FLEXISPOT EJ2 Electric Standing Desk Frame Instruction Manual

1. Pengenalan

This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your FLEXISPOT EJ2 Electric Standing Desk Frame. Please read this manual thoroughly before use and retain it for future reference.

The FLEXISPOT EJ2 is a robust and versatile electric standing desk frame designed to support various tabletop sizes, offering a flexible and ergonomic workspace solution. It features dual quiet motors for smooth height adjustments, a memory function to save preferred heights, and an anti-collision system for enhanced safety.

2. Maklumat Keselamatan

• Kapasiti Berat: Do not exceed the maximum load capacity of 100 kg (220 lbs). Overloading can cause damage to the desk and potential injury.
• Bekalan Kuasa: Ensure the desk is connected to a grounded power outlet with the correct voltage. Do not use damaged power cords or adapters.
• Pembersihan: Keep the area around the desk clear during height adjustments to prevent obstructions.
• Kanak-kanak dan Haiwan Kesayangan: Jauhkan kanak-kanak dan haiwan peliharaan daripada meja semasa operasi untuk mengelakkan kemalangan.
• Ciri Anti-Perlanggaran: The desk is equipped with an anti-collision system that automatically stops and reverses if it encounters an obstacle during movement. However, always exercise caution.
• Perhimpunan: Due to the weight of the components, assembly is recommended for two people.
• Penyelenggaraan: Do not attempt to disassemble or repair the desk yourself. Contact customer support for assistance.

3. Kandungan Pakej

Sila sahkan bahawa semua komponen hadir sebelum memulakan pemasangan. Pakej biasanya termasuk:

• Kaki Meja (2)
• Crossbar/Frame (1)
• Kotak Kawalan (1)
• Telefon Bimbit/Panel Kawalan (1)
• Penyesuai Kuasa dan Kabel (1)
• Mounting Hardware (screws, Allen wrenches, etc.)
• Manual Arahan (dokumen ini)

Note: The tabletop is sold separately and is not included with the desk frame.

4. Persediaan dan Pemasangan

Assembly of the FLEXISPOT EJ2 desk frame requires careful attention to detail. It is highly recommended to have two people for assembly due to the weight of the components. An electric drill can expedite the process of attaching the tabletop.

1. Buka Pembungkusan Komponen: Keluarkan semua bahagian dari pembungkusan dengan berhati-hati dan letakkannya di atas permukaan yang bersih dan rata. Semak pada senarai kandungan pakej.
2. Attach Feet to Legs: Secure the foot supports to the bottom of each desk leg using the provided screws.
3. Pasang Palang Palang: Connect the crossbar sections to form the main frame. Ensure the adjustable width mechanism is correctly aligned.
4. Sambungkan Kaki ke Palang: Attach the assembled legs to the crossbar, ensuring all connections are secure.
5. Pasang Kotak Kawalan dan Telefon Bimbit: Mount the control box and handset (control panel) to the underside of the desk frame using the designated screws.
6. Sambungkan Kabel: Connect the motor cables from the legs to the control box, and then connect the handset cable and power cable to the control box.
7. Lampirkan Tabletop: Carefully place your chosen tabletop onto the assembled frame. Align it properly and secure it using screws (ensure screws are appropriate length for your tabletop thickness to avoid damage).
8. Pengurusan Kabel: Use cable ties or management accessories (not included) to organize cables for a tidy and safe workspace.

Image: The FLEXISPOT EJ2 electric standing desk frame, shown without a tabletop, highlighting its robust structure and integrated control panel.

Image: A technical diagram illustrating the dimensions and adjustable ranges of the FLEXISPOT EJ2 desk frame, including height, width, and depth specifications.

5. Arahan Operasi

5.1. Pelarasan Ketinggian

The FLEXISPOT EJ2 features smooth electric height adjustment. Use the up and down arrow buttons on the control panel to raise or lower the desk to your desired height.

• Butang Atas (▲): Tekan dan tahan untuk menaikkan meja.
• Butang Bawah (▼): Tekan dan tahan untuk menurunkan meja.

Image: Two FLEXISPOT EJ2 desk frames, one black and one white, demonstrating the adjustable height range from 70cm to 119cm, along with lift speed (25mm/s) and low noise operation (<50dB).

5.2. Pratetap Memori

The integrated control panel allows you to save up to four preferred height settings for quick adjustments.

