pengenalan
This manual provides comprehensive instructions for the safe and efficient use of your GLOBE Electric 61000147 62-inch Floor Lamp. Please read this guide thoroughly before assembly and operation, and retain it for future reference. This floor lamp features a matte brass finish and an off-white fabric shade, designed for indoor use.

Image: The GLOBE Electric 61000147 62-inch Floor Lamp.
Arahan Keselamatan Penting
To reduce the risk of fire, electric shock, or injury to persons, please adhere to the following safety guidelines:
- Ensure the power is OFF before installing or replacing the bulb.
- Jangan sambungkan elektrik sehingga lekapan anda dipasang sepenuhnya.
- Produk ini bertujuan untuk kegunaan dalaman sahaja. Jangan dedahkan kepada air atau kelembapan.
- Gunakan hanya jenis mentol dan wat yang ditentukantage (1x E26/Medium Base 60W Max Bulb).
- Do not use with a dimmer switch unless the bulb is specifically rated for dimmable use.
- Jauhkan bahan mudah terbakar daripada sumber cahaya.
- Sentiasa cabut plag lamp from the electrical outlet before cleaning or performing any maintenance.
- Jika kabel atau kord fleksibel luaran luminair ini rosak, ia hendaklah diganti secara eksklusif oleh pengilang atau ejen perkhidmatannya atau orang berkelayakan yang serupa untuk mengelakkan bahaya.
Kandungan Pakej
Verify that all components listed below are present and undamaged before proceeding with assembly. If any parts are missing or damaged, contact customer support.
- Lamp Pangkalan
- Lamp Pole (multiple sections, pre-wired)
- Lamp Shade (off-white fabric)
- Shade Support Ring
- Assembly Tool (if included)

Image: Product packaging showing the GLOBE Electric 61000147 floor lamp.
Arahan Perhimpunan
Follow these steps to assemble your floor lamp. No specialized tools are typically required, though a Phillips head screwdriver may be helpful for some connections.
- Buka Pembungkusan Komponen: Carefully remove all parts from the packaging. Lay them out on a clean, flat surface to ensure all pieces are accounted for.
- Kumpul Lamp tiang: Gently thread the lamp pole sections together, ensuring the electrical cord passes freely through each section. Twist clockwise until securely tightened. Do not overtighten.
- Pasangkan Tiang ke Tapak: Masukkan l yang dipasangamp tiang ke dalam lamp base. Secure it by tightening any screws provided, usually located on the side of the base. Some models may require a small tool (often included) or a Phillips screwdriver.
- Assemble Fabric Shade: The fabric shade is designed for compact packaging. To assemble, gently push the center wire of the shade inwards and then flip the shade around to expand it into its conical shape. Ensure the shade is fully expanded and taut.
- Pasang Shade: Place the assembled fabric shade onto the lamp's bulb holder. The shade is designed to rest securely on the socket or a designated shade support ring.
- Pasang Mentol: Screw one E26/Medium Base 60W Max bulb (sold separately) into the lamp soket. Jangan melebihi wat maksimumtage.

Image: Detailed diagram illustrating key components and features of the lamp, including the shade, bulb type, height, finish, and switch location.

Image: Close-up of the matte brass lamp asas.

Image: Close-up of the off-white fabric shade and the lamp's neck.
Arahan Operasi
- Sambung ke Kuasa: Palamkan lamp's 6-foot clear cord into a standard 120V electrical outlet.
- Hidupkan/Matikan: Cari suis putar pada lamp socket. Rotate the switch clockwise to turn the lamp ON, and counter-clockwise to turn it OFF.

Image: The floor lamp illuminated, demonstrating its operational state.
Penyelenggaraan
- Pembersihan: Sentiasa cabut plag lamp before cleaning. Use a soft, dry cloth to wipe the matte brass finish. For the fabric shade, use a lint roller or a soft brush to remove dust. Do not use abrasive cleaners or solvents.
- Penggantian mentol: Pastikan lamp is unplugged and the bulb has cooled completely before attempting to replace it. Unscrew the old bulb and screw in a new E26/Medium Base 60W Max bulb.
- Penjagaan Kord: Regularly inspect the power cord for any signs of damage. Do not use the lamp jika kordnya terkoyak atau rosak.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lamp tidak menyala. | 1. Lamp tidak dipasang. 2. Bulb is loose or burnt out. 3. Salur keluar kuasa tidak berfungsi. 4. Rotary switch is faulty. | 1. Pastikan kord kuasa dipasang dengan selamat pada soket yang berfungsi. 2. Tighten the bulb or replace it with a new one. 3. Test the outlet with another appliance. Check circuit breaker. 4. Contact customer support if the switch is suspected to be faulty. |
| Cahaya berkelip-kelip. | 1. Mentol longgar. 2. Jenis mentol yang salah. 3. Bekalan kuasa tidak stabil. | 1. Tighten the bulb. 2. Ensure the bulb is E26/Medium Base and within 60W max. 3. Cuba pasangkan lamp ke outlet yang berbeza. |
| Shade appears uneven. | Shade not fully expanded or seated correctly. | Gently adjust the fabric shade to ensure it is fully expanded and rests evenly on the bulb holder. |
Spesifikasi Produk
- Nombor Model: 61000147
- Jenama: GLOBE Electric
- Dimensi (D x W x H): 19"D x 19"W x 62"H (48.3cm D x 48.3cm W x 157.5cm H)
- Berat Barang: 11.2 paun (5.08 kg)
- Jenis Selesai: Loyang Matte
- Bahan asas: logam
- Bahan teduhan: Polyester Fabric (Off-White)
- Pangkalan Mentol: E26 (Asas Sederhana)
- Max Wattage: 60 Watt
- Voltage: 120 Volt
- Jenis Sumber Cahaya: Compatible with LED and Incandescent Bulbs
- Jenis Suis: Rotary Switch (on socket)
- Panjang Kord: 6 kaki (1.82 m)
- Penggunaan Dalaman/Luar: Dalaman Sahaja
- Bilangan Sumber Cahaya: 1

Image: Dimensional diagram of the floor lamp.
Waranti dan Sokongan
This product is sold without an explicit manufacturer's warranty as per available information. For any questions, missing parts, or technical assistance, please contact GLOBE Electric customer support directly or visit their official webtapak.
Kedai Elektrik GLOBE: Visit the GLOBE Electric Store on Amazon





