA batteries (not included).
- Fungsi: The monitor displays Time, Speed, RPM (Revolutions Per Minute), Distance, Calories Burned, and Odometer.
- Mod SCAN: The monitor will automatically cycle through all functions, displaying each for a few seconds.
- Butang Mod: Press the 'MODE' button to select a specific function to display continuously or to activate SCAN mode.
- Tetapkan semula: Press and hold the 'MODE' button for a few seconds to reset all values (except Odometer).
- Auto Hidup/Mati: The monitor will turn on automatically when activity is detected or a button is pressed. It will turn off after a few minutes of inactivity.

Image: LCD monitor displaying workout data with an iPad on the holder.
Hentian Kecemasan
For immediate cessation of the flywheel, firmly press down on the red resistance knob. This acts as an emergency brake.
Penyelenggaraan
Penyelenggaraan berkala memastikan ketahanan dan operasi basikal senaman anda yang selamat.
- Pembersihan: Lap basikal dengan iklanamp kain selepas setiap penggunaan untuk mengeluarkan peluh dan habuk. Elakkan pembersih yang kasar.
- Pemeriksaan: Periksa semua bolt, nat dan bahagian bergerak secara berkala sama ada ketat dan haus. Ketatkan sebarang pengikat yang longgar.
- Pemacu tali pinggang: The belt-drive system is designed to be low-maintenance and does not require lubrication.
- Storan: Simpan basikal di tempat yang kering dan sejuk jauh dari cahaya matahari langsung dan suhu yang melampau.
Menyelesaikan masalah
If you encounter issues with your exercise bike, refer to the following table:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Basikal tidak stabil atau bergoyang | Uneven floor surface; loose stabilizers | Adjust the leveling stoppers on the stabilizers; ensure all stabilizer bolts are tight. |
| Pedaling feels rough or noisy | Loose pedals; internal component issue (rare for magnetic system) | Ensure pedals are securely tightened. If noise persists, contact customer support. |
| Rintangan tidak berubah | Resistance knob not properly engaged or internal mechanism issue | Pastikan tombol rintangan berputar dengan bebas. Jika masalah berterusan, hubungi khidmat pelanggan. |
| Monitor LCD tidak dipaparkan | Bateri mati; sambungan sensor longgar | Replace AAA batteries. Check that sensor wires are securely connected to the monitor. |
Spesifikasi
- model: S30B
- Sistem Pemacu: Pemacu Belt
- Mekanisme Rintangan: Magnet
- Bahan: Keluli Aloi
- warna: Hitam
- Kapasiti Berat Maksimum: 150 Kilogram (330 Paun)
- Dimensi Produk (L x W x H): 100.5 x 50.5 x 110 cm (kira-kira 40 x 20 x 43 inci)
- Berat Barang: 26.5 Kilogram
- Ketinggian Pengguna yang Disyorkan: 150cm - 190cm (4.92ft - 6.23ft)
- Inseam Length Range: 70cm - 92cm (27.5in - 36.2in)
- Sumber Kuasa: Dikuasakan pedal (bukan elektrik)
- Bateri Monitor: 2 x AAA (tidak termasuk)

Imej: Selesaiview of the PASYOU S30B Exercise Bike.
Pengangkutan
The PASYOU S30B is equipped with transport wheels for easy relocation.
- To move the bike, firmly grasp the handlebars.
- Tilt the bike forward until it rests on its front transport wheels.
- Carefully roll the bike to its desired location.
- Lower the bike gently back onto its stabilizers.

Image: Transport wheels for easy movement.
Waranti dan Sokongan
PASYOU offers a one-year free replacement on all parts for new PASYOU bikes. Our customer support team is committed to providing 100% satisfactory solutions and will respond to inquiries within 24 hours.
For any issues, questions, or to claim warranty service, please contact PASYOU customer support through the retailer where you purchased the product or visit the official PASYOU brand store online.
Maklumat Hubungan: Refer to your purchase documentation or the PASYOU brand store for the most current support contact details.