1. Laraskan meja pada ketinggian yang diingini menggunakan butang atas/bawah.
2. Press the 'M' or 'Set' button (if available, or indicated by 'i' on some models) followed by one of the numbered preset buttons (1, 2, 3, or 4). The display will confirm the setting.
3. To recall a saved height, simply press the corresponding numbered button (1, 2, 3, or 4). The desk will automatically move to that height.

Image: A close-up of the FLEXISPOT EJ2 control panel, showing the LED display, up/down buttons, and four memory preset buttons (1, 2, 3, 4) for saving preferred desk heights.

5.3. Anti-Collision Function

The EJ2 desk frame is equipped with an obstacle detection system. If the desk encounters a solid object during upward or downward movement, it will automatically stop and reverse slightly to prevent damage or injury.

• The sensitivity of this function can typically be adjusted through the control panel settings (refer to the detailed manual for specific steps, usually involving pressing 'M' and an arrow key).

Image: A FLEXISPOT EJ2 desk demonstrating its anti-collision feature, where the desk automatically stops and slightly reverses when an object (like a cabinet) is detected during downward movement.

5.4. Dual Quiet Motors

The EJ2 frame utilizes dual motors for enhanced stability, faster adjustment speed, and quieter operation. The operating noise level is typically below 50dB, comparable to ambient room sounds, making it suitable for various environments, including quiet offices or homes.

Image: A composite image illustrating the quiet operation of the FLEXISPOT EJ2 desk, with a cat sleeping peacefully on a white desk and a dog sitting calmly next to a black desk, emphasizing the low noise level.

6. Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your FLEXISPOT EJ2 desk frame.

• Pembersihan: Lap rangka meja dengan kain lembut,amp kain. Elakkan menggunakan bahan kimia yang keras atau pembersih yang kasar yang boleh merosakkan kemasan.
• Semak Sambungan: Periksa semua skru dan bolt secara berkala untuk memastikan ia ketat. Ketatkan semula jika perlu.
• Pemeriksaan Kabel: Inspect power and motor cables for any signs of wear or damage. Replace immediately if damage is found.
• Pelinciran: The lifting columns are generally maintenance-free. Do not apply lubricants unless specifically instructed by FLEXISPOT support.

Imej: Jarak dekat views of the FLEXISPOT EJ2 desk frame's rubber pads on the support plate (01) to prevent tabletop friction, and adjustable feet (02) for floor protection and vibration reduction during movement.

7. Penyelesaian masalah

If you encounter issues with your FLEXISPOT EJ2 desk frame, refer to the following common troubleshooting steps:

• Meja Tidak Bergerak:
  • Check if the power cable is securely plugged into both the wall outlet and the control box.
  • Pastikan semua kabel motor disambungkan dengan betul ke kotak kawalan.
  • Try resetting the desk (see 'Reset Procedure' below).
• Uneven Movement or Noise:
  • Verify that the desk is not overloaded and that weight is evenly distributed.
  • Periksa sebarang halangan di bawah atau di sekeliling meja.
  • Pastikan semua skru pemasangan diketatkan.
• Kod Ralat pada Paparan:
  • If an error code appears, consult the detailed manual or contact customer support with the specific code. Often, a reset can resolve minor errors.

7.1. Tetapkan Semula Prosedur

A reset can often resolve minor operational issues. The exact procedure may vary slightly, but generally involves:

1. Cabut kabel kuasa dari salur keluar dinding.
2. Tunggu sekurang-kurangnya 10-15 saat.
3. Pasang semula kabel kuasa.
4. Press and hold the 'Down' button (▼) until the desk reaches its lowest position and slightly bounces, or until the display shows 'RST' or '000'. Release the button.

If problems persist after troubleshooting, please contact FLEXISPOT customer support.

8. Spesifikasi

Image: A diagram illustrating the adjustable foot width of the FLEXISPOT EJ2 desk frame, ranging from 111.6 cm to 148.6 cm, and showing compatible tabletop sizes for various lengths and widths.

9. Waranti dan Sokongan

FLEXISPOT komited untuk menyediakan produk berkualiti tinggi dan perkhidmatan pelanggan yang cemerlang.

• Waranti Pengilang: The FLEXISPOT EJ2 Electric Standing Desk Frame comes with a 5-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.
• Sokongan Pelanggan: FLEXISPOT offers dedicated customer support. For any inquiries, technical assistance, or warranty claims, please contact our support team. Support is available in Japanese.
• Maklumat Hubungan: Please refer to the official FLEXISPOT website or your purchase documentation for the most current customer support contact details.