ROBERTS 25-inch PrecisionCuts Pro Multi-Floor Cutter

1. Pengenalan

Thank you for choosing the ROBERTS 25-inch PrecisionCuts Pro Multi-Floor Cutter. This professional-grade tool is engineered for precise and efficient cutting of a wide range of flooring materials. This manual provides essential information for the safe and effective operation, maintenance, and care of your cutter. Please read it thoroughly before initial use and retain it for future reference.

Image 1.1: The ROBERTS 25-inch PrecisionCuts Pro Multi-Floor Cutter, showcasing its robust design and extended handle.

2. Maklumat Keselamatan

Always prioritize safety when operating any power or hand tool. Failure to follow these safety guidelines may result in serious injury or damage to the tool.

• Baca Manual: Understand all instructions and warnings before operating the cutter.
• Pakai Alat Pelindung Diri (PPE): Always wear safety glasses or goggles to protect against flying debris. Gloves are recommended to protect hands from sharp edges.
• Pastikan Kawasan Kerja Kosong: Ensure the work area is well-lit and free of clutter. Keep bystanders, especially children, away from the operating area.
• Bahan selamat: Always ensure the material to be cut is stable and properly positioned on the cutter's table.
• Bilah Tajam: The tungsten blade is extremely sharp. Handle with extreme care during operation, cleaning, and replacement.
• Permukaan Stabil: Place the cutter on a firm, level surface to prevent tipping or movement during operation.
• Cengkaman yang betul: Maintain a firm grip on the handle during cutting.
• Keselamatan Bateri: If installing a 9-volt battery for the built-in light, ensure correct polarity and use only recommended battery types. Remove battery during extended storage.

3. Produk Lebihview dan Komponen

Familiarize yourself with the main components of your Multi-Floor Cutter:

• Pemegang Lanjutan: Provides leverage for cutting.
• Sesondol Bersalut Keluli dengan Galas Bebola: Ensures smooth and powerful cutting action.
• Bilah Tungsten Tebal 4 mm: Durable, resharpenable, and replaceable blade for various materials.
• Bar Panduan Boleh Diubah Suai dengan Skru Pengunci: Allows for precise straight or angled cuts.
• Pembaris Terbina Dalam: Dilengkapi dengan inci dan milimeter untuk ukuran yang tepat.
• Cahaya Terbina dalam: Menerangi garisan pemotongan untuk ketepatan yang dipertingkatkan (memerlukan bateri 9 volt, dijual berasingan).
• Roda Pengangkutan: Facilitates easy movement and portability of the cutter.
• Large Hand Grip Opening: Integrated into the table for convenient carrying.

Image 3.1: Key components of the ROBERTS PrecisionCuts Pro Multi-Floor Cutter, including the extended handle, steel-encased cams, tungsten blade, and transport wheels.

4. Persediaan

Follow these steps to prepare your cutter for use:

1. Membongkar: Tanggalkan pemotong dari pembungkusannya dengan berhati-hati. Periksa sebarang kerosakan penghantaran.
2. penempatan: Position the cutter on a stable, level, and sturdy work surface capable of supporting its weight (approximately 51.9 pounds).
3. Battery Installation (for Built-in Light):
   • Locate the battery compartment, typically near the built-in light mechanism.
   • Insert a 9-volt battery (sold separately), ensuring correct polarity (+/-).
   • Tutup petak bateri dengan selamat.
4. Pelarasan Bar Panduan: The guide bar can be moved for straight or angled cuts. Loosen the locking screw, position the guide bar as needed, and then tighten the screw firmly.

Imej 4.1: Sisi view of the cutter, showing the transport wheels for easy repositioning.

5. Arahan Operasi

This cutter is designed to cut various materials up to 25 inches wide and 5/8 inch (16mm) thick. Compatible materials include:

• Lantai Kayu Kejuruteraan
• Lantai Laminate
• Lantai Vinyl
• Tile Carpet
• Jubin VCT
• parket
• Siding Vinyl
• Siding Simen
• Getah
• buih
• PVC

Image 5.1: Visual representation of the diverse materials compatible with the ROBERTS Multi-Floor Cutter.

5.1. Making a Straight Cut

1. Bar Panduan Kedudukan: Ensure the guide bar is set for a 90-degree straight cut. Use the built-in ruler for precise measurement. Tighten the locking screw.
2. Ukur dan Tandakan: Measure and mark your desired cut line on the material.
3. Bahan Tempat: Place the material on the cutter's table, aligning your mark with the blade's cutting path. Ensure the material is flush against the guide bar.
4. Activate Light (Optional): If desired, turn on the built-in light to illuminate the cutting line for enhanced visibility.
5. Potong: Firmly grasp the handle and apply steady, downward pressure to make the cut. Allow the blade to pass completely through the material.
6. Keluarkan Bahan: Carefully remove the cut material.

5.2. Making an Angled Cut

1. Adjust Guide Bar: Loosen the locking screw on the guide bar. Pivot the guide bar to the desired angle (e.g., 45 degrees). Use the angle markings on the table for reference. Tighten the locking screw securely.
2. Ukur dan Tandakan: Measure and mark your desired angled cut line on the material.
3. Bahan Tempat: Place the material on the cutter's table, aligning your mark with the blade's cutting path and flush against the angled guide bar.
4. Activate Light (Optional): Turn on the built-in light for better visibility of the angled cut line.
5. Potong: Apply steady, downward pressure on the handle to execute the angled cut.
6. Keluarkan Bahan: Carefully remove the cut material.

Image 5.2: Detail of the repositionable guide bar, built-in ruler with inches and millimeters, and angle settings for precise cuts.

Image 5.3: Demonstrating the activation of the built-in light for improved cutting precision.

6. Penyelenggaraan

Penyelenggaraan yang kerap memastikan jangka hayat dan prestasi optimum pemotong anda.

• Pembersihan: After each use, wipe down the cutter with a dry cloth to remove dust and debris. For stubborn residue, use a damp cloth and mild detergent, then dry thoroughly. Do not use harsh chemicals or abrasive cleaners.
• Penjagaan Bilah: The 4 mm thick tungsten blade is resharpenable. If cuts become less clean or require excessive force, the blade may need sharpening or replacement. Consult a professional sharpening service or replace with a genuine ROBERTS replacement blade.
• Pelinciran: Periodically apply a light machine oil to the moving parts, such as the cam mechanisms and guide bar slides, to ensure smooth operation.
• Storan: Store the cutter in a clean, dry place, away from moisture and extreme temperatures. Ensure the handle is in the down position and the blade is protected. Remove the 9-volt battery if storing for an extended period.

7. Penyelesaian masalah

Rujuk bahagian ini untuk isu biasa dan penyelesaiannya:

8. Spesifikasi

Image 8.1: Key dimensions and cutting capacities of the ROBERTS PrecisionCuts Pro Multi-Floor Cutter.

9. Waranti dan Sokongan

For information regarding warranty coverage, product support, or to purchase replacement parts, please refer to the official ROBERTS website or contact their customer service department. Specific warranty terms may vary and are typically provided with the product at the time of purchase or available on the manufacturer's official channels.

Rasmi ROBERTS Webtapak: www.robertsconsolidated.com