ANTEC GSK850 ATX3.1 850W Full Modular PSU Instruction Manual

1. Pengenalan

Thank you for choosing the Antec GSK850 ATX3.1 850W Full Modular Power Supply Unit (PSU). This manual provides essential information for the proper installation, operation, and maintenance of your new power supply. The GSK850 is designed to deliver stable and efficient power to your computer system, featuring ATX3.1 and PCIe 5.1 compatibility, 80 PLUS Gold certification, and a full modular design for optimized cable management.

Figure 1.1: Antec GSK850 850W Full Modular Power Supply Unit

2. Maklumat Keselamatan

Please read and follow all safety instructions carefully before installing or operating the PSU. Failure to do so may result in personal injury or damage to the product or system components.

• Bahaya Elektrik: Jangan buka PSU casing. vol tinggitagterdapat di dalam, walaupun unit dicabut daripada plag. Tiada bahagian yang boleh diservis pengguna di dalamnya.
• Pengudaraan: Ensure adequate ventilation around the PSU. Do not block the fan or ventilation openings.
• Kelembapan: Do not expose the PSU to water or excessive humidity.
• Suhu: Operate the PSU within the specified temperature range. Avoid extreme heat or cold.
• Pembumian: Always connect the PSU to a grounded power outlet.
• Matikan: Always disconnect the AC power cord from the wall outlet before installing, removing, or servicing the PSU or any connected components.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• Antec GSK850 ATX3.1 850W Full Modular Power Supply Unit
• Modular Cable Set (see Section 4.2 for details)
• Kord Kuasa AC
• Skru Pemasangan
• Manual Pengguna (dokumen ini)

4. Produk Lebihview

4.1 Ciri-ciri Utama

• ATX3.1 & PCIe 5.1 Compatible: Designed to meet the latest standards for reliability and power efficiency, ensuring compatibility with modern hardware, including NVIDIA GeForce RTX 40 Series graphics cards.
• 80 PLUS Emas Disahkan: Achieves high power efficiency, reducing energy consumption and heat generation.
• Full Modular Cable Management: Allows users to connect only the necessary cables, improving airflow and reducing clutter inside the PC case.
• High-Quality Japanese Capacitors: Ensures tight voltage regulation, minimal ripple and noise, and extended lifespan.
• PhaseWave Design (LLC + DC-DC): Provides stable and efficient power delivery.
• Zero RPM Manager: The fan remains off at low loads for silent operation, activating only when necessary.
• 120mm FDB Silent Fan: Features a fluid-dynamic bearing fan for quiet operation and durability.
• CircuitShield Protection Suite: Comprehensive industrial-grade protections including OCP, OVP, UVP, SCP, OPP, OTP, SIP, and NLO for system safety.

4.2 Modular Cable Management and Compatibility

The full modular design of the GSK850 allows for flexible cable management, enabling you to use only the cables required for your system. This reduces cable clutter, improves internal airflow, and simplifies installation.

Figure 4.1: Modular Cable Connectors and ATX 3.1 / PCIe 5.1 Compatibility

Figure 4.2: Detailed Cable and Connector Information

4.3 Komponen dan Reka Bentuk Dalaman

The GSK850 incorporates high-quality components for reliable performance and longevity.

Figure 4.3: High-Quality Japanese Capacitors for enhanced stability and lifespan.

Figure 4.4: PhaseWave Design (LLC + DC-DC) for superior power delivery efficiency.

4.4 Sistem Penyejukan

The PSU features an advanced cooling system to maintain optimal temperatures and quiet operation.

Figure 4.5: Zero RPM Manager fan curve, illustrating silent operation at low loads.

Figure 4.6: The 120mm Fluid-Dynamic Bearing (FDB) fan provides high airflow with low noise.

4.5 Compact Size

The GSK850 is designed with a compact form factor, making it suitable for a wide range of PC cases.

Figure 4.7: Compact dimensions of the GSK850 PSU, showing reduced volume compared to larger units.

