MEEPO Campus V5 Series/Envy Electric Skateboard User Manual

1. Pengenalan

Welcome to the world of electric skateboarding with your new MEEPO Campus V5 Series/Envy Electric Skateboard. This manual provides essential information for the safe and optimal operation, maintenance, and care of your skateboard. Please read it thoroughly before your first ride to ensure a safe and enjoyable experience.

Figure 1: MEEPO Campus V5 Series/Envy Electric Skateboard (Top, Side, and Bottom Views)

2. Garis Panduan Keselamatan

Your safety is paramount. Electric skateboards can reach high speeds and require careful handling. Always adhere to the following safety guidelines:

• Pakai Alat Pelindung: Always wear a helmet, knee pads, elbow pads, and wrist guards.
• Check Your Board: Before each ride, inspect the board for any loose components, wheel damage, or battery issues.
• Understand Your Surroundings: Tunggang di kawasan yang selamat dan terbuka, jauh daripada lalu lintas, pejalan kaki dan halangan.
• Ketahui Had Anda: Start at low speeds and gradually increase as you become more comfortable.
• Keadaan Cuaca: Elakkan menunggang dalam keadaan basah, hujan lebat atau di permukaan yang licin.
• Undang-undang Tempatan: Be aware of and comply with all local laws and regulations regarding electric skateboards.
• Had Umur dan Berat: This product is suitable for adults and teens. The maximum load capacity is 330 pounds.

3. Kandungan Pakej

Upon unboxing your MEEPO Campus V5 Series/Envy Electric Skateboard, please verify that all the following items are included:

• MEEPO Campus V5 Series/Envy Electric Skateboard (NLS3)
• Alat Kawalan Jauh
• Pengecas
• T-Tool (for adjustments)
• Spare Belts (245mm)
• USB Charging Cable for Remote
• Manual Pengguna (dokumen ini)

Rajah 2: Komponen Termasuk

4. Persediaan & Pemasangan

4.1 Pemeriksaan Awal

Before your first ride, carefully inspect your skateboard for any signs of damage during shipping. Ensure all screws are tightened and wheels spin freely.

4.2 Mengecas Bateri

• Connect the charger to the charging port on the skateboard.
• Palamkan pengecas ke salur keluar dinding standard.
• The indicator light on the charger will change (e.g., red to green) when fully charged.
• Masa pengecasan adalah lebih kurang 2 jam untuk pengecasan penuh.

4.3 Berpasangan Kawalan Jauh

Your remote control should be pre-paired. If re-pairing is needed, refer to the specific instructions in the separate remote control manual or the official Meepo webtapak.

4.4 Wheel and Belt Installation/Adjustment

The NLS3 model uses belts for power transmission. Periodically check the tension and condition of these belts. If replacement is necessary, follow the steps demonstrated in the video below. Ensure the wheel is securely fastened after any adjustments or replacements.

Video: How to replace 245mm belts for NLS 3. This video demonstrates the process of removing and installing the drive belts on the MEEPO NLS3 electric skateboard, including loosening and tightening the necessary screws and properly seating the new belt.

5. Operating Your Electric Skateboard

5.1 Bermula

• Turn on the skateboard and the remote control.
• Ensure the remote is connected to the board (check remote display).
• Place one foot on the board, then push off with the other foot to gain initial momentum.
• Gently push the throttle on the remote to accelerate.

5.2 Fungsi Kawalan Jauh

The N5S Display Remote allows for precise control:

• Pendikit: Push forward to accelerate, pull back to brake.
• Mod Kelajuan: Switch between different speed modes (e.g., Beginner, Eco, Pro) to match your skill level and riding environment.
• paparan: Shows current speed, battery level (board and remote), and distance traveled.

5.3 Teknik Menunggang

• pendirian: Find a comfortable stance with your feet positioned over the trucks for balance.
• Berpusing: Lean into turns, similar to a traditional skateboard or snowboard.
• Brek: Apply brakes smoothly to avoid sudden stops. Regenerative braking helps recharge the battery.

Figure 3: Proper Riding Stance

6. Penyelenggaraan

Regular maintenance ensures the longevity and performance of your electric skateboard.

6.1 Penjagaan Bateri

• Cas bateri sepenuhnya selepas setiap penggunaan, terutamanya jika disimpan untuk tempoh yang lama.
• Jangan cas berlebihan atau habiskan bateri sepenuhnya.
• Store the board in a cool, dry place, away from direct sunlight and extreme temperatures.

6.2 Pembersihan dan Penyimpanan

• Wipe down the board with a damp cloth after each ride to remove dirt and debris.
• Avoid using harsh chemicals or excessive water, especially near electronic components.
• Store the board indoors in a dry environment.

6.3 Belt and Wheel Maintenance

• Regularly inspect drive belts for wear, cracks, or damage. Replace them as needed (refer to Section 4.4).
• Check wheels for cuts, cracks, or excessive wear.
• Ensure wheel nuts are tightened to prevent wobbling.
• Clean bearings periodically to maintain smooth wheel rotation.

Figure 4: Wheel and Motor Assembly

7. Penyelesaian masalah

If you encounter issues with your MEEPO electric skateboard, refer to the table below for common problems and solutions.

8. Spesifikasi

Key technical specifications for the MEEPO Campus V5 Series/Envy Electric Skateboard (NLS3):

Figure 5: Skateboard Components and Performance Overview

9. Waranti dan Sokongan

9.1 Maklumat Waranti

Your MEEPO Campus V5 Series/Envy Electric Skateboard comes with a limited warranty. Please refer to the official Meepo website or contact customer support for detailed warranty terms and conditions. The warranty period is typically 6 months from the date of purchase.

9.2 Sokongan Pelanggan

For any questions, technical assistance, or warranty claims, please contact Meepo customer support:

• rasmi Webtapak: www.meepoboard.com
• e-mel: info@meepoboard.com
• Sembang Langsung: Available on the official webtapak.
• Alamat: G/f Hang Wai Indctmo 6 Kin Tai St Tuen Mun Nt Hong Kong

Meepo is committed to providing high-quality products and excellent customer service. Your satisfaction is our priority.