5. Persediaan dan Pemasangan

Follow these steps to install your Antec GSK850 PSU into your computer system:

1. Sediakan Sistem Anda: Pastikan komputer anda dimatikan sepenuhnya dan dicabut dari soket dinding. Buka bekas komputer anda.
2. Keluarkan PSU Lama (jika berkenaan): If replacing an existing PSU, disconnect all cables from the old PSU and remove its mounting screws. Carefully slide it out of the case.
3. Pasang PSU Baharu: Slide the Antec GSK850 into the PSU mounting bay of your computer case. Align the screw holes and secure the PSU with the provided mounting screws.
4. Sambungkan Kabel Penting: Refer to Figure 4.2 for cable types and lengths. Connect the necessary modular cables to the PSU first, then to your motherboard and components:
   • Kabel Papan Induk ATX 24-pin: Sambungkan ke penyambung kuasa utama motherboard anda.
   • 8-pin (4+4) CPU Power Cable(s): Sambungkan ke penyambung kuasa CPU motherboard anda.
   • PCIe 5.1 12VHPWR (16-pin) or 8-pin (6+2) PCIe Cables: Connect to your graphics card(s) as required.
   • Kabel Kuasa SATA: Connect to SSDs, HDDs, and optical drives.
   • Kabel Molex: Connect to any peripherals requiring Molex power.
5. Pengurusan Kabel: Route cables neatly behind the motherboard tray or in designated cable management areas to improve airflow and aesthetics.
6. Tutup Kes dan Sambungkan Kuasa: Once all connections are secure, close your computer case. Plug the AC power cord into the PSU and then into a grounded wall outlet.

6. Arahan Operasi

Operating the Antec GSK850 PSU is straightforward:

• Hidupkan kuasa: After installation, ensure the power switch on the back of the PSU is in the 'ON' (I) position. Then, power on your computer using the case's power button.
• Mod RPM sifar: The PSU's fan will remain off when the power load is low, providing silent operation. As the system load increases, the fan will automatically activate and adjust its speed to maintain optimal temperatures. This is normal operation and indicates the Zero RPM Manager is functioning correctly.
• Matikan: To power off your system, use the operating system's shutdown function. For complete power disconnection, switch the PSU's power switch to the 'OFF' (O) position and unplug the AC power cord from the wall outlet.

7. Penyelenggaraan

Penyelenggaraan yang betul memastikan jangka hayat dan prestasi optimum PSU anda:

• Penyingkiran habuk: Periodically clean dust from the PSU's fan grille and ventilation openings using compressed air. Ensure the PSU is powered off and unplugged before cleaning.
• Pemeriksaan Kabel: Occasionally inspect all connected cables for any signs of wear, damage, or loose connections.
• Persekitaran: Ensure the PSU operates in a clean, dry, and well-ventilated environment.

8. Penyelesaian masalah

If you encounter issues with your Antec GSK850 PSU, refer to the following common troubleshooting steps:

• Tiada Kuasa:
  • Pastikan kord kuasa AC dipasang dengan selamat pada kedua-dua PSU dan alur keluar dinding.
  • Check that the PSU's power switch on the back is in the 'ON' (I) position.
  • Verify all modular cables are securely connected to both the PSU and the components.
  • Uji alur keluar dinding dengan peranti lain untuk memastikan ia mempunyai kuasa.
• Ketidakstabilan/Ranap Sistem:
  • Pastikan wat PSU andatage mencukupi untuk semua komponen sistem anda.
  • Periksa sambungan kabel yang longgar.
  • The PSU's CircuitShield protection suite (OCP, OVP, UVP, SCP, OPP, OTP, SIP, NLO) will automatically shut down the PSU in case of an electrical fault to protect your components. If this occurs, disconnect power, check for short circuits or faulty components, and then attempt to restart.
  

  Figure 8.1: CircuitShield Protection Suite

• Kipas Tidak Berpusing:
  • The GSK850 features Zero RPM mode. The fan will not spin at low loads. This is normal. The fan will activate when the system load increases.
  • If the fan does not spin even under high load, ensure there are no obstructions and contact support if the issue persists.

If the problem persists after following these steps, please contact Antec customer support.

9. Spesifikasi

10. Waranti dan Sokongan

The Antec GSK850 ATX3.1 850W Full Modular PSU comes with a Waranti 7 Tahun dari tarikh pembelian. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa.

For technical support, warranty claims, or further assistance, please visit the official Antec webtapak atau hubungi bahagian perkhidmatan pelanggan mereka. Simpan bukti pembelian anda untuk pengesahan waranti.

Antec Official Webtapak: www.antec.com